diff --git a/dev/debug_osync.sh b/dev/debug_osync.sh
index 5544d7f..7011cf5 100755
--- a/dev/debug_osync.sh
+++ b/dev/debug_osync.sh
@@ -45,7 +45,7 @@ IS_STABLE=no
 
 #### MINIMAL-FUNCTION-SET BEGIN ####
 
-## FUNC_BUILD=2016090602
+## FUNC_BUILD=2016090701
 ## BEGIN Generic bash functions written in 2013-2016 by Orsiris de Jong - http://www.netpower.fr - ozy@netpower.fr
 
 ## To use in a program, define the following variables:
@@ -771,13 +771,16 @@ function WaitForTaskCompletion {
 
 # Take a list of commands to run, runs them sequentially with numberOfProcesses commands simultaneously runs
 # Returns the number of non zero exit codes from commands
+# Use cmd1;cmd2;cmd3 syntax for small sets, use file for large command sets
 function ParallelExec {
 	local numberOfProcesses="${1}" # Number of simultaneous commands to run
 	local commandsArg="${2}" # Semi-colon separated list of commands, or file containing one command per line
+	local readFromFile="${3:-false}" # Is commandsArg a file or a string ?
+
+	__CheckArguments 3 $# ${FUNCNAME[0]} "$@"				#__WITH_PARANOIA_DEBUG
 
 	local commandCount
 	local command
-	local readFromFile=false
 	local pid
 	local counter=0
 	local commandsArray
@@ -790,9 +793,12 @@ function ParallelExec {
 
 	local hasPids=false # Are any valable pids given to function ?		#__WITH_PARANOIA_DEBUG
 
-	if [ -f "$commandsArg" ]; then
-		commandCount=$(wc -l < "$commandsArg")
-		readFromFile=true
+	if [ $readFromFile == true ];then
+		if [ -f "$commandsArg" ]; then
+			commandCount=$(wc -l < "$commandsArg")
+		else
+			commandCount=0
+		fi
 	else
 		IFS=';' read -r -a commandsArray <<< "$commandsArg"
 		commandCount=${#commandsArray[@]}
@@ -804,6 +810,7 @@ function ParallelExec {
 
 		while [ $counter -lt "$commandCount" ] && [ ${#pidsArray[@]} -lt $numberOfProcesses ]; do
 			if [ $readFromFile == true ]; then
+				#TODO: Checked on FreeBSD 10, also check on Win
 				command=$(awk 'NR == num_line {print; exit}' num_line=$((counter+1)) "$commandsArg")
 			else
 				command="${commandsArray[$counter]}"
diff --git a/install.sh b/install.sh
index 789e335..7a45430 100755
--- a/install.sh
+++ b/install.sh
@@ -4,7 +4,7 @@ PROGRAM=osync
 PROGRAM_VERSION=1.2-beta
 PROGRAM_BINARY=$PROGRAM".sh"
 PROGRAM_BATCH=$PROGRAM"-batch.sh"
-SCRIPT_BUILD=2016082901
+SCRIPT_BUILD=2016090605
 
 ## osync / obackup / pmocr / zsnap install script
 ## Tested on RHEL / CentOS 6 & 7, Fedora 23, Debian 7 & 8, Mint 17 and FreeBSD 8 & 10
@@ -26,7 +26,7 @@ OSYNC_SERVICE_FILE_SYSTEMD_USER="osync-srv@.service.user"
 
 ## pmocr specfic code
 PMOCR_SERVICE_FILE_INIT="pmocr-srv"
-PMOCR_SERVICE_FILE_SYSTEMD_SYSTEM="pmocr-srv.service"
+PMOCR_SERVICE_FILE_SYSTEMD_SYSTEM="pmocr-srv@.service"
 
 ## Generic code
 
@@ -141,19 +141,28 @@ function CreateConfDir {
 
 function CopyExampleFiles {
 	if [ -f "./sync.conf.example" ]; then
-		cp "./sync.conf.example" "$FAKEROOT/etc/$PROGRAM/sync.conf.example"
+		cp "./sync.conf.example" "$CONF_DIR/sync.conf.example"
 	fi
 
 	if [ -f "./host_backup.conf.example" ]; then
-		cp "./host_backup.conf.example" "$FAKEROOT/etc/$PROGRAM/host_backup.conf.example"
+		cp "./host_backup.conf.example" "$CONF_DIR/host_backup.conf.example"
 	fi
 
 	if [ -f "./exlude.list.example" ]; then
-		cp "./exclude.list.example" "$FAKEROOT/etc/$PROGRAM"
+		cp "./exclude.list.example" "$CONF_DIR/exclude.list.example"
 	fi
 
 	if [ -f "./snapshot.conf.example" ]; then
-		cp "./snapshot.conf.example" "$FAKEROOT/etc/$PROGRAM/snapshot.conf.example"
+		cp "./snapshot.conf.example" "$CONF_DIR/snapshot.conf.example"
+	fi
+
+	if [ -f "./default.conf" ]; then
+		if [ -f "$CONF_DIR/default.conf" ]; then
+			cp "./default.conf" "$CONF_DIR/default.conf.new"
+			QuickLogger "Copied default.conf to [$CONF_DIR/default.conf.new]."
+		else
+			cp "./default.conf" "$CONF_DIR/default.conf"
+		fi
 	fi
 }
 
@@ -200,7 +209,7 @@ function CopyServiceFiles {
 			QuickLogger "Cannot copy the systemd file to [$SERVICE_DIR_SYSTEMD_SYSTEM] or [$SERVICE_DIR_SYSTEMD_USER]."
 		else
 			QuickLogger "Created osync-srv service in [$SERVICE_DIR_SYSTEMD_SYSTEM] and [$SERVICE_DIR_SYSTEMD_USER]."
-			QuickLogger "Can be activated with [systemctl start osync-srv@instance.conf] where instance.conf is the name of the config file in /etc/osync."
+			QuickLogger "Can be activated with [systemctl start osync-srv@instance.conf] where instance.conf is the name of the config file in $CONF_DIR."
 			QuickLogger "Can be enabled on boot with [systemctl enable osync-srv@instance.conf]."
 			QuickLogger "In userland, active with [systemctl --user start osync-srv@instance.conf]."
 		fi
@@ -223,8 +232,8 @@ function CopyServiceFiles {
 			QuickLogger "Cannot copy the systemd file to [$SERVICE_DIR_SYSTEMD_SYSTEM] or [$SERVICE_DIR_SYSTEMD_USER]."
 		else
 			QuickLogger "Created pmocr-srv service in [$SERVICE_DIR_SYSTEMD_SYSTEM] and [$SERVICE_DIR_SYSTEMD_USER]."
-			QuickLogger "Can be activated with [systemctl start pmocr-srv] after configuring file options in [$BIN_DIR/$PROGRAM]."
-			QuickLogger "Can be enabled on boot with [systemctl enable pmocr-srv]."
+			QuickLogger "Can be activated with [systemctl start pmocr-srv@default.conf] where default.conf is the name of the config file in $CONF_DIR."
+			QuickLogger "Can be enabled on boot with [systemctl enable pmocr-srv@default.conf]."
 		fi
 	elif ([ "$init" == "initV" ] && [ -f "./$PMOCR_SERVICE_FILE_INIT" ]); then
 		cp "./$PMOCR_SERVICE_FILE_INIT" "$SERVICE_DIR_INIT"
diff --git a/osync.sh b/osync.sh
index dbcdcfb..ae58b3d 100755
--- a/osync.sh
+++ b/osync.sh
@@ -11,7 +11,7 @@ IS_STABLE=no
 
 #### MINIMAL-FUNCTION-SET BEGIN ####
 
-## FUNC_BUILD=2016090602
+## FUNC_BUILD=2016090701
 ## BEGIN Generic bash functions written in 2013-2016 by Orsiris de Jong - http://www.netpower.fr - ozy@netpower.fr
 
 ## To use in a program, define the following variables:
@@ -712,13 +712,15 @@ function WaitForTaskCompletion {
 
 # Take a list of commands to run, runs them sequentially with numberOfProcesses commands simultaneously runs
 # Returns the number of non zero exit codes from commands
+# Use cmd1;cmd2;cmd3 syntax for small sets, use file for large command sets
 function ParallelExec {
 	local numberOfProcesses="${1}" # Number of simultaneous commands to run
 	local commandsArg="${2}" # Semi-colon separated list of commands, or file containing one command per line
+	local readFromFile="${3:-false}" # Is commandsArg a file or a string ?
+
 
 	local commandCount
 	local command
-	local readFromFile=false
 	local pid
 	local counter=0
 	local commandsArray
@@ -730,9 +732,12 @@ function ParallelExec {
 	local commandsArrayPid
 
 
-	if [ -f "$commandsArg" ]; then
-		commandCount=$(wc -l < "$commandsArg")
-		readFromFile=true
+	if [ $readFromFile == true ];then
+		if [ -f "$commandsArg" ]; then
+			commandCount=$(wc -l < "$commandsArg")
+		else
+			commandCount=0
+		fi
 	else
 		IFS=';' read -r -a commandsArray <<< "$commandsArg"
 		commandCount=${#commandsArray[@]}
@@ -744,6 +749,7 @@ function ParallelExec {
 
 		while [ $counter -lt "$commandCount" ] && [ ${#pidsArray[@]} -lt $numberOfProcesses ]; do
 			if [ $readFromFile == true ]; then
+				#TODO: Checked on FreeBSD 10, also check on Win
 				command=$(awk 'NR == num_line {print; exit}' num_line=$((counter+1)) "$commandsArg")
 			else
 				command="${commandsArray[$counter]}"