When the VPS is behind the nat device, the vps network card IP is the intranet IP. At this time, you can use the -g parameter to add the vps external network ip to prevent the infinite loop.
When the VPS is behind the nat device, the vps network interface IP is the intranet IP. At this time, you can use the -g parameter to add the vps external network ip to prevent the infinite loop.
Suppose your vps external network ip is 23.23.23.23. The following command sets 23.23.23.23 with the -g parameter.
@ -717,17 +717,17 @@ For example, this machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `8
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
s
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, and then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, such as: `--bind-ip eth0.*:7777`, then the client accesses the port `7777`, and the egress IP is randomly selected from the IP of the network card starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, and then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, such as: `--bind-ip eth0.*:7777`, then the client accesses the port `7777`, and the egress IP is randomly selected from the IP of the network interface starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:777`, then the client accesses the `7777` port, the outgoing IP is all the IPs of the machine, and matches the IP of `192.168.?.*` A randomly selected one.
- It can also be several combinations of network card name and IP, and several selective divisions using half-width, such as: `-bind-ip pppoe??,192.168.?.*:7777`, and then the client accesses the `7777` port , The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be several combinations of network interface name and IP, and several selective divisions using half-width, such as: `-bind-ip pppoe??,192.168.?.*:7777`, and then the client accesses the `7777` port , The outgoing IP is the machine's network interface name matching `pppoe??`
It is randomly selected from the IP matching `192.168.?.*` in the machine IP.
- The wildcard character `*` represents 0 to any character, `? `Represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 1.17 Certificate parameters use base64 data
@ -848,16 +848,16 @@ For example, this machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `8
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 2.8 Speed limit, connections limit
@ -1372,16 +1372,16 @@ For example, the machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `88
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one. The details are as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one. The details are as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 5.15 Cascade Certification
@ -1657,16 +1657,16 @@ For example, the machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `88
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one. The details are as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one. The details are as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
When the VPS is behind the nat device, the vps network card IP is the intranet IP. At this time, you can use the -g parameter to add the vps external network ip to prevent the infinite loop.
When the VPS is behind the nat device, the vps network interface IP is the intranet IP. At this time, you can use the -g parameter to add the vps external network ip to prevent the infinite loop.
Suppose your vps external network ip is 23.23.23.23. The following command sets 23.23.23.23 with the -g parameter.
@ -511,17 +511,17 @@ For example, this machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `8
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
s
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, and then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, such as: `--bind-ip eth0.*:7777`, then the client accesses the port `7777`, and the egress IP is randomly selected from the IP of the network card starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, and then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, such as: `--bind-ip eth0.*:7777`, then the client accesses the port `7777`, and the egress IP is randomly selected from the IP of the network interface starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:777`, then the client accesses the `7777` port, the outgoing IP is all the IPs of the machine, and matches the IP of `192.168.?.*` A randomly selected one.
- It can also be several combinations of network card name and IP, and several selective divisions using half-width, such as: `-bind-ip pppoe??,192.168.?.*:7777`, and then the client accesses the `7777` port , The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be several combinations of network interface name and IP, and several selective divisions using half-width, such as: `-bind-ip pppoe??,192.168.?.*:7777`, and then the client accesses the `7777` port , The outgoing IP is the machine's network interface name matching `pppoe??`
It is randomly selected from the IP matching `192.168.?.*` in the machine IP.
- The wildcard character `*` represents 0 to any character, `? `Represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 1.17 Certificate parameters use base64 data
@ -642,16 +642,16 @@ For example, this machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `8
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one can be specified. The detailed description is as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 2.8 Speed limit, connections limit
@ -1166,16 +1166,16 @@ For example, the machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `88
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one. The details are as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one. The details are as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
### 5.15 Cascade Certification
@ -1451,16 +1451,16 @@ For example, the machine has IP `5.5.5.5`, `6.6.6.6`, and monitors two ports `88
Then the client access port `7777`, the outgoing IP is `5.5.5.5`, access port `8888`, the outgoing IP is `6.6.6.6`, if both `--bind-ip` and `--bind- are set at the same time listen`,`--bind-ip` has higher priority.
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network card name`, `wildcards`, and more than one. The details are as follows:
In addition, the `IP` part of the `--bind-ip` parameter supports specifying the `network interface name`, `wildcards`, and more than one. The details are as follows:
- Specify the network card name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network card.
- The network card name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network card IPs starting with `eth0.`.
- Specify the network interface name, such as: `--bind-ip eth0:7777`, then the client accesses the `7777` port, and the egress IP is the IP of the eth0 network interface.
- The network interface name supports wildcards, for example: `--bind-ip eth0.*:7777`, then the client accesses the `7777` port, and the egress IP is a randomly selected one of the network interface IPs starting with `eth0.`.
- IP supports wildcards, such as: `--bind-ip 192.168.?.*:7777`, then the client accesses the `7777` port, and the exit IP is all the IPs of the machine, matching the IP of `192.168.?.*` A randomly selected one.
- It can also be multiple combinations of network card name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network card name matching `pppoe??`
- It can also be multiple combinations of network interface name and IP, separated by half-width commas, such as: `--bind-ip pppoe??,192.168.?.*:7777`, then the client accesses the port `7777`, The outgoing IP is the machine's network interface name matching `pppoe??`
It is a randomly selected one among all IPs of the machine that matches `192.168.?.*`.
- The wildcard character `*` represents 0 to any number of characters, and `?` represents 1 character.
- If the IP of the network card changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network card information, the default is `5`, the unit is second.
- If the IP of the network interface changes, it will take effect in real time.
- You can use the `--bind-refresh` parameter to specify the interval to refresh the local network interface information, the default is `5`, the unit is second.
arraykeys
3 years ago