Remove most of the variables from the autoexec.bat template

Instead use a *.report file for each component and add data as we
go, culminating in the built image simply catting the report to the
screen to show the user what is about to occur.

This is on the path towards removing all variables from the autoexec
template - which would make it simpler to reuse the same template for
other commands (e.g the x200 series does not use dosflash.exe)

.gitignore

@@ -13,6 +13,7 @@
 
 # ignore generated files
 *.bat
+*.report
 .d
 
 # Temp are (should be) just junk

Makefile

@@ -40,7 +40,7 @@ $(shell mkdir -p $(DEPSDIR))
 clean:
 	rm -f $(CLEAN_FILES) \
             patched.*.iso patched.*.img *.FL2 *.FL2.orig *.img.enc \
-            *.img.enc.orig *.img.orig *.bat \
+            *.img.enc.orig *.img.orig *.bat *.report \
             *.img \
             *.txt.orig
 	rm -rf *.iso.extract *.iso.orig.extract
@@ -195,14 +195,14 @@ endef
 # Generate a working file with any known patches applied
 %.img: %.img.orig
 	cp --reflink=auto $< $@
-	./scripts/hexpatch.pl --rm_on_fail $@ $@.d/*.patch
+	./scripts/hexpatch.pl --rm_on_fail --report $@.report $@ $@.d/*.patch
 
 # using both __DIR and __FL2 is a hack to get around needing to quote the
 # DOS path separator.  It feels like there should be a better way if I put
 # my mind to it..
 #
 %.iso.bat: %.iso.orig autoexec.bat.template
-	sed -e "s%__DIR%`mdir -/ -b -i $<@@$(FAT_OFFSET) |grep FL2 |head -1|cut -d/ -f3`%; s%__FL2%`mdir -/ -b -i $<@@$(FAT_OFFSET) |grep FL2 |head -1|cut -d/ -f4`%; s%__DESC%`scripts/describe $(basename $<)`%; s/__BUILDINFO/$(BUILDINFO)/" autoexec.bat.template >$@.tmp
+	sed -e "s%__DIR%`mdir -/ -b -i $<@@$(FAT_OFFSET) |grep FL2 |head -1|cut -d/ -f3`%; s%__FL2%`mdir -/ -b -i $<@@$(FAT_OFFSET) |grep FL2 |head -1|cut -d/ -f4`%" autoexec.bat.template >$@.tmp
 	mv $@.tmp $@
 	touch -d @1 $@
 
@@ -246,14 +246,14 @@ GETELTORITO := ./scripts/geteltorito
 	$(GETELTORITO) -o $@.tmp $<
 	./scripts/fix_mbr $@.tmp
 	mv $@.tmp $@
-	$(call build_info,$<.bat)
+	$(call build_info,$<.report)
 
 # $1 is the lenovo named iso
 # $2 is the nicely named iso
 define patched_iso
 	mv $1 $2
-	mv $1.bat $2.bat
-	$(call build_info,$2.bat)
+	mv $1.report $2.report
+	$(call build_info,$2.report)
 endef
 
 # $1 is the bat file
@@ -261,7 +261,27 @@ define build_info
 	@echo
 	@echo
 	@echo Your build has completed with the following details:
-	@grep Buil $1
+        @echo
+	@cat $1
+endef
+
+# Add information about the FL2 file to the current report
+# $< is the IMG file
+# $@ is the FL2 file being inserted into
+define buildinfo_FL2
+    echo "Buildinfo: $(BUILDINFO)" >$@.report
+    echo "Built: `sha1sum $@`" >>$@.report
+    echo "" >>$@.report
+    cat $<.report >>$@.report
+endef
+
+# Add information about the ISO file to the current report
+# $< is the FL2 file
+# $@ is the ISO file being inserted into
+define buildinfo_ISO
+    cp $<.report $@.report
+    echo "" >>$@.report
+    echo "Description: `scripts/describe $@`" >>$@.report
 endef
 
 # simple testing of images in an emulator
@@ -317,8 +337,9 @@ rule_IMG_extract_DEPS = scripts/FL2_copyIMG mec-tools/mec_encrypt mec-tools/mec_
 define rule_FL2_insert
     cp --reflink=auto $@.orig $@.tmp
     ./scripts/ISO_copyFL2 to_iso $@.tmp $< $(1)
-    sed -i "s/__BUILT/`sha1sum $<`/" $@.bat
-    mcopy -m -o -i $@.tmp@@$(FAT_OFFSET) $@.bat ::AUTOEXEC.BAT
+    $(call buildinfo_ISO)
+    mcopy -t -m -o -i $@.tmp@@$(FAT_OFFSET) $@.report ::report.txt
+    mcopy -t -m -o -i $@.tmp@@$(FAT_OFFSET) $@.bat ::AUTOEXEC.BAT
     -mdel -i $@.tmp@@$(FAT_OFFSET) ::EFI/Boot/BootX64.efi
     mv $@.tmp $@
 endef
@@ -327,6 +348,10 @@ rule_FL2_insert_DEPS = scripts/ISO_copyFL2 # TODO - bat file
 # - maybe mdel any FL1 files, so the image can not accidentally be used to
 #   flash the BIOS?
 # - only delete the UEFI updater if it exists in the original ISO
+# - continue removing variables from the AUTOEXEC bat - perhaps calculate
+#   its contents here
+# - provide a simple mechanism for selecting the flash command to run, to
+#   allow for autoexec bat files that do not use dosflash
 
 # Insert the new firmware into the FL2 file
 #
@@ -338,6 +363,7 @@ define rule_IMG_insert
     ./scripts/FL2_copyIMG to_fl2 $@.tmp $<.enc.tmp
     rm $<.enc.tmp
     mv $@.tmp $@
+    $(call buildinfo_FL2)
 endef
 rule_IMG_insert_DEPS = scripts/FL2_copyIMG scripts/xx30.encrypt
 
@@ -360,6 +386,7 @@ define rule_IMGnoenc_insert
     cp --reflink=auto $@.orig $@.tmp
     ./scripts/FL2_copyIMG to_fl2 $@.tmp $<
     mv $@.tmp $@
+    $(call buildinfo_FL2)
 endef
 rule_IMGnoenc_insert_DEPS = scripts/FL2_copyIMG
 

autoexec.bat.template

@@ -1,24 +1,20 @@
-@ECHO OFF
-PROMPT $p$g
-cd c:\flash
-cls
-echo.
-echo.
-echo This will flash your firmware to support a classic 7-row keyboard
-echo.
-echo.
-echo WARNING: Incorrectly flashing your firmware can damage your laptop.
-echo Ensure this is the right firmware version before attempting to flash
-echo the firmware - there are minimal checks done.
-echo.
-echo This disc will flash the file __DIR\__FL2
-echo.
-echo This disk is prepared for __DESC
-echo.
-echo Buildinfo: __BUILDINFO
-echo Built: __BUILT
-echo.
-pause
-echo on
-dosflash /sd /ipf ec /file __DIR\__FL2
-
+@ECHO OFF
+PROMPT $p$g
+cd c:\flash
+cls
+echo.
+echo.
+echo This will flash your Embedded controller firmware
+echo.
+echo.
+echo WARNING: Incorrectly flashing your firmware can damage your laptop.
+echo Ensure this is the right firmware version before attempting to flash
+echo the firmware - there are minimal checks done.
+echo.
+echo This disc will flash the file __DIR\__FL2
+echo.
+type c:\report.txt
+echo.
+pause
+echo on
+dosflash /sd /ipf ec /file __DIR\__FL2

scripts/hexpatch.pl

@@ -20,7 +20,7 @@ sub usage() {
     print("patching the right file\n");
     print("\n");
     print("Usage:\n");
-    print("    hexpatch.pl [--rm_on_fail] binaryfile patchfile [patchfile...]\n");
+    print("  hexpatch.pl [--rm_on_fail] [--report file] binaryfile patchfile [patchfile...]\n");
     print("\n");
     exit(1);
 }
@@ -138,6 +138,7 @@ sub verify_context {
         $fh->seek($addr,SEEK_SET);
         $fh->read($found,length($expected));
 
+        # TODO - if found eq new warn "patch reversed?"
         if ($found ne $expected) {
             warn("Address $addr mismatched data\n");
             return undef;
@@ -167,6 +168,40 @@ sub apply_patch {
     }
 }
 
+sub output_report {
+    my $filename = shift;
+    my @patches = @_;
+
+    my $fh = IO::File->new($filename, "w");
+    if (!defined($fh)) {
+        warn("Could not open report file $filename: $!\n");
+        exit(1);
+    }
+
+    if (!@patches) {
+        $fh->print("No patches applied: Lenovo default firmware\n");
+        return;
+    }
+
+    $fh->print("Patches applied:\n");
+    my $line = "";
+    for my $patch (@patches) {
+        if (length($line)+length($patch)+1 > 79) {
+            $line .= "\n";
+            $fh->print($line);
+            $line = "";
+        }
+        if ($line) {
+            $line .= " ";
+        }
+        $line .= $patch;
+    }
+    if ($line) {
+        $line .= "\n";
+        $fh->print($line);
+    }
+}
+
 sub rm_on_fail {
     my ($bool, $filename) = @_;
 
@@ -182,6 +217,12 @@ sub main() {
         shift @ARGV;
     }
 
+    my $reportfile;
+    if (defined($ARGV[0]) && $ARGV[0] eq "--report") {
+        shift @ARGV;
+        $reportfile=shift @ARGV;
+    }
+
     my $binaryfile = shift @ARGV;
     if (!defined($binaryfile) or !defined($ARGV[0])) {
         usage();
@@ -195,6 +236,7 @@ sub main() {
 
     print("Attempting to patch $binaryfile\n");
 
+    my @report_patches;
     while ($ARGV[0]) {
         my $patchfile = shift @ARGV;
 
@@ -219,6 +261,11 @@ sub main() {
 
         print("Applying ",$patchfile," ",$db->{name},"\n");
         apply_patch($db,$fh);
+        push @report_patches,$patchfile;
+    }
+
+    if ($reportfile) {
+        output_report($reportfile,@report_patches);
     }
 }
 main();