New home at Framagit (and emphasizes it is unmaintained)

Added support for an HTTP 204 No Content response code

README.md

@@ -0,0 +1,65 @@
+echoping
+========
+
+echoping **was** a small program to test (approximatively) performances of a remote host by sending it requests such as HTTP requests.
+
+echoping is **no longer** maintained. This repository is for
+historical interest only.
+
+To use it, simply:
+
+```
+% echoping machine.somewhere.org
+```
+
+or use the options before the machine name (see the man page).
+
+See the DETAILS file for various traps when benchmarking networks, specially with this program.
+
+In any case, be polite: don't bother the remote host with many repeated requests, especially with large size. Ask for permission if you often test hosts which aren't yours.
+
+Current features:
+
+    * plugins, so you can extend echoping with any protocol you like and/or use,
+    * Supports IPv6 as well as IPv4,
+    * Supports IDN (Unicode domain names like café.gennic.net),
+    * uses the protocols echo, discard, chargen or HTTP,
+    * can use cryptographic connections with HTTP,
+    * uses UDP instead of TCP for the protocols which accept it (like echo),
+    * can repeat the test and display various measures about it, 
+
+Examples of output:
+
+```
+    (Simple test with 1000 bytes echo TCP packets)
+
+    % echoping -v -s 1000 mycisco
+
+    This is echoping, version 5.0.0.
+
+    Trying to connect to internet address 172.21.0.14 7 to transmit 1000 bytes...
+    Connected...
+    TCP Latency: 0.003165 seconds
+    Sent (1000 bytes)...
+    Application Latency: 0.322183 seconds
+    1000 bytes read from server.
+    Checked
+    Elapsed time: 0.326960 seconds
+
+    (Repeated tests with average / mean and median displayed.)
+
+    % echoping -n 10 faraway-machine
+    [...]
+    Minimum time: 6.722336 seconds (38 bytes per sec.)
+    Maximum time: 17.975060 seconds (14 bytes per sec.)
+    Average time: 10.873267 seconds (24 bytes per sec.)
+    Standard deviation: 3.102793
+    Median  time: 9.218506 seconds (28 bytes per sec.)
+
+    (Testing a Web server with an HTTP request for its home page.)
+
+    %  echoping -h / mywww
+    Elapsed time: 0.686792 seconds
+```
+
+The exit status is set if there is any problem, so you can use echoping to test repeatedly a Web server, to be sure it runs fine (SmokePing does it).

SRC/AUTHORS

@@ -28,6 +28,9 @@ adaptation to the new API, which allows IPv6.
 Luca Deri <deri@ntop.org> for the patch separating kernel (TCP) and
 application latency.
 
+Andy Juniper <ajuniper@freeuk.com> for the patch which excludes
+outliers from averages and from bug fixes on statistical calculations.
+
 SourceForge for the very good environment to work with. SourceForge
 changed the life of many free software programmers!
 

SRC/ChangeLog

@@ -1,15 +1,24 @@
-6.0 (not yet released) 
+6.1 (NOT YET)
 
-	* Plugins: several plugins (TODO: list) are now shipped with
-	echoping and you can write your own. All new protocols will now be
-	supported via plugins. Consequences:
-	   - you now need an Unix with a working dlopen(3)
-	   - echoping now requires the popt parsing library
+	DO NOT FORGET maintenance branch
+	
+6.0.1 (2007-04-04)
+
+	* Bug fixes only
+	
+6.0.0 (2007-03-26)
+
+	* Plugins: several plugins (whois, postgresql, dns) are now
+	shipped with echoping and you can write your own. All new
+	protocols will now be supported via plugins. Consequences:
+	   * you now need an Unix with a working dlopen(3)
+	   * echoping now requires the popt parsing library
 	* popt: echoping now depends on popt. One main change: options
 	parsing is lightly different so some scripts *may* break. A
 	typical example is that "old-school" Unix aggreation of arguments
 	("echoping -v4 localhost") is no longer accepted (use "echoping -v
 	-4 localhost").
+        * Many bug fixes, see the list at Sourceforge
 	
 5.2.0 (2004-02-29)
 

SRC/DETAILS

@@ -3,7 +3,7 @@ Some details about echoping
 
 echoping is a debugging tool. It is not a "end user" tool. For
 instance, HTTP testing takes host names, not URLs as parameters (if
-you want to test in a more HTTPish way, use wget). Also, when
+you want to test in a more HTTPish way, use wget or curl). Also, when
 connecting to a server which has both IPv4 and IPv6 addresses,
 echoping does not try every address in turn like most user-oriented
 programs do. If you want to test only the IPv4 address, use the
@@ -11,13 +11,13 @@ address, not the host name (or use the -4 option).
 
 echo service:
 
-echoping assumes the remote host accepts such connections. Experience
-show that most Internet routers do and many hosts also. However, some
-Unices are not shipped with this service enabled and, anyway, the
-administrator is always free to close it (I think they
-shouldn't). echoping has therefore less chance to succeed than ping or
-bing. (On a typical Unix box, "echo" service is configured in
-/etc/inetd.conf but see the CERT advisory
+echoping by default assumes the remote host accepts such
+connections. Experience show that most Internet routers or hosts could
+do it but do not by default. Most Unices are not shipped with this
+service enabled and, anyway, the administrator is always free to close
+it (I think they shouldn't). echoping has therefore less chance to
+succeed than ping or bing. (On a typical Unix box, "echo" service is
+configured in /etc/inetd.conf but see the CERT advisory
 <http://www.cert.org/advisories/CA-96.01.UDP_service_denial.html>.)
 
 What does it measure?
@@ -29,11 +29,18 @@ physical line raw throughput measures (unlike bing). On the other end,
 the action it performs are close from a HTTP request and it is
 meaningful to use it (carefully) to measure Web performances.
 
+More on Linux:
+
+On operating systems, like Linux, who have the TCP_INFO option (see
+http://linuxgazette.net/136/pfeiffer.html for a detailed
+presentation), echoping can also display interesting TCP information.
+
 UDP and inetd:
 
 With UDP servers you can have surprises: the first test is quite often
-much slower since inetd has to launch the process. After that, the
-process stays a while so the next texts run faster.
+much slower since inetd or xinetd typically has to launch the
+process. After that, the process stays a while so the next texts run
+faster.
 
 A nice example:
 
@@ -49,12 +56,18 @@ To measure performances on the Internet you can also see:
 
 Unix:
 
-- bing, a bandwidth measurement tool <ftp://ftp.lip6.fr/pub/networking>
+- thrulay, measures the capacity of a network by sending a bulk TCP
+  stream over it <http://shlang.com/thrulay/>
+- bing, a bandwidth measurement tool
+  <http://www.freenix.fr/freenix/logiciels/bing.html>
+- patchchar or pchar <http://www.employees.org/~bmah/Software/pchar/>,
+  a bandwidth measurement tool
 - ping, probably available with your system
 - traceroute, idem (otherwise, see <ftp://ftp.ee.lbl.gov/>)
 - ttcp, the best measurement tool but it needs some control over the 
-  two machines <ftp://ftp.arl.mil/pub/ttcp> (nothing to do with
-  the T/TCP protocol)
+  two machines <ftp://ftp.arl.mil/pub/ttcp> 
+- Netpipe, it needs some control over the 
+  two machines <ftp://ftp.scl.ameslab.gov/pub/netpipe/>
 - treno (evaluates available bandwidth for TCP) 
   <http://www.psc.edu/~pscnoc/treno_info.html>
 - spray is a tool which I dont't know very well. It is available on some 
@@ -71,11 +84,12 @@ I've also heard of but never tried:
 Macintosh:
 
 - TCP Watcher, a very nice "swiss-army knife" tool, to test ping, DNS, echo. 
-  It includes an echo server. Available on Info-Mac in "comm/tcp".
+  It includes an echo server. Available on Info-Mac in "comm/inet".
 
 MS-Windows:
 
-(I have little knowledge of that environment and I tested nothing.) 
+(I have little knowledge of that environment and I tested nothing. The
+references here are quite old and should be checked.)
 
 - WSNUTIL. Seems to be an echo client and server. 
   <http://www.ccs.org/winsock/xref-e.html#echo_clients>
@@ -92,18 +106,49 @@ Panel
 
 Web clients:
 
-- You can ping or traceroute on the Web. See 
-  <http://www.freenix.org/cgi-bin/traceroute.iphtml>,
-  <http://www.tracert.com/> or
-  <http://www.fr.net/internet/trace.html>.
-
+- You can ping or traceroute on the Web. See
+  <http://www.traceroute.org/>.
 
 Use all of them with care, the result is not obvious to interpret.
 
+If you are interested in Internet measurements, there is an Internet
+Engineering Task Force Working Group, IPPM (IP Performance Metrics)
+which produces many fine RFC that are really good to read. See
+<http://www.ietf.org/html.charters/ippm-charter.html> for a full
+list. I appreciate RFC 2330 and 3148.
+
 And don't forget to read RFC 1470 ("Tools for Monitoring and Debugging
 TCP/IP Internets and Interconnected Devices"), specially its
 "Benchmark" section and the W. Richard Stevens' books (all of them),
 published by Addison-Wesley.
 
+If you want to modify echoping and test it against slow or lossy
+connections, it is good to be able to reporudce these bad conditions
+at will. To do so, you can use:
+
+On Linux, Netem :
+
+tc qdisc add dev eth0 root netem delay 50ms loss 10%
+tc qdisc add dev eth1 root netem delay 50ms loss 10%
+
+It depends on Netem (network emulation)
+
+ Networking -->
+   Networking Options -->
+     QoS and/or fair queuing -->
+        Network emulator
+
+[If it has been compiled as a module, then do a "modprobe sch_netem".]
+
+On FreeBSD, dummynet (<http://info.iet.unipi.it/~luigi/ip_dummynet>):
+
+ipfw add 1000 pipe 1 tcp from judith to kiwi echo
+ipfw pipe 1 config plr 0.5
+
+It works fine to test echoping with 50 % of loss.
+
+(In French, see
+http://www.bortzmeyer.org/tester-protocoles-reseaux-avec-pertes.html)
+
 
 $Id$

SRC/DEVELOPERS

@@ -0,0 +1,20 @@
+This file stores a few small tips for developers.
+
+=== Starting from a fresh copy ===
+
+When you have just retrieved echoping via Subversion (this does not
+apply to regular tarballs), you must first create all the files
+required by the autotools. You need these autotools (autoconf,
+automake and libtool) and then:
+
+./recreate-autofiles
+
+=== Merging from a maintenance branch back into the trunk ===
+
+If you have fixed bugs in a branch and want to merge them into the
+trunk as well:
+
+cd /where/is/the/trunk
+svn merge -r N:M ../branches/MAINT_X_Y
+
+$Id$

SRC/INSTALL

@@ -25,9 +25,6 @@ may not be available on your platform).
          the GNU TLS library <http://www.gnutls.org/>)
 --with-ssl[=/where/is/ssl] (add the SSL/TLS support, you will need 
          the OpenSSL library <http://www.openssl.org/>)
---disable-ttcp  (suppress the T/TCP support which is enabled only if 
-         your system supports it - FreeBSD does. See 
-         <http://www.kohala.com/start/ttcp.html>)
 --enable-max-iterations=MAX   (limit the number of iterations (-n option for
           repeated tests) to MAX)
 --enable-max-request-size=MAX   (limit the size of the request (-s option) to MAX)
@@ -50,6 +47,24 @@ other choices than using echoping 5. popt can be retrieved from, for
 instance, ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.1.x/popt-1.7.tar.gz or
 ask Freshmeat at http://freshmeat.net/projects/popt/.
 
+If, on a 64bits machine such as one using AMD Opteron, compilation
+stops with something like:
+
+/usr/lib/libpopt.so: could not read symbols: File in wrong format
+
+it could mean that popt was compiled only in 32bits. Recompile popt
+(warning: other applications may use it) or compile and keep two popt
+(practical details on how to keep two versions are welcome) or compile
+echoping in 32bits. With gcc:
+
+CFLAGS=-m32 ./configure --config-cache
+make
+
+If your make program is not in the PATH (for instance, on Solaris, it
+is typically installed in /usr/ccs/bin/make), the simplest trick is:
+
+./configure --config-cache MAKE=/your/path/to/make
+
 Standard "autoconf/configure" options are supported such as --prefix
 to set the installation root directory.
 

SRC/Makefile.am

@@ -5,15 +5,17 @@
 bin_PROGRAMS = echoping
 man_MANS = echoping.1
 echoping_SOURCES = echoping.c error.c readline.c writen.c util.c http.c icp.c HTParse.c echoping.h icp.h HTParse.h smtp.c
+pkginclude_HEADERS = echoping.h compilation.h
 echoping_LDADD = 
 echoping_LDFLAGS = -export-dynamic
 DOCS=DETAILS PLUGINS
 SUBDIRS=plugins
+SVN_REPO=http://echoping.svn.sourceforge.net/svnroot/echoping
 
 TESTS=test-echoping-local test-echoping-remote 
 MORE_TESTS=test-echoping-proxy test-echoping-icp test-echoping-crypto test-echoping-tos test-echoping-ipv6 test-echoping-idn test-echoping-plugins
 
-test: check
+test: tests
 tests: check
 
 # TODO: raise a warning at install-time when the prefix changes (just
@@ -57,12 +59,13 @@ internal_tests: internal_tests.o $(echoping_OBJECTS)
 debug: 
 	$(MAKE) DEBUG=1 CFLAGS='-g -O0'
 
-upload: dist
-	@echo "Have you updated ChangeLog and tagged (cvs tag RELEASE_x_x_x) everything?"
+upload: 
+	@echo "Have you updated configure-common.ac and ChangeLog and committed?"
+	@echo "Then, have you ran \"make distcheck\" and tagged everything?"
+	@echo "[Tag is 'svn copy -m \"TAG Release x.y.z\" ${SVN_REPO}/trunk ${SVN_REPO}/tags/RELEASE_x_y_z']"
 	@echo "If so, make upload-force"
 
 upload-force: dist
-	scp $(distdir).tar.gz  bortzmeyer@ftp.internatif.org:'~ftp/pub/unix/echoping'
 	rm -f upload.log
 	ncftpput -d upload.log upload.sourceforge.net /incoming $(distdir).tar.gz
 
@@ -71,7 +74,7 @@ realclean: distclean
 
 EXTRA_DIST = $(man_MANS) $(TESTS) $(DOCS) $(MORE_TESTS)
 
-## Otherwise, we depend on GNUmake, but for CVS users, not for regular
+## Otherwise, we depend on GNUmake, but for Subversion users, not for regular
 ## tarball users
 ##AUTOMAKE_OPTIONS = no-dependencies
 

SRC/Makefile.in

@@ -1,903 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# $Id$
-
-SOURCES = $(echoping_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-bin_PROGRAMS = echoping$(EXEEXT)
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/compilation.h.in \
-	$(srcdir)/config.h.in $(srcdir)/echoping.1.in \
-	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
-	TODO config.guess config.sub depcomp install-sh ltmain.sh \
-	missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure-common.ac $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = echoping.1 compilation.h
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am_echoping_OBJECTS = echoping.$(OBJEXT) error.$(OBJEXT) \
-	readline.$(OBJEXT) writen.$(OBJEXT) util.$(OBJEXT) \
-	http.$(OBJEXT) icp.$(OBJEXT) HTParse.$(OBJEXT) smtp.$(OBJEXT)
-echoping_OBJECTS = $(am_echoping_OBJECTS)
-echoping_DEPENDENCIES =
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/HTParse.Po ./$(DEPDIR)/echoping.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/error.Po ./$(DEPDIR)/http.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/icp.Po ./$(DEPDIR)/readline.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/smtp.Po ./$(DEPDIR)/util.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/writen.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(echoping_SOURCES)
-DIST_SOURCES = $(echoping_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-compil_date = @compil_date@
-compil_options = @compil_options@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-hostname = @hostname@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-plugins_dir = @plugins_dir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-subdirs = @subdirs@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-man_MANS = echoping.1
-echoping_SOURCES = echoping.c error.c readline.c writen.c util.c http.c icp.c HTParse.c echoping.h icp.h HTParse.h smtp.c
-echoping_LDADD = 
-echoping_LDFLAGS = -export-dynamic
-DOCS = DETAILS PLUGINS
-SUBDIRS = plugins
-TESTS = test-echoping-local test-echoping-remote 
-MORE_TESTS = test-echoping-proxy test-echoping-icp test-echoping-crypto test-echoping-tos test-echoping-ipv6 test-echoping-idn test-echoping-plugins
-EXTRA_DIST = $(man_MANS) $(TESTS) $(DOCS) $(MORE_TESTS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-echoping.1: $(top_builddir)/config.status $(srcdir)/echoping.1.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-compilation.h: $(top_builddir)/config.status $(srcdir)/compilation.h.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-echoping$(EXEEXT): $(echoping_OBJECTS) $(echoping_DEPENDENCIES) 
-	@rm -f echoping$(EXEEXT)
-	$(LINK) $(echoping_LDFLAGS) $(echoping_OBJECTS) $(echoping_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/HTParse.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/echoping.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/icp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readline.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smtp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/writen.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
-	srcdir=$(srcdir); export srcdir; \
-	list='$(TESTS)'; \
-	if test -n "$$list"; then \
-	  for tst in $$list; do \
-	    if test -f ./$$tst; then dir=./; \
-	    elif test -f $$tst; then dir=; \
-	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *" $$tst "*) \
-		xpass=`expr $$xpass + 1`; \
-		failed=`expr $$failed + 1`; \
-		echo "XPASS: $$tst"; \
-	      ;; \
-	      *) \
-		echo "PASS: $$tst"; \
-	      ;; \
-	      esac; \
-	    elif test $$? -ne 77; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *" $$tst "*) \
-		xfail=`expr $$xfail + 1`; \
-		echo "XFAIL: $$tst"; \
-	      ;; \
-	      *) \
-		failed=`expr $$failed + 1`; \
-		echo "FAIL: $$tst"; \
-	      ;; \
-	      esac; \
-	    else \
-	      skip=`expr $$skip + 1`; \
-	      echo "SKIP: $$tst"; \
-	    fi; \
-	  done; \
-	  if test "$$failed" -eq 0; then \
-	    if test "$$xfail" -eq 0; then \
-	      banner="All $$all tests passed"; \
-	    else \
-	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
-	    fi; \
-	  else \
-	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all tests failed"; \
-	    else \
-	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
-	    fi; \
-	  fi; \
-	  dashes="$$banner"; \
-	  skipped=""; \
-	  if test "$$skip" -ne 0; then \
-	    skipped="($$skip tests were not run)"; \
-	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$skipped"; \
-	  fi; \
-	  report=""; \
-	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
-	    report="Please report to $(PACKAGE_BUGREPORT)"; \
-	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$report"; \
-	  fi; \
-	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  echo "$$dashes"; \
-	  echo "$$banner"; \
-	  test -z "$$skipped" || echo "$$skipped"; \
-	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes"; \
-	  test "$$failed" -eq 0; \
-	else :; fi
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || mkdir "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="../$(top_distdir)" \
-	        distdir="../$(distdir)/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-recursive
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man
-
-uninstall-info: uninstall-info-recursive
-
-uninstall-man: uninstall-man1
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-TESTS check-am clean clean-binPROGRAMS clean-generic \
-	clean-libtool clean-recursive ctags ctags-recursive dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-recursive \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-binPROGRAMS install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-man1 install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-info-am uninstall-man \
-	uninstall-man1
-
-
-test: check
-tests: check
-
-# TODO: raise a warning at install-time when the prefix changes (just
-# a warning because we do not want to prevent Debian packages for
-# being built), otherwise, the plugins will not be found.
-
-fulltest: test moretest
-
-moretests: moretest
-moretest: $(MORE_TESTS)
-	@failed=0; all=0; \
-	srcdir=$(srcdir); export srcdir; \
-	for tst in $(MORE_TESTS); do \
-	  if test -f $$tst; then dir=.; \
-	  else dir="$(srcdir)"; fi; \
-	  if $(TESTS_ENVIRONMENT) $$dir/$$tst; then \
-	    all=`expr $$all + 1`; \
-	    echo "PASS: $$tst"; \
-	  elif test $$? -ne 77; then \
-	    all=`expr $$all + 1`; \
-	    failed=`expr $$failed + 1`; \
-	    echo "FAIL: $$tst"; \
-	  fi; \
-	done; \
-	if test "$$failed" -eq 0; then \
-	  banner="All $$all tests passed"; \
-	else \
-	  banner="$$failed of $$all tests failed"; \
-	fi; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"; \
-	test "$$failed" -eq 0
-
-internal_test: internal_tests
-internal_tests: internal_tests.o $(echoping_OBJECTS)
-	$(CC) $(LDFLAGS) -o $@ $< util.o 
-	./internal_tests
-
-debug: 
-	$(MAKE) DEBUG=1 CFLAGS='-g -O0'
-
-upload: dist
-	@echo "Have you updated ChangeLog and tagged (cvs tag RELEASE_x_x_x) everything?"
-	@echo "If so, make upload-force"
-
-upload-force: dist
-	scp $(distdir).tar.gz  bortzmeyer@ftp.internatif.org:'~ftp/pub/unix/echoping'
-	rm -f upload.log
-	ncftpput -d upload.log upload.sourceforge.net /incoming $(distdir).tar.gz
-
-realclean: distclean
-	rm -rf *~ autom4te.cache
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/PLUGINS

@@ -6,11 +6,15 @@ echoping a struct addrinfo. All the DNS stuff, including IDN, is
 performed by echoping. You can immediately start using the struct
 addrinfo.
 
-But some libraries (typically, the one used by the DBMS) do not work
+But some libraries (typically, the one used by the DBMSs) do not work
 on struct addrinfo but on strings such as "dbname=test
 hostname=foo.bar". Plugins using these libraries will have to use the
 raw interface. The host name given as argument is ignored.
 
+[Do note there is *no* interface where the TCP connection and shutdown
+are done by echoping. (See bug #1694510) They are always performed by
+the plugin.]
+
 You indicate to echoping wether you use the raw interface or the
 cooked one by returning a port name or NULL from the init() function.
 
@@ -45,7 +49,7 @@ void terminate ()
 Start your plugin source code with:
 
 #define IN_PLUGIN
-#include "/wherever/echoping/is/installed/echoping.h"
+#include <echoping/echoping.h>
 
 You can look at random.c, the simplest plugin, and whois.c, the
 simplest which still does something useful.

SRC/README

@@ -27,7 +27,6 @@ Current features:
 - supports IPv6 as well as IPv4,
 - supports IDN (Unicode domain names),
 - supports plugins written by you, to test even more protocols (see PLUGINS),
-- can use T/TCP on systems which support it.
 
 Examples of output:
 
@@ -65,7 +64,7 @@ http://echoping.sourceforge.net/
 
 The distribution is from:
 
-ftp://ftp.internatif.org/pub/unix/echoping
+http://sourceforge.net/project/showfiles.php?group_id=4581
 
 Stephane Bortzmeyer <bortz@users.sourceforge.net>. October 1995 for the
 first version. 
@@ -82,7 +81,7 @@ can (but are not forced to do so, echoping is free software):
 
 * Send me a postcard. I love postcards:
        Stephane Bortzmeyer
-       12, rue Chauvelot
+       127, rue Brancion
        75015 Paris
        France
 

SRC/TODO

@@ -1,10 +1,10 @@
 Actual bugs are registered at SourceForge:
 
-http://sourceforge.net/bugs/?group_id=4581
+http://sourceforge.net/tracker/?group_id=4581&atid=104581
 
 To see a given bug (say #132001):
 
-http://sourceforge.net/bugs/?group_id=4581&func=detailbug&bug_id=132001
+http://sourceforge.net/tracker/index.php?func=detail&aid=132001&group_id=4581&atid=104581
 
 -------------------------------------
 
@@ -16,67 +16,10 @@ is interesting, too.
 
 Wishes:
 
-Display other calculations such as kurtosis.
+See them at Sourceforge :
 
-Check the TCP timeout with T/TCP. Difficult to test, few T/TCP
-machines exist. Timeouts on T/TCP connections are a bit experimental.
+http://sourceforge.net/tracker/?group_id=4581&atid=354581
 
-TCP timeout with long packets seem to confuse Cisco routers. Does
-someone can reproduce it and perform tests? It seems to work now.
-
-Do not display the end-of-line after the HTTP reply, for instance when
-a page is moved.
-
-UDP isn't really useable with large packets because of sockets
-limitations and the lack of workaround code.
-
-If a Web page is empty, echoping will display meaningless messages.
-
-Since echoping writes everything to the server, then begins to read
-the reply, some echo servers will timeout if you send very long
-messages, because they expect you to start to read right now.
-
-Make FLUSH a configure-able option. It would be useful for driving
-echoping from a GUI application, for instance. Code does exist but
-untested and probably broken.
-
---------------------------------- 
-
-New protocols (all with a configure option to enable/disable them
-since most of them would require an external library)
-
-* DNS (dig performs some of the functions of echoping but not all: it
-  does not set the return code, it cannot repeat a query, etc)
-
-* whois
-
-* LDAP
-
-* PostgreSQL 
-
-
----------------------------------
-
-Long-term wishes (will need much more work):
-
-Following a suggestion from Tobias Oetiker : the remaining thing is
-parallel operation ... analog to fping, this would be great as it
-would increasse the performance of eechoping greatly ... This would
-require changing echoping and creating a loop around select().
-
-Adding support for a new protocol (say, DNS, with BIND's library),
-requires changing too many things. echoping needs a plug-in API, so we
-can write the new cde outside of echoping and dlopen() it.
-
-------------------------------------
-
-Compiler's warnings:
-
-Tru64's cc:
-cc -DHAVE_CONFIG_H -I. -I. -I.   -D_POSIX_PII_SOCKET  -g -c icp.c
-cc: Warning: icp.c, line 92: In this statement, the referenced type of the pointer value "(int ...)0" is "int", which is not compatible with "unsigned long". (ptrmismatch)
-  nr = recvfrom (sockfd, buf, DEFLINE, 0, (struct sockaddr *) 0, (int *) 0);
------------------------------------------------------------------^
 
 
 $Id$

SRC/acinclude.m4

@@ -214,7 +214,7 @@ ac_last_port=
 
 dnl Our (W. Richard Stevens') macro to check for a function prototype in 
 dnl a given header.  
-AC_DEFUN(AC_CHECK_FUNC_PROTO,
+AC_DEFUN([AC_CHECK_FUNC_PROTO],
         [AC_CACHE_CHECK(for $1 function prototype in $2, ac_cv_have_$1_proto,
                 AC_EGREP_HEADER($1, $2,
                         ac_cv_have_$1_proto=yes,
@@ -228,7 +228,7 @@ AC_DEFUN(AC_CHECK_FUNC_PROTO,
 dnl BROKEN: do not use
 dnl Copied from autoconf and edited to add an argument: an include file
 dnl AC_CHECK_FUNC_WITH_HEADER(FUNCTION, HEADER, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-AC_DEFUN(AC_CHECK_FUNC_WITH_HEADER,
+AC_DEFUN([AC_CHECK_FUNC_WITH_HEADER],
 [AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(ac_cv_func_$1,
 [AC_TRY_LINK(

SRC/compilation.h.in

@@ -1,3 +1,3 @@
-#define COMPILATION_OPTIONS "@PACKAGE_NAME@ @PACKAGE_VERSION@ compiled with @CC@ on @hostname@ (@host@)\n at @compil_date@ with options:\n@compil_options@\n\nPlugins are searched in @plugins_dir@."
+#define COMPILATION_OPTIONS "@PACKAGE_NAME@ @PACKAGE_VERSION@ compiled with @CC@ on @hostname@ (@host@)\n at @compil_date@ with options:\nCFLAGS= @CFLAGS@\nLDFLAGS= @LDFLAGS@\n@compil_options@\n\nPlugins are searched in @plugins_dir@."
 
 /* $Id$ */

SRC/config.h.in

@@ -1,145 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Crypto (TLS) support */
-#undef GNUTLS
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the `dlopen' function. */
-#undef HAVE_DLOPEN
-
-/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
-#undef HAVE_DOPRNT
-
-/* Define to 1 if you have the `getaddrinfo' function. */
-#undef HAVE_GETADDRINFO
-
-/* Define to 1 if you have the `getnameinfo' function. */
-#undef HAVE_GETNAMEINFO
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define to 1 if you have the `inet_ntop' function. */
-#undef HAVE_INET_NTOP
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `dl' library (-ldl). */
-#undef HAVE_LIBDL
-
-/* Define to 1 if you have the `popt' library (-lpopt). */
-#undef HAVE_LIBPOPT
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `poptGetContext' function. */
-#undef HAVE_POPTGETCONTEXT
-
-/* Define to 1 if you have the `sigaction' function. */
-#undef HAVE_SIGACTION
-
-/* Define to 1 if you have the `socket' function. */
-#undef HAVE_SOCKET
-
-/* Socket priority support */
-#undef HAVE_SOCKET_PRIORITY
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Type Of Service support */
-#undef HAVE_TOS
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `usleep' function. */
-#undef HAVE_USLEEP
-
-/* Define to 1 if you have the `vprintf' function. */
-#undef HAVE_VPRINTF
-
-/* HTTP support */
-#undef HTTP
-
-/* ICP support */
-#undef ICP
-
-/* Internationalized Domain Names support */
-#undef LIBIDN
-
-/* Maximum number of iterations */
-#undef MAX_ITERATIONS
-
-/* Maximum size of a request */
-#undef MAX_LINE
-
-/* Crypto (SSL) support */
-#undef OPENSSL
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Directory where the plugins will be installed */
-#undef PLUGINS_DIR
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* SMTP support */
-#undef SMTP
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Transaction TCP support */
-#undef TTCP
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const

SRC/configure-common.ac

@@ -1,5 +1,5 @@
 dnl $Id$
-AC_INIT(echoping, 6.0-BETA)
+AC_INIT(echoping, 6.1-BETA, bortz@users.sourceforge.net)
 AC_CANONICAL_HOST
 AC_PROG_CC(cc gcc)
 AC_LIBTOOL_DLOPEN

SRC/configure.ac

@@ -6,6 +6,10 @@ m4_include(configure-common.ac)
 AM_INIT_AUTOMAKE
 AM_CONFIG_HEADER(config.h)
 
+dnl Checking size of ints, we often need it for binary protocols like ICP
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+
 dnl User options
 dnl http://sources.redhat.com/ml/automake-prs/2001-q3/msg00033.html
 max_iterations_specified=0
@@ -88,14 +92,21 @@ AC_ARG_WITH(ssl,
 AC_ARG_WITH(gnutls,
  [  --with-gnutls[=DIR]   SSL/TLS crypt support (needs GNU TLS), the argument DIR should not be necessary],dnl
  [if test "$withval" != "no"; then
-   AC_DEFINE(GNUTLS,,[Crypto (TLS) support])
-   GNUTLS=1
-   CPPFLAGS="${CPPFLAGS} `libgnutls-config --cflags`"
-   LDFLAGS="${LDFLAGS} `libgnutls-config --libs`"
-   if test "$withval" != "yes"; then
-	GNUTLSROOT=$withval
-	LDFLAGS="${LDFLAGS} -L$GNUTLSROOT/lib"
-        CPPFLAGS="${CPPFLAGS} -I$GNUTLSROOT/include"  
+  if test "$withval" = "yes"; then
+      PKG_CHECK_MODULES([LIBGNUTLS], [gnutls >= 1.0.0],
+      [
+      echo "GnuTLS found"
+      AC_DEFINE(GNUTLS,,[Crypto (TLS) support])
+      GNUTLS=1
+      CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
+      LIBS="$LIBS $LIBGNUTLS_LIBS"
+      ],)
+      else
+      AC_DEFINE(GNUTLS,,[Crypto (TLS) support])
+      GNUTLS=1
+      GNUTLSROOT=$withval
+      LDFLAGS="${LDFLAGS} -L$GNUTLSROOT/lib -lgnutls"
+      CPPFLAGS="${CPPFLAGS} -I$GNUTLSROOT/include"
    fi
  fi],
  dnl Default: disable it 
@@ -119,7 +130,6 @@ AC_ARG_WITH(popt,
  fi],
  dnl Default: disable it
 )
-dnl See T/TCP later 
 
 dnl Checks for programs.
 AC_PROG_CC
@@ -188,31 +198,32 @@ if test "$GNUTLS" = "1"; then
 CF_LIB_GNUTLS
 fi
 
-dnl T/TCP
-AC_MSG_CHECKING([T/TCP])
+AC_MSG_CHECKING([TCP info from socket])
 AC_TRY_COMPILE(
  [#include <sys/types.h>
   #include <sys/socket.h>
+  /* TODO: including tcp.h may not be necessary */
+  #include <netinet/tcp.h>
  ],
- [int foobar = MSG_EOF;],
- [AC_DEFINE(TTCP,,[Transaction TCP support])
-  ac_have_ttcp="yes"],
- ac_have_ttcp=no)
-AC_MSG_RESULT($ac_have_ttcp)
-AC_ARG_ENABLE(ttcp,
- [  --enable-ttcp   T/TCP (Transaction TCP) support],
+ [int foobar = SOL_TCP;],
+ [AC_DEFINE(HAVE_TCP_INFO,,[TCP info from socket])
+  ac_have_tcp_info="yes"],
+ ac_have_tcp_info=no)
+AC_MSG_RESULT($ac_have_tcp_info)
+AC_ARG_ENABLE(tcp_info,
+ [  --enable-tcp-info   TCP info from socket],
  [if test "$enableval" = "yes"; then
-   if test $ac_have_ttcp = "yes"; then
-     AC_DEFINE(TTCP,,[Transaction TCP support])
-     TTCP=1
+   if test $ac_have_tcp_info = "yes"; then
+     AC_DEFINE(HAVE_TCP_INFO,,[TCP info from socket])
+     TCP_INFO=1
    else
-     AC_MSG_WARN([No T/TCP support on this system, request ignored])
+     AC_MSG_WARN([No TCP info support on this system, request ignored])
    fi
   fi],
  dnl Default: enable it if supported
- if test $ac_have_ttcp = "yes"; then
-   AC_DEFINE(TTCP,,[Transaction TCP support])
-   TTCP=1
+ if test $ac_have_tcp_info = "yes"; then
+   AC_DEFINE(HAVE_TCP_INFO,,[TCP info])
+   TCP_INFO=1
  fi)
 
 dnl Type Of Service
@@ -270,6 +281,33 @@ AC_ARG_ENABLE(priority,
    PRIORITY=1
  fi)
 
+dnl SCTP, RFC 4960, feature request #1676608
+AC_MSG_CHECKING([SCTP])
+AC_TRY_COMPILE(
+ [#include <sys/types.h>
+  #include <netinet/in.h>
+ ],
+ [int foobar = IPPROTO_SCTP;],
+ [AC_DEFINE(HAVE_SCTP,,[SCTP support])
+  ac_have_sctp="yes"],
+ ac_have_sctp="no")
+AC_MSG_RESULT($ac_have_sctp)
+AC_ARG_ENABLE(sctp,
+ [  --enable-sctp   SCTP (Stream Control Transmission Protocol) support],
+ [if test "$enableval" = "yes"; then
+   if test $ac_have_sctp = "yes"; then
+     AC_DEFINE(HAVE_SCTP,,[Stream Control Transmission Protocol support])
+     SCTP=1
+   else
+     AC_MSG_WARN([No SCTP support on this system, request ignored])
+   fi
+  fi],
+ dnl Default: enable it if supported
+ if test $ac_have_sctp = "yes"; then
+   AC_DEFINE(HAVE_SCTP,,[Stream Control Transmission Protocol support])
+   SCTP=1
+ fi)
+
 if test "$GCC" = yes; then
         CFLAGS="$CFLAGS -Wall"
 fi
@@ -301,6 +339,7 @@ else
 fi
 AC_DEFINE_UNQUOTED(PLUGINS_DIR, "$plugins_dir", [Directory where the plugins will be installed])
 AC_SUBST(plugins_dir)
+# TODO: make distcheck complains here that "plugins" does not exist???
 echo $plugins_dir > plugins/dir
 AC_CONFIG_SUBDIRS(plugins)
 
@@ -326,8 +365,8 @@ DISPLAY_SETTING(OPENSSL)
 DISPLAY_SETTING(GNUTLS)
 DISPLAY_SETTING(SMTP)
 DISPLAY_SETTING(LIBIDN)
-DISPLAY_SETTING(TTCP)
 DISPLAY_SETTING(TOS)
+DISPLAY_SETTING(SCTP)
 DISPLAY_SETTING(PRIORITY)
 
 compil_date=`date +%Y-%m-%d`

SRC/contrib/adamsnames/configure.ac

@@ -10,6 +10,8 @@ AC_CHECK_PROG(ADAMSNAMES_BUILD, xmlrpc-c-config, 1, 0)
 if test "$ADAMSNAMES_BUILD" = 1; then
    LIBS="${LIBS} `xmlrpc-c-config libwww-client --libs`"
    CCFLAGS="${CCFLAGS} `xmlrpc-c-config libwww-client --cflags`"
+else
+   AC_ERROR([No XML-RPC C developement environment found, get it from http://xmlrpc-c.sourceforge.net/])
 fi
 AM_CONDITIONAL(ADAMSNAMESBUILD, test "$ADAMSNAMES_BUILD" = 1)
 AC_OUTPUT(Makefile)

SRC/contrib/adamsnames/domquery.c

@@ -19,96 +19,93 @@
 #include "common.h"
 
 void
-domquery_usage (char *msg)
+domquery_usage(char *msg)
 {
-  fprintf (stderr, "%s\n", msg);
-  poptPrintUsage (poptcon, stderr, 0);
-  err_quit("   domain");
+    fprintf(stderr, "%s\n", msg);
+    poptPrintUsage(poptcon, stderr, 0);
+    err_quit("   domain");
 }
 
-char *
-init (int argc, char **argv)
+char           *
+init(int argc, char **argv)
 {
-  int value;
-  xmlrpc_value *result;
-  xmlrpc_bool free, read_contacts;
-  xmlrpc_int32 reason;
-  char *msg, *hostname;
-
-  struct poptOption options[] = {
-    {"read-contacts", 'c', POPT_ARG_NONE, &read_contacts, 0,
-     "Read also the contacts of the domain [NOT IMPLEMENTED]",
-     ""},
-    POPT_AUTOHELP POPT_TABLEEND
-  };
-  poptcon = poptGetContext (NULL, argc,
-                                argv, options, POPT_CONTEXT_KEEP_FIRST);
-  while ((value = poptGetNextOpt (poptcon)) > 0)
-    {
-      if (value < -1)
-        {
-          sprintf (msg, "%s: %s",
-                   poptBadOption (poptcon, POPT_BADOPTION_NOALIAS),
-                   poptStrerror (value));
-          domquery_usage (msg);
+    int             value;
+    xmlrpc_value   *result;
+    xmlrpc_bool     free, read_contacts;
+    xmlrpc_int32    reason;
+    char           *msg, *hostname;
+
+    struct poptOption options[] = {
+        {"read-contacts", 'c', POPT_ARG_NONE, &read_contacts, 0,
+         "Read also the contacts of the domain [NOT IMPLEMENTED]",
+         ""},
+        POPT_AUTOHELP POPT_TABLEEND
+    };
+    poptcon = poptGetContext(NULL, argc, argv, options, POPT_CONTEXT_KEEP_FIRST);
+    while ((value = poptGetNextOpt(poptcon)) > 0) {
+        if (value < -1) {
+            sprintf(msg, "%s: %s",
+                    poptBadOption(poptcon, POPT_BADOPTION_NOALIAS),
+                    poptStrerror(value));
+            domquery_usage(msg);
         }
     }
-  hostname = (char *) poptGetArg (poptcon); /* Not used */
-  domain = (char *) poptGetArg (poptcon);
-  if (domain == NULL || !strcmp(domain, ""))
-    domquery_usage ("Mandatory request missing");
+    hostname = (char *) poptGetArg(poptcon);    /* Not used */
+    domain = (char *) poptGetArg(poptcon);
+    if (domain == NULL || !strcmp(domain, ""))
+        domquery_usage("Mandatory request missing");
 
-  return NULL;
+    return NULL;
 }
 
 void
-start_raw() {
+start_raw()
+{
 
-  /* Start up our XML-RPC client library. */
-  xmlrpc_client_init (XMLRPC_CLIENT_NO_FLAGS, CLIENT_NAME, CLIENT_VERSION);
+    /* Start up our XML-RPC client library. */
+    xmlrpc_client_init(XMLRPC_CLIENT_NO_FLAGS, CLIENT_NAME, CLIENT_VERSION);
 
-  /* Initialize our error-handling environment. */
-  xmlrpc_env_init (&env);
+    /* Initialize our error-handling environment. */
+    xmlrpc_env_init(&env);
 
-      printf ("env initialized\n");
+    printf("env initialized\n");
 
 }
 
 int
-execute ()
+execute()
 {
-  xmlrpc_value *result;
-  xmlrpc_value *domain_h;
-  xmlrpc_int32 found;
-  xmlrpc_value *error;
-  /*  char *dst;
-      dst = HTAnchor_findAddress(ENDPOINT); */
-      printf ("Ready to call\n");
-  /* Call the server */
-  result = xmlrpc_client_call (&env, ENDPOINT, "domquery", "(s)", domain);
-  die_if_fault_occurred (&env);
-      printf ("Call done, now parsing\n");
-
-  xmlrpc_parse_value (&env, result, "{s:i,*}", "found", &found);
-  die_if_fault_occurred (&env);
-  if (found)
-    {
-      printf ("%s is there\n", domain);
-  xmlrpc_parse_value (&env, result, "{s:S,i,s:A,*}", "domain", &domain_h, "found", &found, "error", &error);
-  die_if_fault_occurred (&env);
+    xmlrpc_value   *result;
+    xmlrpc_value   *domain_h;
+    xmlrpc_int32    found;
+    xmlrpc_value   *error;
+    /* char *dst; dst = HTAnchor_findAddress(ENDPOINT); */
+    printf("Ready to call\n");
+    /* Call the server */
+    result = xmlrpc_client_call(&env, ENDPOINT, "domquery", "(s)", domain);
+    die_if_fault_occurred(&env);
+    printf("Call done, now parsing\n");
+
+    xmlrpc_parse_value(&env, result, "{s:i,*}", "found", &found);
+    die_if_fault_occurred(&env);
+    if (found) {
+        printf("%s is there\n", domain);
+        xmlrpc_parse_value(&env, result, "{s:S,i,s:A,*}", "domain",
+                           &domain_h, "found", &found, "error", &error);
+        die_if_fault_occurred(&env);
     }
-  /* Dispose of our result value. */
-  xmlrpc_DECREF (result);
-  return 0;
+    /* Dispose of our result value. */
+    xmlrpc_DECREF(result);
+    return 0;
 }
 
 void
-terminate ()
+terminate()
 {
-			  /* Clean up our error-handling environment. */
-			  xmlrpc_env_clean (&env);
+    /* Clean up our error-handling environment. */
+    xmlrpc_env_clean(&env);
 
-			  /* Shutdown our XML-RPC client library. */
-			  xmlrpc_client_cleanup ();
+    /* Shutdown our XML-RPC client library. */
+    xmlrpc_client_cleanup();
 
-			  }
+}

SRC/contrib/adamsnames/test-domquery.c

@@ -14,72 +14,67 @@
 #define ENDPOINT "http://www.adamsnames.tc/api/xmlrpc"
 
 void
-die_if_fault_occurred (xmlrpc_env * env)
+die_if_fault_occurred(xmlrpc_env * env)
 {
-  if (env->fault_occurred)
-    {
-      fprintf (stderr, "XML-RPC Fault: %s (%d)\n",
-	       env->fault_string, env->fault_code);
-      exit (1);
+    if (env->fault_occurred) {
+        fprintf(stderr, "XML-RPC Fault: %s (%d)\n",
+                env->fault_string, env->fault_code);
+        exit(1);
     }
 }
 
 int
-main (int argc, char **argv)
+main(int argc, char **argv)
 {
-  int value;
-  xmlrpc_value *result;
-  xmlrpc_bool free, read_contacts;
-  xmlrpc_int32 reason;
-  xmlrpc_value *domain_h;
-  xmlrpc_int32 found;
-  xmlrpc_value *error;
-  xmlrpc_env env;
-  char *domain;
-  char *date, *holder;
+    int             value;
+    xmlrpc_value   *result;
+    xmlrpc_bool     free, read_contacts;
+    xmlrpc_int32    reason;
+    xmlrpc_value   *domain_h;
+    xmlrpc_int32    found;
+    xmlrpc_value   *error;
+    xmlrpc_env      env;
+    char           *domain;
+    char           *date, *holder;
 
-  if (argc != 2)
-    {
-      fprintf (stderr, "Usage: %s domain\n", argv[0]);
-      exit (1);
+    if (argc != 2) {
+        fprintf(stderr, "Usage: %s domain\n", argv[0]);
+        exit(1);
     }
 
-  domain = argv[1];
+    domain = argv[1];
 
-  /* Start up our XML-RPC client library. */
-  xmlrpc_client_init (XMLRPC_CLIENT_NO_FLAGS, CLIENT_NAME, CLIENT_VERSION);
+    /* Start up our XML-RPC client library. */
+    xmlrpc_client_init(XMLRPC_CLIENT_NO_FLAGS, CLIENT_NAME, CLIENT_VERSION);
 
-  /* Initialize our error-handling environment. */
-  xmlrpc_env_init (&env);
+    /* Initialize our error-handling environment. */
+    xmlrpc_env_init(&env);
 
-  /* Call the server */
-  result = xmlrpc_client_call (&env, ENDPOINT, "domquery", "(s)", domain);
-  die_if_fault_occurred (&env);
+    /* Call the server */
+    result = xmlrpc_client_call(&env, ENDPOINT, "domquery", "(s)", domain);
+    die_if_fault_occurred(&env);
 
-  xmlrpc_parse_value (&env, result, "{s:i,*}", "found", &found);
-  die_if_fault_occurred (&env);
-  if (found)
-    {
-      printf ("%s is there\n", domain);
-      xmlrpc_parse_value (&env, result, "{s:S,s:i,s:A,*}", "domain",
-			  &domain_h, "found", &found, "error", &error);
-      die_if_fault_occurred (&env);
-      /*  printf ("Type of domain: %d\n", xmlrpc_value_type(domain_h)); */
-      xmlrpc_parse_value (&env, domain_h, "{s:s,s:s,*}", "registered", &date,
-			  "org", &holder);
-      die_if_fault_occurred (&env);
-      printf ("Registered on %s by %s\n", date, holder);
+    xmlrpc_parse_value(&env, result, "{s:i,*}", "found", &found);
+    die_if_fault_occurred(&env);
+    if (found) {
+        printf("%s is there\n", domain);
+        xmlrpc_parse_value(&env, result, "{s:S,s:i,s:A,*}", "domain",
+                           &domain_h, "found", &found, "error", &error);
+        die_if_fault_occurred(&env);
+        /* printf ("Type of domain: %d\n", xmlrpc_value_type(domain_h)); */
+        xmlrpc_parse_value(&env, domain_h, "{s:s,s:s,*}", "registered",
+                           &date, "org", &holder);
+        die_if_fault_occurred(&env);
+        printf("Registered on %s by %s\n", date, holder);
+    } else {
+        printf("Unknown domain %s\n", domain);
     }
-  else
-    {
-      printf ("Unknown domain %s\n", domain);
-    }
-  /* Dispose of our result value. */
-  xmlrpc_DECREF (result);
-  /* Clean up our error-handling environment. */
-  xmlrpc_env_clean (&env);
+    /* Dispose of our result value. */
+    xmlrpc_DECREF(result);
+    /* Clean up our error-handling environment. */
+    xmlrpc_env_clean(&env);
 
-  /* Shutdown our XML-RPC client library. */
-  xmlrpc_client_cleanup ();
+    /* Shutdown our XML-RPC client library. */
+    xmlrpc_client_cleanup();
 
 }

SRC/contrib/adamsnames/util.c

@@ -4,12 +4,9 @@
 #include <xmlrpc_client.h>
 
 void
-die_if_fault_occurred (xmlrpc_env * env)
+die_if_fault_occurred(xmlrpc_env * env)
 {
-  if (env->fault_occurred)
-    {
-      err_quit("XML-RPC Fault: %s (%d)\n",
-               env->fault_string, env->fault_code);
+    if (env->fault_occurred) {
+        err_quit("XML-RPC Fault: %s (%d)\n", env->fault_string, env->fault_code);
     }
 }
-

SRC/contrib/daytime/Makefile

@@ -1,4 +1,4 @@
-CCFLAGS=-Wall -O0 -g -fPIC
+XCFLAGS=-Wall -O0 -g -fPIC ${CFLAGS}
 LDFLAGS=-shared
 
 OBJECTS=daytime.o
@@ -6,7 +6,7 @@ OBJECTS=daytime.o
 all: daytime.so
 
 %.o: %.c
-	${CC} ${CCFLAGS} -c -o $@ $<
+	${CC} ${XCFLAGS} -c -o $@ $<
 
 %.so: %.o
 	${CC} ${LDFLAGS} -o $@ $<

SRC/contrib/daytime/daytime.c

@@ -5,50 +5,50 @@
  */
 
 #define IN_PLUGIN
-#include "../../echoping.h"
+#include <echoping/echoping.h>
 
 struct addrinfo daytime_server;
-int sockfd;
+int             sockfd;
 echoping_options options;
 
-char *
-init (const int argc, const char **argv, echoping_options global_options)
+char           *
+init(const int argc, const char **argv, echoping_options global_options)
 {
-  if (global_options.udp)
-    err_quit ("Sorry, UDP is not yet compatible with this daytime plugin");
-  options = global_options;
-  return "daytime";
+    if (global_options.udp)
+        err_quit("Sorry, UDP is not yet compatible with this daytime plugin");
+    options = global_options;
+    return "daytime";
 }
 
 void
-start (struct addrinfo *res)
+start(struct addrinfo *res)
 {
-  daytime_server = *res;
+    daytime_server = *res;
 }
 
 int
-execute ()
+execute()
 {
-  int nr;
-  FILE *file;
+    int             nr;
+    FILE           *file;
 #define MAX 256
-  char recvline[MAX];
-  if ((sockfd =
-       socket (daytime_server.ai_family, daytime_server.ai_socktype,
-	       daytime_server.ai_protocol)) < 0)
-    err_sys ("Can't open socket");
-  if (connect (sockfd, daytime_server.ai_addr, daytime_server.ai_addrlen) < 0)
-    err_sys ("Can't connect to server");
-  if ((file = fdopen (sockfd, "r")) == NULL)
-    err_sys ("Cannot fdopen");
-  nr = readline (file, recvline, MAX, 1);
-  if (options.verbose)
-    printf ("%s", recvline);
-  close (sockfd);
-  return 1;
+    char            recvline[MAX];
+    if ((sockfd =
+         socket(daytime_server.ai_family, daytime_server.ai_socktype,
+                daytime_server.ai_protocol)) < 0)
+        err_sys("Can't open socket");
+    if (connect(sockfd, daytime_server.ai_addr, daytime_server.ai_addrlen) < 0)
+        err_sys("Can't connect to server");
+    if ((file = fdopen(sockfd, "r")) == NULL)
+        err_sys("Cannot fdopen");
+    nr = readline(file, recvline, MAX, 1);
+    if (options.verbose)
+        printf("%s", recvline);
+    close(sockfd);
+    return 1;
 }
 
 void
-terminate ()
+terminate()
 {
 }

SRC/contrib/lose-packets

@@ -0,0 +1,58 @@
+#!/bin/sh
+
+# Dangerous. Use only if you know what you do.
+
+# Linux-only
+
+# Configure the Linux traffic control to lose packets, in order to test
+# echoping.
+
+# http://linux-net.osdl.org/index.php/Netem
+
+DEVICE="tap0"
+PROTOCOL="udp"
+DEST_PORTS="7 53"
+# In percent
+LOSS=20
+# In milli-seconds
+DELAY=40
+CLEAN_FIRST="YES"
+USE_IPTABLES="YES"
+
+# Do not touch afterwards
+INTERESTING="4"
+PLAIN="0"
+
+if [ ! -z "$CLEAN_FIRST" ]; then
+   tc qdisc del dev ${DEVICE} root
+   iptables -t mangle -F INPUT
+   iptables -t mangle -F OUTPUT
+fi
+
+tc qdisc add dev ${DEVICE} root handle 1: prio
+
+tc qdisc add dev ${DEVICE} parent 1:2 handle ${INTERESTING}: \
+    netem delay ${DELAY}ms loss ${LOSS}% 
+
+#tc qdisc add dev ${DEVICE} parent ${INTERESTING}:1 \
+#    tbf rate 20kbit buffer 1600 limit 3000
+
+if [ -z "$USE_IPTABLES" ] || [ "$USE_IPTABLES" = "NO" ]; then
+    for port in ${DEST_PORTS}; do
+	# Note: $PROTOCOL is ignored...
+	tc filter add dev ${DEVICE} protocol ip parent 1:0 prio 2 u32 \
+	    match ip dport ${port} 0xffff flowid 10:5
+    done
+else
+    tc filter add dev ${DEVICE} protocol ip parent 1:0 prio 2 \
+	handle ${INTERESTING} fw flowid 10:5
+    # Not perfect: it seems all ports are affected :-(
+    for port in ${DEST_PORTS}; do
+	# Ingress
+	iptables -t mangle -A INPUT -i ${DEVICE} -p ${PROTOCOL} --sport ${port} \
+	    -j MARK --set-mark ${INTERESTING}
+        # Egress
+	iptables -t mangle -A OUTPUT -o ${DEVICE} -p ${PROTOCOL} --dport ${port} \
+	    -j MARK --set-mark ${INTERESTING}
+    done
+fi

SRC/contrib/small-services/Makefile.am

@@ -0,0 +1,5 @@
+pkglib_LTLIBRARIES = smallservices.la
+smallservices_la_SOURCES = small-services.c
+smallservices_la_LDFLAGS = -module
+
+

SRC/contrib/small-services/README

@@ -0,0 +1,10 @@
+small-services is an echoping plugin which implements the following
+network services: 
+
+* echo (RFC 862)
+* discard (RFC 863)
+* chargen (RFC 864)
+
+As of today (2007-12-21), these services are in the main echoping tree
+but the idea is to move them to this plugin in the future. See
+echoping Feature Request #1694557 at Sourceforge.

SRC/contrib/small-services/configure.ac

@@ -0,0 +1,9 @@
+dnl $Id: configure.ac 377 2007-03-12 20:48:05Z bortz $
+
+AC_INIT(small-services, 0.0-BETA)
+AC_PROG_CC(cc gcc)
+AC_PROG_LIBTOOL
+AM_INIT_AUTOMAKE(foreign)
+AC_CONFIG_HEADERS(config.h)
+
+AC_OUTPUT(Makefile)

SRC/contrib/small-services/small-services.c

@@ -0,0 +1,58 @@
+/*
+ *
+ * $Id: daytime.c 395 2007-04-04 19:26:19Z bortz $
+ */
+
+#define IN_PLUGIN
+#include <echoping/echoping.h>
+
+struct addrinfo smallservices_server;
+int             sockfd;
+echoping_options options;
+
+char           *
+init(const int argc, const char **argv, echoping_options global_options)
+{
+    options = global_options;
+    /* TODO: the service returned must depend on the options */
+    return "echo";
+}
+
+void
+start(struct addrinfo *res)
+{
+    smallservices_server = *res;
+}
+
+int
+execute()
+{
+    int             nr;
+#define MAX 256
+#define TEST_STRING "test"
+    char            result[MAX];
+    if ((sockfd =
+         socket(smallservices_server.ai_family, smallservices_server.ai_socktype,
+                smallservices_server.ai_protocol)) < 0)
+        err_sys("Can't open socket");
+    if (connect
+        (sockfd, smallservices_server.ai_addr, smallservices_server.ai_addrlen) < 0)
+        err_sys("Can't connect to server");
+    if (write(sockfd, TEST_STRING, strlen(TEST_STRING)) != strlen(TEST_STRING))
+        err_sys("Cannot write");
+    nr = read(sockfd, result, strlen(TEST_STRING));
+    if (nr != strlen(TEST_STRING))
+        err_sys("Cannot read (only %i bytes)", nr);     /* TODO: the server may send 
+                                                         * the result in chunks, we 
+                                                         * should loop */
+    if (strcmp(result, TEST_STRING) != 0)
+        err_sys("Result \"%s\" is different from test string \"%s\"",
+                result, TEST_STRING);
+    close(sockfd);
+    return 1;
+}
+
+void
+terminate()
+{
+}

SRC/echoping.1.in

@@ -9,16 +9,17 @@ echoping \- tests a remote host with TCP or UDP
 .RI [-6] 
 .RI [-v] 
 .RI [-V] 
-.RI [-r] 
 .RI [-f fill] 
 .RI [-t timeout] 
 .RI [-c] 
 .RI [-d] 
 .RI [-u] 
+.RI [-T]
 .RI [-s size] 
 .RI [-n number] 
 .RI [-w delay] 
-.RI [-h url] 
+.RI [-h url-or-path]
+.RI [-R] 
 .RI [-i url] 
 .RI [-p priority] 
 .RI [-P tos] 
@@ -48,7 +49,7 @@ to use it (carefully) to measure Web performances.
 .SH ARGUMENT
 .IP hostname[:port]
 Name (or address) of the server to test. For HTTP, you can specify a
-port number. For HTTP and IPv6, you can use RFC 2732 syntax (you will
+port number. For HTTP and IPv6, you can use RFC 3986 syntax (you will
 probably need to escape the brackets from the shell). The name can be
 an IDN (Unicode domain name).
 
@@ -80,17 +81,21 @@ Number of seconds to wait a reply before giving up. For TCP, this is the
 maximum number of seconds for the whole connection (setup and data exchange).
 .IP -u
 Use UDP instead of TCP
+.IP -T
+Use SCTP instead of TCP
 .IP -d
 Use the "discard" service instead of echo
 .IP -c
 Use the "chargen" service instead of echo
-.IP -h\ url
+.IP -h\ url-or-path
 Use the HTTP protocol (instead of echo) for the given URL. If the
-hostname is the Web server, the URL has to
-be a relative one (for instance '/' or '/pics/foobar.gif') because HTTP 1.0
-servers will not understand a request for an absolute URL. If the
-hostname is a proxy/cache like Squid, the URL has to
-be an absolute one.
+hostname is the Web server, the argument has to
+be a path, a relative URL (for instance '/' or '/pics/foobar.gif'). If the
+hostname is a proxy/cache like Squid, the argument has to
+be an absolute URL.
+.IP -R 
+Accept HTTP status codes 3xx (redirections) as normal responses (the
+default is to regard them as errors)
 .IP -i\ url
 Use the ICP protocol (instead of echo) for the given URL. The URL has to
 be an absolute one. This is mostly for testing Squid Web proxy/caches.
@@ -102,14 +107,17 @@ Force the proxy (if you use one) to revalidate data with the original server
 Use the SSL/TLS (cryptography) protocol. For HTTP tests only.
 .IP -S
 Use the SMTP protocol (instead of echo) for the given server.
-.IP -r
-Use T/TCP (if it has been compiled with it). See the INSTALL file for details.
 .IP -4
 Use only IPv4 (even if the target machine has an IPv6 address)
 .IP -6
 Use only IPv6 (even if the target machine has an IPv4 address)
 .IP -f\ character
 Fill the packet with this character (default is random filling)
+.IP -D 
+Tries to display actual data transfer duration only, not total time
+.IP -N\ n
+Displays an average which excludes values ("outliers") which are
+further than +/- N*standard deviation 
 .IP -p\ n
 Send packets with the socket priority to the integer
 .IR n .
@@ -152,8 +160,8 @@ indicate the whole URL.
 .IP echoping\ \-h\ http://www.example.com/\ cache.example.com:3128
 Tests the remote Web proxy-cache and asks a Web page. Note that you must
 indicate the whole URL.
-.IP echoping\ -n\ 3\ -m\ whois\ foobar.example.com\ -r\ tao.example.org
-Loads the whois plugin and query the host foobar.example.com. "-r
+.IP echoping\ -n\ 3\ -m\ whois\ foobar.example.com\ -d\ tao.example.org
+Loads the whois plugin and query the host foobar.example.com. "-d
 tao.example.org" are options specific to the whois plugin.
 .IP echoping\ -u\ \-P\ 0xa0\ foobar.example.com
 Sends several UDP Echo packets with an IP Precedence of 5.
@@ -217,8 +225,8 @@ values (precedence on Linux, for instance).
 
 .SH BUGS
 
-See the TODO file or SourceForge bug tracking system at
-<http://sourceforge.net/bugs/?group_id=4581>.
+See SourceForge bug tracking system at
+<http://sourceforge.net/tracker/?group_id=4581&atid=104581>.
 
 .SH SEE ALSO
 See the README for information about other network measurements programs.

SRC/echoping.h

@@ -10,9 +10,8 @@
 
 #define DEFLINE 256
 #define UDPMAX 65535
-#ifdef HTTP
+/* Mostly for HTTP */
 #define MAXTOREAD 150000
-#endif
 #ifdef SMTP
 #define MAXSMTP 1024
 #define MAXSMTPLINES 30
@@ -24,6 +23,7 @@
 #include	<sys/types.h>
 #include	<netdb.h>
 #include	<sys/socket.h>
+#include        <netinet/tcp.h>
 #include	<netinet/in.h>
 #include	<arpa/inet.h>
 #include        <stdarg.h>
@@ -88,9 +88,6 @@ extern int sys_nerr;
 #ifdef HAVE_SIGACTION
 #define USE_SIGACTION 1
 #endif
-#ifdef HAVE_TTCP
-#define USE_TTCP 1
-#endif
 #ifdef HAVE_TOS
 #define USE_TOS 1
 #endif
@@ -208,6 +205,7 @@ void tvmin ();
 void tvmax ();
 int tvcmp ();
 void tvstddev ();
+void tvstddevavg ();
 double tv2double ();
 struct timeval double2tv ();
 /* http.c */
@@ -215,7 +213,7 @@ struct timeval double2tv ();
 char *make_http_sendline ();
 void find_server_and_port ();
 /* This one has prototypes, for a very subtile compiler issue. */
-int read_from_server (CHANNEL fs, short ssl);
+int read_from_server (CHANNEL fs, short ssl, boolean accept_redirects);
 #endif
 
 #ifdef ICP

SRC/echoping.spec

@@ -2,33 +2,30 @@
 
 Summary: Program to test network services
 Name: echoping
-Version: 5.0.1
+Version: 6.0.0
 Release: 1
 Copyright: GNU
 Group: Utilities/Network
 Packager: Stephane Bortzmeyer <bortz@users.sourceforge.net>
-Source0: echoping-5.0.1.tar.gz
-Url: http://echoping.sourceforge.net
-BuildRoot: /var/tmp/echoping
+Source:  https://github.com/bortzmeyer/echoping/archive/master.zip
+BuildRoot:    %{_tmppath}/%{name}-%{version}-build
+Url: http://bortzmeyer.github.io/echoping/
 Prefix: /usr/local
 # Requires: openssl
 # BuildRequires: openssl-devel openssl 
 
-
 %description
 
 "echoping" is a small program to test (approximatively) performances
 of a remote host by sending it TCP "echo" (or other protocol, like
 HTTP) packets.
 
-
-
 %prep
 
-%setup -q -n echoping-5.0.1
+%setup  -q # -n %{name}-%{version}
 
 %build
-./configure --prefix=$RPM_BUILD_ROOT/usr/local --enable-http --enable-icp --enable-smtp --enable-ttcp 
+./configure --prefix=$RPM_BUILD_ROOT/usr/local --enable-http --enable-icp --enable-smtp 
 make
 
 
@@ -36,16 +33,19 @@ make
 rm -rf $RPM_BUILD_ROOT
 
 %install
-make install
+make DESTDIR=$RPM_BUILD_ROOT install
 
 
 %files
 /
 %defattr(-,root,root)
 %doc AUTHORS COPYING ChangeLog DETAILS  NEWS README TODO 
+%doc %{_mandir}/man1/echoping.1*
 %doc  test-echoping-crypto    test-echoping-icp   test-echoping-local   test-echoping-remote
 
 %changelog
+* Wed Jun 30 2004 - cougar@random.ee
+- Merge
 * Thu Feb 20 2001 Paco <francisco.monserrat@rediris.es>
 -  RPM package
 

SRC/error.c

@@ -5,9 +5,9 @@
 /* Most of error-handling routines stolen from Stevens' books */
 
 void
-my_perror ()
+my_perror()
 {
-  fprintf (stderr, " %s\n", sys_err_str ());
+    fprintf(stderr, " %s\n", sys_err_str());
 }
 
 /*
@@ -20,20 +20,20 @@ my_perror ()
 
 /* VARARGS1 */
 void
-err_ret (char *str, ...)
+err_ret(char *str, ...)
 {
-  va_list args;
+    va_list         args;
 
-  va_start (args, str);
-  vfprintf (stderr, str, args);
-  va_end (args);
+    va_start(args, str);
+    vfprintf(stderr, str, args);
+    va_end(args);
 
-  my_perror ();
+    my_perror();
 
-  fflush (stdout);
-  fflush (stderr);
+    fflush(stdout);
+    fflush(stderr);
 
-  return;
+    return;
 }
 
 /*
@@ -47,16 +47,16 @@ err_ret (char *str, ...)
 
 /* VARARGS1 */
 void
-err_quit (char *str, ...)
+err_quit(char *str, ...)
 {
-  va_list args;
+    va_list         args;
 
-  va_start (args, str);
-  vfprintf (stderr, str, args);
-  fputc ('\n', stderr);
-  va_end (args);
+    va_start(args, str);
+    vfprintf(stderr, str, args);
+    fputc('\n', stderr);
+    va_end(args);
 
-  exit (1);
+    exit(1);
 }
 
 /*
@@ -71,25 +71,25 @@ err_quit (char *str, ...)
 
 /* VARARGS1 */
 void
-err_sys (char *str, ...)
+err_sys(char *str, ...)
 {
-  va_list args;
+    va_list         args;
 
-  va_start (args, str);
-  vfprintf (stderr, str, args);
-  va_end (args);
+    va_start(args, str);
+    vfprintf(stderr, str, args);
+    va_end(args);
 
-  my_perror ();
+    my_perror();
 
-  exit (1);
+    exit(1);
 }
 
 void
-usage (poptContext context)
+usage(poptContext context)
 {
-  poptPrintUsage (context, stderr, 0);
-  fprintf (stderr, " hostname [plugin-options...]\n");
-  exit (1);
+    poptPrintUsage(context, stderr, 0);
+    fprintf(stderr, " hostname [plugin-options...]\n");
+    exit(1);
 }
 
 /*
@@ -102,18 +102,15 @@ usage (poptContext context)
  * decimal value of errno to the other system. 
  */
 
-char *
-sys_err_str ()
+char           *
+sys_err_str()
 {
-  static char msgstr[200];
+    static char     msgstr[200];
 
-  if (errno != 0)
-    {
-      sprintf (msgstr, "(%s)", strerror (errno));
+    if (errno != 0) {
+        sprintf(msgstr, "(%s)", strerror(errno));
+    } else {
+        msgstr[0] = '\0';
     }
-  else
-    {
-      msgstr[0] = '\0';
-    }
-  return (msgstr);
+    return (msgstr);
 }

SRC/http.c

@@ -6,127 +6,148 @@
 #include "HTParse.h"
 
 
-char big_recvline[MAXTOREAD];
+char            big_recvline[MAXTOREAD];
 
-char *
-make_http_sendline (char *url, char *host, int port, int nocache)
+char           *
+make_http_sendline(char *url, char *host, int port, int nocache)
 {
-  short sport = (short) port;
-  int size = 200;		/* Enough? */
-  char *sendline = (char *) malloc (size);
-  char *hostname = (char *) malloc (size);
-  char *cache_directive = "";
+    short           sport = (short) port;
+    int             size = 350; /* Enough? RFC 2616, section 3.2.1 says 255 should
+                                 * be enough, although there is no hard limit. We
+                                 * reserve more because there * are the protocol
+                                 * elements, the HTTP headers, etc */
+    char           *sendline = (char *) malloc(size);
+    char           *hostname = (char *) malloc(size);
+    char           *cache_directive = "";
+    int             result;
 #ifdef HTTP10
-  if (nocache)
-    cache_directive = "Pragma: no-cache\r\n";	/* RFC 1945, "Hypertext
-						   Transfer Protocol --
-						   HTTP/1.0" */
-  sprintf (sendline,
-	   "GET %s HTTP/1.0\r\nUser-Agent: Echoping/%s\r\n%s\r\n",
-	   url, VERSION, cache_directive);
+    if (nocache)
+        cache_directive = "Pragma: no-cache\r\n";       /* RFC 1945, "Hypertext
+                                                         * Transfer Protocol * --
+                                                         * HTTP/1.0" */
+    result = snprintf(sendline, size,
+                      "GET %s HTTP/1.0\r\nUser-Agent: Echoping/%s\r\n%s\r\n",
+                      url, VERSION, cache_directive);
 #else
-  if (nocache)
-    {
-      if (nocache == 1)
-	cache_directive = "Cache-control: max-age=0\r\n";	/* Simply force a
-								   recheck with the
-								   server */
-      else
-	cache_directive = "Cache-control: no-cache\r\n";	/* RFC 2616
-								   "Hypertext
-								   Transfer
-								   Protocol --
-								   HTTP/1.1" */
+    if (nocache) {
+        if (nocache == 1)
+            cache_directive = "Cache-control: max-age=0\r\n";   /* Simply force a
+                                                                 * recheck with
+                                                                 * the server */
+        else
+            cache_directive = "Cache-control: no-cache\r\n";    /* RFC 2616
+                                                                 * "Hypertext
+                                                                 * Transfer Protocol 
+                                                                 * -- HTTP/1.1" */
     }
-  strcpy (hostname, HTParse (url, "", PARSE_HOST));
-  if (!strcmp (hostname, ""))
-    sprintf (hostname, "%s:%d", host, sport);
-  sprintf (sendline,
-	   "GET %s HTTP/1.1\r\nUser-Agent: Echoping/%s\r\nHost: %s\r\nConnection: close\r\n%s\r\n",
-	   url, VERSION, hostname, cache_directive);
-  free (hostname);
+    strncpy(hostname, HTParse(url, "", PARSE_HOST), size);      /* See bug #1688940
+                                                                 * to see why we use 
+                                                                 * * * strNcpy. */
+    hostname[size] = '\0';      /* Not added automatically */
+    if (!strcmp(hostname, ""))
+        snprintf(hostname, size, "%s:%d", host, sport);
+    result = snprintf(sendline, size,
+                      "GET %s HTTP/1.1\r\nUser-Agent: Echoping/%s\r\nHost: %s\r\nConnection: close\r\n%s\r\n",
+                      url, VERSION, hostname, cache_directive);
+    free(hostname);
 #endif
-  return sendline;
+    if (result >= size)
+        err_quit("URL and/or hostname too long(s)");
+    return sendline;
 }
 
 int
-read_from_server (CHANNEL fs, short ssl)
+read_from_server(CHANNEL fs, short ssl, boolean accept_redirects)
 {
-  int nr = 0;
-  int total = 0;
-  char reply_code;
-  int first_line = TRUE;
-  short body = FALSE;
+    int             nr = 0;
+    int             total = 0;
+    int             reply_code;
+    int             first_line = TRUE;
+    short           body = FALSE;
 #ifdef OPENSSL
-  int sslcode;
+    int             sslcode;
 #endif
-  while (!body && !timeout_flag)
-    {
-      if (!ssl)
-	nr = readline (fs.fs, big_recvline, MAXTOREAD, TRUE);
+    while (!body && !timeout_flag) {
+        if (!ssl)
+            nr = readline(fs.fs, big_recvline, MAXTOREAD, TRUE);
 #ifdef OPENSSL
-      else
-	{
-	  nr = SSL_readline (fs.ssl, big_recvline, MAXTOREAD, TRUE);
-	  if (nr == -1)
-	    {
-	      sslcode = ERR_get_error ();
-	      err_ret ("SSL_readline error: %s",
-		       ERR_error_string (sslcode, NULL));
-	    }
-	}
+        else {
+            nr = SSL_readline(fs.ssl, big_recvline, MAXTOREAD, TRUE);
+            if (nr == -1) {
+                sslcode = ERR_get_error();
+                err_ret("SSL_readline error: %s", ERR_error_string(sslcode, NULL));
+            }
+        }
 #endif
 #ifdef GNUTLS
-      else
-      {
-	nr = TLS_readline (fs.tls, big_recvline, MAXTOREAD, TRUE);
-	if (nr == -1)
-	  {
-	    err_ret ("TLS_readline error: %s", gnutls_strerror (nr));
-	  }
-      }
+        else
+        {
+            nr = TLS_readline(fs.tls, big_recvline, MAXTOREAD, TRUE);
+            if (nr == -1) {
+                err_ret("TLS_readline error: %s", gnutls_strerror(nr));
+            }
+        }
 #endif
-      /* printf ("DEBUG: reading \"%s\"\n (%d chars)\n", big_recvline, nr); */
-      /* HTTP replies should be separated by CR-LF. Unfortunately, some
-         servers send only CR :-( */
-      body = ((nr == 2) || (nr == 1));	/* Empty line CR-LF seen */
-      if ((nr < 1) && (timeout_flag))	/* Probably a timeout */
-	return -1;
-      if (nr < 1)
-	/* SourceForge bug #109385 */
-	/* err_sys ("Error reading HTTP header"); */
-	return -1;
-      /* if ((int) big_recvline[nr-1] == 10)
-         nr--; */
-      if (first_line)
-	{
-	  reply_code = big_recvline[9];	/* 9 because "HTTP/1.x 200..." */
-	  if (reply_code != '2')	/* Status codes beginning with 3 are not errors
-					   but should never appear in reply to echoping's requests */
-	    err_quit ("HTTP error \"%s\"", big_recvline);
-	}
-      total = total + nr;
-      first_line = FALSE;
+        /* 
+         * printf ("DEBUG: reading \"%s\"\n (%d chars)\n",
+         * big_recvline, nr);
+         */
+        /* 
+         * HTTP replies should be separated by CR-LF. Unfortunately,
+         * some servers send only CR :-(
+         */
+        body = ((nr == 2) || (nr == 1));        /* Empty line CR-LF seen */
+        if ((nr < 1) && (timeout_flag)) /* Probably a timeout */
+            return -1;
+        if (nr < 1)
+            /* SourceForge bug #109385 */
+            /* err_sys ("Error reading HTTP header"); */
+            return -1;
+        /* 
+         * if ((int) big_recvline[nr-1] == 10) nr--;
+         */
+        if (first_line) {
+            /* sscanf parse "HTTP/1.x 200" */
+            sscanf(big_recvline,"%*s %d", &reply_code);
+
+            /* 204 No Content is not an error, message body is empty by definition, see RFC 2616 */
+            if (reply_code == 204)
+                return 0;       /* zero bytes is correct */
+
+            if (!  (reply_code >= 200 && reply_code < 300) &&
+                ! ((reply_code >= 300 && reply_code < 400) && accept_redirects))
+                /* 
+                 * Status codes beginning with 3 are not
+                 * errors See bug #850674 and RFC 2616,
+                 * section 10.3
+                 */
+                err_quit("HTTP error \"%s\"", big_recvline);
+        }
+        total = total + nr;
+        first_line = FALSE;
     }
-  /* Read the body */
-  if (!ssl)
-    nr = readline (fs.fs, big_recvline, MAXTOREAD, FALSE);
+    /* Read the body */
+    if (!ssl)
+        nr = readline(fs.fs, big_recvline, MAXTOREAD, FALSE);
 #ifdef OPENSSL
-  else
-    nr = SSL_readline (fs.ssl, big_recvline, MAXTOREAD, FALSE);
+    else
+        nr = SSL_readline(fs.ssl, big_recvline, MAXTOREAD, FALSE);
 #endif
 #ifdef GNUTLS
-  else
-  nr = TLS_readline (fs.tls, big_recvline, MAXTOREAD, FALSE);
+    else
+    nr = TLS_readline(fs.tls, big_recvline, MAXTOREAD, FALSE);
 #endif
-  /* printf ("DEBUG: reading body \"%s\"\n (%d chars)\n", big_recvline, nr);  */
-  if ((nr < 2) && (timeout_flag))	/* Probably a timeout */
-    return -1;
-  if (nr < 2)			/* Hmm, if the body is empty, we'll
-				   get a meaningless error message */
-    err_sys ("Error reading HTTP body");
-  total = total + nr;
-  return total;			/* How to do if we want only the body's size? */
+    /* 
+     * printf ("DEBUG: reading body \"%s\"\n (%d chars)\n", big_recvline,
+     * nr);
+     */
+    if ((nr < 2) && (timeout_flag))     /* Probably a timeout */
+        return -1;
+    if (nr < 2)                 /* Hmm, if the body is empty, we'll get a * * * * *
+                                 * * * meaningless error message */
+        err_sys("Error reading HTTP body");
+    total = total + nr;
+    return total;               /* How to do if we want only the body's size? */
 }
 
-#endif /* HTTP */
+#endif                          /* HTTP */

SRC/icp.c

@@ -11,97 +11,96 @@
 #ifdef ICP
 
 
-void *
-make_icp_sendline (url, shost, opcode, length)
-     const char *url;
-     u_num32 *shost;
-     icp_opcode opcode;
-     int *length;
+void           *
+make_icp_sendline(url, shost, opcode, length)
+    const char     *url;
+    u_num32        *shost;
+    icp_opcode      opcode;
+    int            *length;
 
 {
-  icp_common_t *headerp = NULL;
-  char *buf = NULL;
-  char *urloffset = NULL;
-  u_num32 flags = ICP_FLAG_SRC_RTT;
-  u_num32 pad = 0;
-  u_num32 reqnum = 4711;
-  unsigned short buf_len;
+    icp_common_t   *headerp = NULL;
+    char           *buf = NULL;
+    char           *urloffset = NULL;
+    u_num32         flags = ICP_FLAG_SRC_RTT;
+    u_num32         pad = 0;
+    u_num32         reqnum = 4711;
+    unsigned short  buf_len;
 
-  buf_len = sizeof (icp_common_t) + strlen (url) + 1;
-  if (opcode == ICP_OP_QUERY)
-    buf_len += sizeof (u_num32);
-  buf = calloc (buf_len, 1);
-  headerp = (icp_common_t *) buf;
-  headerp->opcode = opcode;
-  headerp->version = ICP_VERSION_CURRENT;
-  headerp->length = htons (buf_len);
-  headerp->reqnum = htonl (reqnum);
-  headerp->flags = htonl (flags);
-  headerp->pad = pad;
-  if (shost)
-    headerp->shostid = htonl (*shost);
-  /* urloffset = (char *) ((int) buf + sizeof(icp_common_t)); */
-  urloffset = (char *) (buf + sizeof (icp_common_t));
-  if (opcode == ICP_OP_QUERY)
-    urloffset += sizeof (u_num32);
-  memcpy (urloffset, url, strlen (url));
-  *length = buf_len;
-  return buf;
+    buf_len = sizeof(icp_common_t) + strlen(url) + 1;
+    if (opcode == ICP_OP_QUERY)
+        buf_len += sizeof(u_num32);
+    buf = calloc(buf_len, 1);
+    headerp = (icp_common_t *) buf;
+    headerp->opcode = opcode;
+    headerp->version = ICP_VERSION_CURRENT;
+    headerp->length = htons(buf_len);
+    headerp->reqnum = htonl(reqnum);
+    headerp->flags = htonl(flags);
+    headerp->pad = pad;
+    if (shost)
+        headerp->shostid = htonl(*shost);
+    /* urloffset = (char *) ((int) buf + sizeof(icp_common_t)); */
+    urloffset = (char *) (buf + sizeof(icp_common_t));
+    if (opcode == ICP_OP_QUERY)
+        urloffset += sizeof(u_num32);
+    memcpy(urloffset, url, strlen(url));
+    *length = buf_len;
+    return buf;
 }
 
 int
-recv_icp (sockfd, buf, retcode)
-     int sockfd;
-     char *buf;
-     char *retcode;
+recv_icp(sockfd, buf, retcode)
+    int             sockfd;
+    char           *buf;
+    char           *retcode;
 
-{				/*
-				 * based on draft-wessels-icp-v2-02.txt 
-				 */
-  icp_common_t *headerp = (icp_common_t *) buf;
-  int nr, length;
-  unsigned char opcode;
-  static char *icp_op_code[] = {
-    /*  0 */ "ICP_OP_INVALID",
-    /*  1 */ "ICP_OP_QUERY",
-    /*  2 */ "ICP_OP_HIT",
-    /*  3 */ "ICP_OP_MISS",
-    /*  4 */ "ICP_OP_ERR",
-    /*  5 */ "",
-    /*  6 */ "",
-    /*  7 */ "",
-    /*  8 */ "",
-    /*  9 */ "",
-    /* 10 */ "ICP_OP_SECHO",
-    /* 11 */ "ICP_OP_DECHO",
-    /* 12 */ "",
-    /* 13 */ "",
-    /* 14 */ "",
-    /* 15 */ "",
-    /* 16 */ "",
-    /* 17 */ "",
-    /* 18 */ "",
-    /* 19 */ "",
-    /* 20 */ "",
-    /* 21 */ "ICP_OP_MISS_NOFETCH",
-    /* 22 */ "ICP_OP_DENIED",
-    /* 23 */ "ICP_OP_HIT_OBJ"
-  };
+{                               /* 
+                                 * based on draft-wessels-icp-v2-02.txt 
+                                 */
+    icp_common_t   *headerp = (icp_common_t *) buf;
+    int             nr, length;
+    unsigned char   opcode;
+    static char    *icp_op_code[] = {
+        /* 0 */ "ICP_OP_INVALID",
+        /* 1 */ "ICP_OP_QUERY",
+        /* 2 */ "ICP_OP_HIT",
+        /* 3 */ "ICP_OP_MISS",
+        /* 4 */ "ICP_OP_ERR",
+        /* 5 */ "",
+        /* 6 */ "",
+        /* 7 */ "",
+        /* 8 */ "",
+        /* 9 */ "",
+        /* 10 */ "ICP_OP_SECHO",
+        /* 11 */ "ICP_OP_DECHO",
+        /* 12 */ "",
+        /* 13 */ "",
+        /* 14 */ "",
+        /* 15 */ "",
+        /* 16 */ "",
+        /* 17 */ "",
+        /* 18 */ "",
+        /* 19 */ "",
+        /* 20 */ "",
+        /* 21 */ "ICP_OP_MISS_NOFETCH",
+        /* 22 */ "ICP_OP_DENIED",
+        /* 23 */ "ICP_OP_HIT_OBJ"
+    };
 
 
-  nr = recvfrom (sockfd, buf, DEFLINE, 0, (struct sockaddr *) 0, (int *) 0);
-  if (nr < 0)
-    {
-      if (timeout_flag)
-	err_quit ("Timeout while reading");
-      else
-	err_sys ("No reply from ICP proxy server");
+    nr = recvfrom(sockfd, buf, DEFLINE, 0, (struct sockaddr *) 0, (int *) 0);
+    if (nr < 0) {
+        if (timeout_flag)
+            err_quit("Timeout while reading");
+        else
+            err_sys("No reply from ICP proxy server");
     }
-  opcode = headerp->opcode;
-  length = ntohs (headerp->length);
-  sprintf (retcode, "ICP reply: \42%s\42", icp_op_code[opcode]);
-  return length;
+    opcode = headerp->opcode;
+    length = ntohs(headerp->length);
+    sprintf(retcode, "ICP reply: \42%s\42", icp_op_code[opcode]);
+    return length;
 }
 
 
-#endif /* ICP */
+#endif                          /* ICP */

SRC/icp.h

@@ -11,10 +11,12 @@
 #define ICP_FLAG_HIT_OBJ	0x80000000ul
 #define ICP_FLAG_SRC_RTT	0x40000000ul
 
-#ifdef __alpha__
+#if SIZEOF_INT == 4
 typedef unsigned int u_num32;
-#else
+#elif SIZEOF_LONG == 4
 typedef unsigned long u_num32;
+#else
+#error "No suitable type for representing a 32-bits value"
 #endif
 
 struct icp_common_s {

SRC/misc/test-long-urls

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# Bug 1688940
+
+# OK
+./echoping -v -h "/?query=0123456789656565864854129568977808708770878781672766762766742213542786502345617812784576590234567890123456784455644855856556697867566473432623422345678901234567890123478901234567565719787867155665376556472234516542568425446852434177664277876766" www.james.rcpt.to 
+
+echo ""
+
+# Too long
+./echoping -v -h "/?query=01234567896565658648541295689778087087708787816727667627667422135427865023456178127845765901234567890123456784455644855856556697867566473432623422345678901234567890123478901234567565719787867155665376556472234516542568425446852434177664277876766" www.james.rcpt.to 

SRC/missing

@@ -1,360 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2003-09-02.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

SRC/mkinstalldirs

@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

SRC/plugins/Makefile.in

@@ -1,585 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure config.guess \
-	config.sub depcomp install-sh ltmain.sh missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../configure-common.ac \
-	$(top_srcdir)/list-of-dirs.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-plugins_dir = @plugins_dir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-subdirs = @subdirs@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-SUBDIRS = @subdirs@
-CONFIGURE_DEPENDENCIES = list-of-dirs.m4 ../configure-common.ac configure-plugins.ac
-all: all-recursive
-
-.SUFFIXES:
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || mkdir "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="../$(top_distdir)" \
-	        distdir="../$(distdir)/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-libtool clean-recursive \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-libtool distclean-recursive \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
-	install-info install-info-am install-man install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am uninstall-info-am
-
-
-list-of-dirs.m4: 
-	@echo "dnl Created automatically on `date`" > $@
-	for file in `ls | grep -v CVS | grep -v autom4te`; do \
-		if test -d $$file; then \
-			echo "if test \"\$$$${file}_BUILD\" = 1; then" >> $@ ; \
-			echo "  AC_CONFIG_SUBDIRS($$file)" >> $@ ; \
-			echo "fi" >> $@ ; \
-		fi \
-	done
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/configure.ac

@@ -5,10 +5,10 @@ AM_INIT_AUTOMAKE(foreign)
 dnl TODO: write a XML-RPC plugin for Adamsnames' interface. See a first version in contrib/
 AC_ARG_ENABLE(plugin,
 [  --enable-plugin=LIST  Build only the following plugins],
-[if test "$enableval" == "no"; then
+[if test "$enableval" = "no"; then
    AC_MSG_ERROR([You cannot disable plugin support])
 else
-   if test "$enableval" == "yes"; then
+   if test "$enableval" = "yes"; then
       AC_MSG_ERROR([You must indicate a list of plugins with this option])
    else
       plugins=$enableval

SRC/plugins/dns/Makefile.in

@@ -1,649 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(dns_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../../config.guess \
-	$(srcdir)/../../config.sub $(srcdir)/../../depcomp \
-	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
-	$(srcdir)/../../missing $(srcdir)/../../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../configure-common.ac \
-	$(top_srcdir)/../configure-plugins.ac \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-dns_la_LIBADD =
-am__dns_la_SOURCES_DIST = dns.c
-@DNSBUILD_TRUE@am_dns_la_OBJECTS = dns.lo
-dns_la_OBJECTS = $(am_dns_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/../../depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/dns.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(dns_la_SOURCES)
-DIST_SOURCES = $(am__dns_la_SOURCES_DIST)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DNSBUILD_FALSE = @DNSBUILD_FALSE@
-DNSBUILD_TRUE = @DNSBUILD_TRUE@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-@DNSBUILD_TRUE@pkglib_LTLIBRARIES = dns.la
-@DNSBUILD_TRUE@dns_la_SOURCES = dns.c
-@DNSBUILD_TRUE@dns_la_LDFLAGS = -module
-man_MANS = echoping_dns.1
-EXTRA_DIST = $(man_MANS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-dns.la: $(dns_la_OBJECTS) $(dns_la_DEPENDENCIES) 
-	$(LINK) -rpath $(pkglibdir) $(dns_la_LDFLAGS) $(dns_la_OBJECTS) $(dns_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dns.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.. $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-man \
-	uninstall-pkglibLTLIBRARIES
-
-uninstall-man: uninstall-man1
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-man1 install-pkglibLTLIBRARIES \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am uninstall-man uninstall-man1 \
-	uninstall-pkglibLTLIBRARIES
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/dns/config.h.in

@@ -1,76 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `bind' library (-lbind). */
-#undef HAVE_LIBBIND
-
-/* Define to 1 if you have the `popt' library (-lpopt). */
-#undef HAVE_LIBPOPT
-
-/* Define to 1 if you have the `resolv' library (-lresolv). */
-#undef HAVE_LIBRESOLV
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `poptGetContext' function. */
-#undef HAVE_POPTGETCONTEXT
-
-/* Define if you have the _res variable */
-#undef HAVE_RES
-
-/* Define if you have the _res_ext variable (for IPv6) */
-#undef HAVE_RES_EXT
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Internationalized Domain Names support */
-#undef LIBIDN
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

SRC/plugins/dns/configure.ac

@@ -10,10 +10,24 @@ DNS_BUILD=1
 AC_CHECK_FUNCS(poptGetContext,, 
    [AC_CHECK_LIB(popt,poptGetContext,,[AC_MSG_WARN([No popt development environment found, not building this plugin]) && DNS_BUILD=0])])
 if test "$DNS_BUILD" != "0"; then
+
  AC_CHECK_FUNC(res_mkquery, , 
   [AC_CHECK_LIB(bind, res_mkquery, , 
    [AC_CHECK_LIB(resolv, res_mkquery, , 
-        [AC_MSG_ERROR([No DNS resolver development environment found, not building this plugin]) && DNS_BUILD=0])])])
+dnl http://bugs.debian.org/254089
+	[ saved_LIBS="$LIBS"
+	LIBS="$LIBS -lresolv"
+	AC_MSG_CHECKING(for res_mkquery in -lresolv again)
+	AC_LINK_IFELSE([[
+#include <resolv.h>
+int main()
+{
+	res_mkquery (0, 0, 0, 0, 0, 0, 0, 0, 0);
+	return 0;
+}]],
+	LIBS="$saved_LIBS -lresolv"; AC_MSG_RESULT(yes),
+	LIBS="$saved_LIBS"; AC_MSG_RESULT(no)
+        [AC_MSG_WARN([No DNS resolver development environment found, not building this plugin]) && DNS_BUILD=0])])])])
 fi
 
 AC_MSG_CHECKING([_res ])

SRC/plugins/dns/dns.c

@@ -12,12 +12,12 @@
 #include <resolv.h>
 
 struct addrinfo name_server;
-poptContext dns_poptcon;
-char *request;
-int type;
-char *type_name = NULL;
-boolean use_tcp = FALSE;
-boolean no_recurse = FALSE;
+poptContext     dns_poptcon;
+char           *request;
+int             type;
+char           *type_name = NULL;
+boolean         use_tcp = FALSE;
+boolean         no_recurse = FALSE;
 
 /* nsError stolen from Liu & Albitz check_soa (in their book "DNS and BIND") */
 
@@ -34,199 +34,182 @@ boolean no_recurse = FALSE;
  *     strings.                                                 *
  ****************************************************************/
 int
-nsError (error, domain)
-     int error;
-     char *domain;
+nsError(error, domain)
+    int             error;
+    char           *domain;
 {
-  switch (error)
-    {
+    switch (error) {
     case HOST_NOT_FOUND:
-      err_ret ("Unknown domain: %s\n", domain);
-      return -1;
+        err_ret("Unknown domain: %s\n", domain);
+        return -1;
     case NO_DATA:
-      err_ret ("No records of type %s for %s in the Answer section\n",
-	       to_upper (type_name), domain);
-      return -1;
+        err_ret("No records of type %s for %s in the Answer section\n",
+                to_upper(type_name), domain);
+        return -1;
     case TRY_AGAIN:
-      err_ret ("No response for query\n");
-      return -2;
+        err_ret("No response for query\n");
+        return -2;
     default:
-      err_ret ("Unexpected error\n");
-      return -1;
+        err_ret("Unexpected error\n");
+        return -1;
     }
 }
 
 void
-dns_usage (const char *msg)
+dns_usage(const char *msg)
 {
-	if (msg) {
-		fprintf(stderr, "Error: %s\n", msg);
-	}
-	poptPrintUsage(dns_poptcon, stderr, 0);
-	fprintf(stderr, "  request\n");
-	exit(1);
+    if (msg) {
+        fprintf(stderr, "Error: %s\n", msg);
+    }
+    poptPrintUsage(dns_poptcon, stderr, 0);
+    fprintf(stderr, "  request\n");
+    exit(1);
 }
 
-char *
-init (const int argc, const char **argv)
+char           *
+init(const int argc, const char **argv)
 {
-  int value;
-  char *hostname;
-  char *msg = malloc (256);
-  char *upper_type_name = NULL;
-  /* popt variables */
-  struct poptOption options[] = {
-    {"type", 't', POPT_ARG_STRING, &type_name, 0,
-     "Type of resources queried (A, MX, SOA, etc)",
-     "type"},
-    {"tcp", NULL, POPT_ARG_NONE, &use_tcp, 0,
-     "Use TCP for the request (virtual circuit)",
-     "tcp"},
-    {"no-recurse", NULL, POPT_ARG_NONE, &no_recurse, 0,
-     "Do not ask recursion",
-     "no-recurse"},
-    POPT_AUTOHELP POPT_TABLEEND
-  };
-  dns_poptcon = poptGetContext (NULL, argc,
-				argv, options, POPT_CONTEXT_KEEP_FIRST);
-  while ((value = poptGetNextOpt (dns_poptcon)) > 0)
-    {
-    }
-  if (value < -1)
-    {
-      sprintf (msg, "%s: %s",
-	       poptBadOption (dns_poptcon, POPT_BADOPTION_NOALIAS),
-	       poptStrerror (value));
-      dns_usage (msg);
+    int             value;
+    char           *hostname;
+    char           *msg = malloc(256);
+    char           *upper_type_name = NULL;
+    /* popt variables */
+    struct poptOption options[] = {
+        {"type", 't', POPT_ARG_STRING, &type_name, 0,
+         "Type of resources queried (A, MX, SOA, etc)",
+         "type"},
+        {"tcp", (char) NULL, POPT_ARG_NONE, &use_tcp, 0,
+         "Use TCP for the request (virtual circuit)",
+         "tcp"},
+        {"no-recurse", (char) NULL, POPT_ARG_NONE, &no_recurse, 0,
+         "Do not ask recursion",
+         "no-recurse"},
+        POPT_AUTOHELP POPT_TABLEEND
+    };
+    dns_poptcon = poptGetContext(NULL, argc, argv, options, POPT_CONTEXT_KEEP_FIRST);
+    while ((value = poptGetNextOpt(dns_poptcon)) > 0) {
     }
-  hostname = (char *) poptGetArg (dns_poptcon);	/* Not used */
-  request = (char *) poptGetArg (dns_poptcon);
-  if (request == NULL)
-    dns_usage ("Mandatory request missing");
-  if ((type_name == NULL) || !strcmp (type_name, ""))
-    {
-      type = T_A;
-      type_name = "A";
+    if (value < -1) {
+        sprintf(msg, "%s: %s",
+                poptBadOption(dns_poptcon, POPT_BADOPTION_NOALIAS),
+                poptStrerror(value));
+        dns_usage(msg);
     }
-  else
-    {
-      upper_type_name = (char *) to_upper (type_name);
-      /*
-       * TODO: a better algorithm. Use dns_rdatatype_fromtext in
-       * BIND ?
-       */
-      if (!strcmp (upper_type_name, "A"))
-	type = T_A;
-      else if (!strcmp (upper_type_name, "AAAA"))
-	type = T_AAAA;
-      else if (!strcmp (upper_type_name, "NS"))
-	type = T_NS;
-      else if (!strcmp (upper_type_name, "SOA"))
-	type = T_SOA;
-      else if (!strcmp (upper_type_name, "MX"))
-	type = T_MX;
-      else if (!strcmp (upper_type_name, "SRV"))
-	type = T_SRV;
-      else if (!strcmp (upper_type_name, "CNAME"))
-	type = T_CNAME;
-      else if (!strcmp (upper_type_name, "PTR"))
-	type = T_PTR;
-      else if (!strcmp (upper_type_name, "TXT"))
-	type = T_TXT;
-      else if (!strcmp (upper_type_name, "ANY"))
-	type = T_ANY;
-      else
-	dns_usage ("Unknown type");
+    hostname = (char *) poptGetArg(dns_poptcon);        /* Not used */
+    request = (char *) poptGetArg(dns_poptcon);
+    if (request == NULL)
+        dns_usage("Mandatory request missing");
+    if ((type_name == NULL) || !strcmp(type_name, "")) {
+        type = T_A;
+        type_name = "A";
+    } else {
+        upper_type_name = (char *) to_upper(type_name);
+        /* 
+         * TODO: a better algorithm. Use dns_rdatatype_fromtext in
+         * BIND ?
+         */
+        if (!strcmp(upper_type_name, "A"))
+            type = T_A;
+        else if (!strcmp(upper_type_name, "AAAA"))
+            type = T_AAAA;
+        else if (!strcmp(upper_type_name, "NS"))
+            type = T_NS;
+        else if (!strcmp(upper_type_name, "SOA"))
+            type = T_SOA;
+        else if (!strcmp(upper_type_name, "MX"))
+            type = T_MX;
+        else if (!strcmp(upper_type_name, "SRV"))
+            type = T_SRV;
+        else if (!strcmp(upper_type_name, "CNAME"))
+            type = T_CNAME;
+        else if (!strcmp(upper_type_name, "PTR"))
+            type = T_PTR;
+        else if (!strcmp(upper_type_name, "TXT"))
+            type = T_TXT;
+        else if (!strcmp(upper_type_name, "ANY"))
+            type = T_ANY;
+        else
+            dns_usage("Unknown type");
     }
-  return "domain";
+    return "domain";
 }
 
 void
-start (struct addrinfo *res)
+start(struct addrinfo *res)
 {
-  struct sockaddr name_server_sockaddr;
-  struct sockaddr_in name_server_sockaddr_in;
-  struct sockaddr_in6 name_server_sockaddr_in6;
-  name_server = *res;
-  name_server_sockaddr = *name_server.ai_addr;
-  if (name_server_sockaddr.sa_family == AF_INET)
-    {
-      /* Converts a generic sockaddr to an IPv4 sockaddr_in */
-      (void) memcpy ((void *) &name_server_sockaddr_in, &name_server_sockaddr,
-		     sizeof (struct sockaddr));
-    }
-  else if (name_server_sockaddr.sa_family == AF_INET6)
-    {
-      /* TODO: the code for IPv6 servers is hopelessly broken. Start again */
-      fprintf (stderr, "WARNING: IPv6 nameservers not really supported yet (experts may apply). Falling back to IPv4 and the default server. You may use -4, too\n");
+    struct sockaddr name_server_sockaddr;
+    struct sockaddr_in name_server_sockaddr_in;
+    struct sockaddr_in6 name_server_sockaddr_in6;
+    name_server = *res;
+    name_server_sockaddr = *name_server.ai_addr;
+    if (name_server_sockaddr.sa_family == AF_INET) {
+        /* Converts a generic sockaddr to an IPv4 sockaddr_in */
+        (void) memcpy((void *) &name_server_sockaddr_in,
+                      &name_server_sockaddr, sizeof(struct sockaddr));
+    } else if (name_server_sockaddr.sa_family == AF_INET6) {
 #ifdef HAVE_RES_EXT
-      /* Converts a generic sockaddr to an IPv6 sockaddr_in6 */
-      (void) memcpy ((void *) &name_server_sockaddr_in6,
-		     &name_server_sockaddr, sizeof (struct sockaddr));
+        /* TODO: the code for IPv6 servers is hopelessly broken. Start again */
+        fprintf(stderr,
+                "WARNING: IPv6 nameservers not really supported yet (experts may apply). Falling back to IPv4 and the default server. You may use -4, too\n");
+        /* Converts a generic sockaddr to an IPv6 sockaddr_in6 */
+        (void) memcpy((void *) &name_server_sockaddr_in6,
+                      &name_server_sockaddr, sizeof(struct sockaddr));
 #else
-      err_quit
-	("IPv6 name servers not supported on this platform, may be you should use the -4 option");
+        err_quit
+            ("IPv6 name servers not supported on this platform, may be you should use the -4 option");
 #endif
+    } else {
+        err_quit("Unknown family for address of the server");
     }
-  else
-    {
-      err_quit ("Unknown family for address of the server");
-    }
-  if (res_init () < 0)
-    err_sys ("res_init");
-  if (name_server_sockaddr.sa_family == AF_INET)
-    {
-      _res.nsaddr_list[0] = name_server_sockaddr_in;
-    }
-  else if (name_server_sockaddr.sa_family == AF_INET6)
-    {
+    if (res_init() < 0)
+        err_sys("res_init");
+    if (name_server_sockaddr.sa_family == AF_INET) {
+        _res.nsaddr_list[0] = name_server_sockaddr_in;
+    } else if (name_server_sockaddr.sa_family == AF_INET6) {
 #ifdef HAVE_RES_EXT
-		/* TODO: completely broken, dioes not work. Check in Stevens */
-		(void)memcpy(_res_ext.nsaddr_list, &name_server_sockaddr_in6, sizeof(struct sockaddr_in6));
+        /* TODO: completely broken, dioes not work. Check in Stevens */
+        (void) memcpy(_res_ext.nsaddr_list, &name_server_sockaddr_in6,
+                      sizeof(struct sockaddr_in6));
 #endif
     }
-  _res.nscount = 1;
-  _res.options &= ~(RES_DNSRCH | RES_DEFNAMES | RES_NOALIASES);
-  if (use_tcp)
-    {
-      _res.options |= RES_USEVC;
+    _res.nscount = 1;
+    _res.options &= ~(RES_DNSRCH | RES_DEFNAMES | RES_NOALIASES);
+    if (use_tcp) {
+        _res.options |= RES_USEVC;
     }
-  if (no_recurse)
-    {
-      _res.options &= ~RES_RECURSE;
+    if (no_recurse) {
+        _res.options &= ~RES_RECURSE;
     }
 }
 
 int
-execute ()
+execute()
 {
-  union
-  {
-    HEADER hdr;			/* defined in resolv.h */
-    u_char buf[PACKETSZ];	/* defined in arpa/nameser.h */
-  } response;			/* response buffers */
-  int response_length;		/* buffer length */
-  if ((response_length = res_query (request,	/* the domain we care
-						 * about   */
-				    C_IN,	/* Internet class records     */
-				    type, (u_char *) & response,	/* response buffer */
-				    sizeof (response)))	/* buffer size    */
-      < 0)
-    {				/* If negative    */
-      nsError (h_errno, request);	/* report the error           */
-      if (h_errno == TRY_AGAIN)
-	return -1;		/* More luck next time? */
-      else
-	return -2;		/* Give in */
+    union {
+        HEADER          hdr;    /* defined in resolv.h */
+        u_char          buf[PACKETSZ];  /* defined in arpa/nameser.h */
+    } response;                 /* response buffers */
+    int             response_length;    /* buffer length */
+    if ((response_length = res_query(request,   /* the domain we care about */
+                                     C_IN,      /* Internet class records */
+                                     type, (u_char *) & response,       /* response
+                                                                         * buffer */
+                                     sizeof(response))) /* buffer size */
+        <0) {                   /* If negative */
+        nsError(h_errno, request);      /* report the error */
+        if (h_errno == TRY_AGAIN)
+            return -1;          /* More luck next time? */
+        else
+            return -2;          /* Give in */
     }
-  /*
-   * TODO: better analysis of the replies. For instance, replies can be
-   * in the authority section (delegation info)
-   */
-  return 0;
+    /* 
+     * TODO: better analysis of the replies. For instance, replies can be
+     * in the authority section (delegation info)
+     */
+    return 0;
 }
 
 void
-terminate ()
+terminate()
 {
 }

SRC/plugins/dns/echoping_dns.1

@@ -32,6 +32,7 @@ echoping_dns \- echoping plugin which queries a DNS server
 dns is an echoping plugin, fo testing the performances of DNS (RFC
 1034 and 1035) servers.
 .SH ARGUMENTS
+.TP
 .B request 
 A domain name
 .SH OPTIONS

SRC/plugins/ldap/Makefile.am

@@ -2,9 +2,9 @@ if LDAPBUILD
 pkglib_LTLIBRARIES = ldap.la
 ldap_la_SOURCES = ldap.c
 ldap_la_LDFLAGS = -module
-man_MANS = echoping_ldap.1
 endif
+man_MANS = echoping_ldap.1
 
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = $(man_MANS) test.sh
 
 # $Id$

SRC/plugins/ldap/Makefile.in

@@ -1,651 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(ldap_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../../config.guess \
-	$(srcdir)/../../config.sub $(srcdir)/../../depcomp \
-	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
-	$(srcdir)/../../missing $(srcdir)/../../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../configure-common.ac \
-	$(top_srcdir)/../configure-plugins.ac \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-ldap_la_LIBADD =
-am__ldap_la_SOURCES_DIST = ldap.c
-@LDAPBUILD_TRUE@am_ldap_la_OBJECTS = ldap.lo
-ldap_la_OBJECTS = $(am_ldap_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/../../depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/ldap.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(ldap_la_SOURCES)
-DIST_SOURCES = $(am__ldap_la_SOURCES_DIST)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDAPBUILD_FALSE = @LDAPBUILD_FALSE@
-LDAPBUILD_TRUE = @LDAPBUILD_TRUE@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-@LDAPBUILD_TRUE@pkglib_LTLIBRARIES = ldap.la
-@LDAPBUILD_TRUE@ldap_la_SOURCES = ldap.c
-@LDAPBUILD_TRUE@ldap_la_LDFLAGS = -module
-@LDAPBUILD_TRUE@man_MANS = echoping_ldap.1
-EXTRA_DIST = $(man_MANS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-ldap.la: $(ldap_la_OBJECTS) $(ldap_la_DEPENDENCIES) 
-	$(LINK) -rpath $(pkglibdir) $(ldap_la_LDFLAGS) $(ldap_la_OBJECTS) $(ldap_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ldap.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.. $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-man \
-	uninstall-pkglibLTLIBRARIES
-
-uninstall-man: uninstall-man1
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-man1 install-pkglibLTLIBRARIES \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am uninstall-man uninstall-man1 \
-	uninstall-pkglibLTLIBRARIES
-
-
-# $Id$
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/ldap/config.h.in

@@ -1,70 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `ldap_open' function. */
-#undef HAVE_LDAP_OPEN
-
-/* Define to 1 if you have the `ldap' library (-lldap). */
-#undef HAVE_LIBLDAP
-
-/* Define to 1 if you have the `popt' library (-lpopt). */
-#undef HAVE_LIBPOPT
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `poptGetContext' function. */
-#undef HAVE_POPTGETCONTEXT
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Internationalized Domain Names support */
-#undef LIBIDN
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

SRC/plugins/ldap/ldap.c

@@ -11,153 +11,153 @@
 #endif
 #include <ldap.h>
 
-const char *request = NULL;
-const char *base = NULL;
-int scope = LDAP_SCOPE_BASE;
-const char *hostname;
-int port = 0;
-LDAP *session;
-poptContext ldap_poptcon;
+const char     *request = NULL;
+const char     *base = NULL;
+int             scope = LDAP_SCOPE_BASE;
+const char     *hostname;
+int             port = 0;
+LDAP           *session;
+poptContext     ldap_poptcon;
 echoping_options global_options;
 
 void
-ldap_usage (const char *msg)
+ldap_usage(const char *msg)
 {
-  if (msg)
-    {
-      printf ("LDAP plugin error: %s\n", msg);
+    if (msg) {
+        printf("LDAP plugin error: %s\n", msg);
     }
-  poptPrintUsage (ldap_poptcon, stdout, 0);
-  exit (1);
+    poptPrintUsage(ldap_poptcon, stdout, 0);
+    exit(1);
 }
 
-char *
-init (const int argc, const char **argv,
-      const echoping_options global_external_options)
+char           *
+init(const int argc, const char **argv,
+     const echoping_options global_external_options)
 {
-  int value;
-  char *msg = malloc (MAX_LINE);
-  char *rest, *port_text;
-  char *scope_string = NULL;
-  /* popt variables */
-  struct poptOption options[] = {
-    {"request", 'r', POPT_ARG_STRING, &request, 0,
-     "Request (filter) to send to the LDAP server", "r"},
-    {"base", 'b', POPT_ARG_STRING, &base, 0,
-     "Base of the LDAP tree", "b"},
-    {"scope", 's', POPT_ARG_STRING, &scope_string, 0,
-     "Scope of the search in the LDAP tree (sub, one or base)", "s"},
-    {"port", 'p', POPT_ARG_INT, &port, 0,
-     "TCP port to connect to the LDAP server", "p"},
-    POPT_AUTOHELP POPT_TABLEEND
-  };
-  global_options = global_external_options;
-  if (global_options.udp)
-    err_quit ("UDP makes no sense for a LDAP connection");
-  ldap_poptcon = poptGetContext (NULL, argc,
-				 argv, options, POPT_CONTEXT_KEEP_FIRST);
-  while ((value = poptGetNextOpt (ldap_poptcon)) > 0)
-    {
+    int             value;
+    char           *msg = malloc(MAX_LINE);
+    char           *rest, *port_text;
+    char           *scope_string = NULL;
+    /* popt variables */
+    struct poptOption options[] = {
+        {"request", 'r', POPT_ARG_STRING, &request, 0,
+         "Request (filter) to send to the LDAP server", "r"},
+        {"base", 'b', POPT_ARG_STRING, &base, 0,
+         "Base of the LDAP tree", "b"},
+        {"scope", 's', POPT_ARG_STRING, &scope_string, 0,
+         "Scope of the search in the LDAP tree (sub, one or base)", "s"},
+        {"port", 'p', POPT_ARG_INT, &port, 0,
+         "TCP port to connect to the LDAP server", "p"},
+        POPT_AUTOHELP POPT_TABLEEND
+    };
+    global_options = global_external_options;
+    if (global_options.udp)
+        err_quit("UDP makes no sense for a LDAP connection");
+    ldap_poptcon = poptGetContext(NULL, argc,
+                                  argv, options, POPT_CONTEXT_KEEP_FIRST);
+    while ((value = poptGetNextOpt(ldap_poptcon)) > 0) {
     }
-  if (value < -1)
-    {
-      sprintf (msg, "%s: %s",
-	       poptBadOption (ldap_poptcon, POPT_BADOPTION_NOALIAS),
-	       poptStrerror (value));
-      ldap_usage (msg);
+    if (value < -1) {
+        sprintf(msg, "%s: %s",
+                poptBadOption(ldap_poptcon, POPT_BADOPTION_NOALIAS),
+                poptStrerror(value));
+        ldap_usage(msg);
     }
-  if (port == 0)
-    port = LDAP_PORT;
-  hostname = poptGetArg (ldap_poptcon);
-  rest = poptGetArg (ldap_poptcon);
-  if (rest != NULL)
-    {
-      fprintf (stderr, "%s: ", rest);
-      ldap_usage ("Additional arguments");
+    if (port == 0)
+        port = LDAP_PORT;
+    hostname = poptGetArg(ldap_poptcon);
+    rest = poptGetArg(ldap_poptcon);
+    if (rest != NULL) {
+        fprintf(stderr, "%s: ", rest);
+        ldap_usage("Additional arguments");
     }
-  if (base == NULL)
-    base = "";
-  if (request == NULL || !strcmp (request, ""))
-    request = "(objectclass=*)";
-  if (scope_string != NULL)
-    {
-      scope_string = to_upper (scope_string);
-      if (!strcmp (scope_string, "BASE"))
-	scope = LDAP_SCOPE_BASE;
-      else if (!strcmp (scope_string, "SUB"))
-	scope = LDAP_SCOPE_SUBTREE;
-      else if (!strcmp (scope_string, "ONE"))
-	scope = LDAP_SCOPE_ONELEVEL;
-      else
-	err_quit ("Invalid scope \"%s\"", scope_string);
+    if (base == NULL)
+        base = "";
+    if (request == NULL || !strcmp(request, ""))
+        request = "(objectclass=*)";    /* Default mentioned in OpenLDAP
+                                         * documentation.  Joerg Roth fears that it
+                                         * may trigger "Size limit exceeded" if
+                                         * there are many objects at this node. RFC
+                                         * 4515 seems silent here. */
+    if (scope_string != NULL) {
+        scope_string = (char *) to_upper(scope_string);
+        if (!strcmp(scope_string, "BASE"))
+            scope = LDAP_SCOPE_BASE;
+        else if (!strcmp(scope_string, "SUB"))
+            scope = LDAP_SCOPE_SUBTREE;
+        else if (!strcmp(scope_string, "ONE"))
+            scope = LDAP_SCOPE_ONELEVEL;
+        else
+            err_quit("Invalid scope \"%s\"", scope_string);
     }
-  if (port == LDAP_PORT)
-    {
-      return "ldap";
-    }
-  else
-    {
-      port_text = malloc (99);
-      sprintf (port_text, "%d", port);
-      return port_text;
+    if (port == LDAP_PORT) {
+        return "ldap";
+    } else {
+        port_text = malloc(99);
+        sprintf(port_text, "%d", port);
+        return port_text;
     }
 }
 
 void
-start ()
+start()
 {
-  int result;
-  LDAPMessage *response;
+    int             result;
+    LDAPMessage    *response;
 
-  session = ldap_init (hostname, port);
-  if (session == NULL)
-    err_sys ("Cannot initialize LDAP");
-  /* TODO: allow non-anonymous connections, with ldap_bind_simple_s */
-  /*
-   * Unfortunately, ldap_init does not connect to the LDAP server. So
-   * connection errors (e.g. firewall), will not be detected here and
-   * loop will go on.
-   * 
-   * To quote the man page: ldap_init() acts just like ldap_open(), but
-   * does not open a connection to the LDAP server.  The actual
-   * connection open will occur when the first operation is attempted.
-   * At this time, ldap_init() is preferred.  ldap_open() will be
-   * depreciated in a later release.
-   * 
-   * So, we perform a dummy search immediately.
-   */
-  result = ldap_search_s (session, base, LDAP_SCOPE_ONELEVEL, "(objectclass=*)", NULL,	/* Return all attributes */
-			  1, &response);
-  if (result != 0)
-    {
-      err_quit
-	("Cannot connect to %s (no LDAP server or wrong base, probably): %s",
-	 hostname, ldap_err2string (result));
+    session = ldap_init(hostname, port);
+    if (session == NULL)
+        err_sys("Cannot initialize LDAP");
+    /* TODO: allow non-anonymous connections, with ldap_bind_simple_s */
+    /* 
+     * Unfortunately, ldap_init does not connect to the LDAP server. So
+     * connection errors (e.g. firewall), will not be detected here and
+     * loop will go on.
+     * 
+     * To quote the man page: ldap_init() acts just like ldap_open(), but
+     * does not open a connection to the LDAP server.  The actual
+     * connection open will occur when the first operation is attempted.
+     * At this time, ldap_init() is preferred.  ldap_open() will be
+     * depreciated in a later release.
+     * 
+     * So, we perform a dummy search immediately.
+     *  
+     * See #1879652 for why we use "dummystuff" and not "*"
+     *
+     */
+    result = ldap_search_s(session, base, LDAP_SCOPE_ONELEVEL, "(objectClass=dummystuff)", NULL,        /* Return
+                                                                                                         * * all * 
+                                                                                                         * * *
+                                                                                                         * attributes 
+                                                                                                         */
+                           1, &response);
+    if (result != 0) {
+        err_quit
+            ("Cannot connect to %s (no LDAP server or wrong base, probably): %s",
+             hostname, ldap_err2string(result));
     }
 }
 
 int
-execute ()
+execute()
 {
-  int result;
-  LDAPMessage *response;
-  result = ldap_search_s (session, base, scope, request, NULL,	/* Return all attributes */
-			  0,	/* Return attribute types *and*
-				 * values */
-			  &response);
-  if (result != 0)
-    {
-      err_ret ("Cannot search \"%s\": %s", request, ldap_err2string (result));
-      return -1;
+    int             result;
+    LDAPMessage    *response;
+    result = ldap_search_s(session, base, scope, request, NULL, /* Return all
+                                                                 * attributes */
+                           0,   /* Return attribute types *and* values */
+                           &response);
+    if (result != 0) {
+        err_ret("Cannot search \"%s\": %s", request, ldap_err2string(result));
+        return -1;
     }
-  if (global_options.verbose)
-    printf ("Retrieved: %d entries\n",
-	    ldap_count_entries (session, response));
-  return 0;
+    if (global_options.verbose)
+        printf("Retrieved: %d entries\n", ldap_count_entries(session, response));
+    return 0;
 }
 
 void
-terminate ()
+terminate()
 {
-  ldap_unbind_s (session);
+    ldap_unbind_s(session);
 }

SRC/plugins/postgresql/Makefile.am

@@ -2,9 +2,9 @@ if PGSQLBUILD
 pkglib_LTLIBRARIES = postgresql.la
 postgresql_la_SOURCES = postgresql.c
 postgresql_la_LDFLAGS = -module
-man_MANS = echoping_postgresql.1
 endif
+man_MANS = echoping_postgresql.1
 
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = $(man_MANS) 
 
 # $Id$

SRC/plugins/postgresql/Makefile.in

@@ -1,651 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(postgresql_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../../config.guess \
-	$(srcdir)/../../config.sub $(srcdir)/../../depcomp \
-	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
-	$(srcdir)/../../missing $(srcdir)/../../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../configure-common.ac \
-	$(top_srcdir)/../configure-plugins.ac \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-postgresql_la_LIBADD =
-am__postgresql_la_SOURCES_DIST = postgresql.c
-@PGSQLBUILD_TRUE@am_postgresql_la_OBJECTS = postgresql.lo
-postgresql_la_OBJECTS = $(am_postgresql_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/../../depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/postgresql.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(postgresql_la_SOURCES)
-DIST_SOURCES = $(am__postgresql_la_SOURCES_DIST)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PGSQLBUILD_FALSE = @PGSQLBUILD_FALSE@
-PGSQLBUILD_TRUE = @PGSQLBUILD_TRUE@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-@PGSQLBUILD_TRUE@pkglib_LTLIBRARIES = postgresql.la
-@PGSQLBUILD_TRUE@postgresql_la_SOURCES = postgresql.c
-@PGSQLBUILD_TRUE@postgresql_la_LDFLAGS = -module
-@PGSQLBUILD_TRUE@man_MANS = echoping_postgresql.1
-EXTRA_DIST = $(man_MANS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-postgresql.la: $(postgresql_la_OBJECTS) $(postgresql_la_DEPENDENCIES) 
-	$(LINK) -rpath $(pkglibdir) $(postgresql_la_LDFLAGS) $(postgresql_la_OBJECTS) $(postgresql_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/postgresql.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.. $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-man \
-	uninstall-pkglibLTLIBRARIES
-
-uninstall-man: uninstall-man1
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-man1 install-pkglibLTLIBRARIES \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am uninstall-man uninstall-man1 \
-	uninstall-pkglibLTLIBRARIES
-
-
-# $Id$
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/postgresql/config.h.in

@@ -1,73 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `popt' library (-lpopt). */
-#undef HAVE_LIBPOPT
-
-/* Define to 1 if you have the `pq' library (-lpq). */
-#undef HAVE_LIBPQ
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `poptGetContext' function. */
-#undef HAVE_POPTGETCONTEXT
-
-/* Define to 1 if you have the `PQconnectdb' function. */
-#undef HAVE_PQCONNECTDB
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Internationalized Domain Names support */
-#undef LIBIDN
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define if you need to include postgresql/libpq-fe.h, not just libpq-fe.h */
-#undef POSTGRESQL_PREFIX
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

SRC/plugins/postgresql/echoping_postgresql.1

@@ -33,14 +33,14 @@ echoping_postgresql \- echoping plugin which connects to a PostgreSQL RDBMS serv
 .\" respectively.
 postgresql is an echoping plugin to connect to PostgreSQL RDBMS servers.
 .SH ARGUMENTS
-.B [request]
+.B [SQL-request]
 The request to the PostgreSQL server (in SQL). Only SELECT are
 supported. The default is 'SELECT now()'.
 .TP
 .SH OPTIONS
 .TP
 .B \-c, \-\-conninfo
-Connection information for the Postgresql server. Something like 'host=foo dbname=bar'
+Connection information for the Postgresql server. Something like 'dbname=bar'
 .TP
 .B \-r, \-\-readall
 Read all the data sent by the Postgresql server

SRC/plugins/postgresql/postgresql.c

@@ -16,145 +16,128 @@
 #include <libpq-fe.h>
 #endif
 
-const char *request = NULL;
-int readall = FALSE;
-int connect_each_time = FALSE;
-poptContext postgresql_poptcon;
-PGconn *conn;
-PGresult *res;
-char *conninfo;
+const char     *request = NULL;
+int             readall = FALSE;
+int             connect_each_time = FALSE;
+poptContext     postgresql_poptcon;
+PGconn         *conn;
+PGresult       *res;
+char           *conninfo;
 echoping_options global_options;
 
 void
-postgresql_usage (const char *msg)
+postgresql_usage(const char *msg)
 {
-  if (msg)
-    {
-      printf ("PostgreSQL plugin error: %s\n", msg);
+    if (msg) {
+        printf("PostgreSQL plugin error: %s\n", msg);
     }
-  poptPrintUsage (postgresql_poptcon, stdout, 0);
-  fprintf (stderr, "  [SQL-request]\n");
-  exit (1);
+    poptPrintUsage(postgresql_poptcon, stdout, 0);
+    fprintf(stderr, "  [SQL-request]\n");
+    exit(1);
 }
 
-char *
-init (const int argc, const char **argv,
-      const echoping_options global_external_options)
+char           *
+init(const int argc, const char **argv,
+     const echoping_options global_external_options)
 {
-  int value;
-  char *msg = malloc (256);
-  char *rest;
-  /* popt variables */
-  struct poptOption options[] = {
-    {"conninfo", 'c', POPT_ARG_STRING, &conninfo, 0,
-     "Connection information for the Postgresql server. Something like 'host=foo dbname=bar''",
-     ""},
-    {"readall", 'a', POPT_ARG_NONE, &readall, 0,
-     "Read all the data sent by the Postgresql server",
-     ""},
-    {"connect-each-time", 'e', POPT_ARG_NONE, &connect_each_time, 0,
-     "(Re)Connect to the Postgresql server at each iteration",
-     ""},
-    POPT_AUTOHELP POPT_TABLEEND
-  };
-  global_options = global_external_options;
-  if (global_options.udp)
-    err_quit ("UDP makes no sense for a PostgreSQL connection");
-  postgresql_poptcon = poptGetContext (NULL, argc,
-				       argv, options,
-				       POPT_CONTEXT_POSIXMEHARDER);
-  while ((value = poptGetNextOpt (postgresql_poptcon)) > 0)
-    {
+    int             value;
+    char           *msg = malloc(256);
+    char           *rest;
+    /* popt variables */
+    struct poptOption options[] = {
+        {"conninfo", 'c', POPT_ARG_STRING, &conninfo, 0,
+         "Connection information for the Postgresql server. Something like 'host=foo dbname=bar''",
+         ""},
+        {"readall", 'a', POPT_ARG_NONE, &readall, 0,
+         "Read all the data sent by the Postgresql server",
+         ""},
+        {"connect-each-time", 'e', POPT_ARG_NONE, &connect_each_time, 0,
+         "(Re)Connect to the Postgresql server at each iteration",
+         ""},
+        POPT_AUTOHELP POPT_TABLEEND
+    };
+    global_options = global_external_options;
+    if (global_options.udp)
+        err_quit("UDP makes no sense for a PostgreSQL connection");
+    postgresql_poptcon = poptGetContext(NULL, argc,
+                                        argv, options, POPT_CONTEXT_POSIXMEHARDER);
+    while ((value = poptGetNextOpt(postgresql_poptcon)) > 0) {
     }
-  if (value < -1)
-    {
-      sprintf (msg, "%s: %s",
-	       poptBadOption (postgresql_poptcon, POPT_BADOPTION_NOALIAS),
-	       poptStrerror (value));
-      postgresql_usage (msg);
+    if (value < -1) {
+        sprintf(msg, "%s: %s",
+                poptBadOption(postgresql_poptcon, POPT_BADOPTION_NOALIAS),
+                poptStrerror(value));
+        postgresql_usage(msg);
     }
-  request = poptGetArg (postgresql_poptcon);
-  if (request == NULL)
-    request = "SELECT now()";
-  rest = poptGetArg (postgresql_poptcon);
-  if (rest != NULL)
-    postgresql_usage ("Erroneous additional arguments");
-  if (conninfo == NULL)
-    conninfo = "";
-  return NULL;			/* We only use the conninfo, echoping does not see our hostname or port */
+    request = poptGetArg(postgresql_poptcon);
+    if (request == NULL)
+        request = "SELECT now()";
+    rest = poptGetArg(postgresql_poptcon);
+    if (rest != NULL)
+        postgresql_usage("Erroneous additional arguments");
+    if (conninfo == NULL)
+        conninfo = "";
+    return NULL;                /* We only use the conninfo, echoping does not see
+                                 * our hostname or port */
 }
 
 void
-start_raw ()
+start_raw()
 {
-  if (!connect_each_time)
-    {
-      conn = PQconnectdb (conninfo);
-      if (conn == NULL)
-	{
-	  err_quit ("Cannot create connection\n");
-	}
-      if (PQstatus (conn) == CONNECTION_BAD)
-	{
-	  err_quit ("Connection failed: %s\n", PQerrorMessage (conn));
-	}
+    if (!connect_each_time) {
+        conn = PQconnectdb(conninfo);
+        if (conn == NULL) {
+            err_quit("Cannot create connection\n");
+        }
+        if (PQstatus(conn) == CONNECTION_BAD) {
+            err_quit("Connection failed: %s\n", PQerrorMessage(conn));
+        }
     }
 }
 
 int
-execute ()
+execute()
 {
-  unsigned int row, column;
-  char *result;
-  if (connect_each_time)
-    {
-      conn = PQconnectdb (conninfo);
-      if (conn == NULL)
-	{
-	  err_ret ("Cannot create connection\n");
-	  return -1;
-	}
-      if (PQstatus (conn) == CONNECTION_BAD)
-	{
-	  err_ret ("Connection failed: %s\n", PQerrorMessage (conn));
-	  return -1;
-	}
+    unsigned int    row, column;
+    char           *result;
+    if (connect_each_time) {
+        conn = PQconnectdb(conninfo);
+        if (conn == NULL) {
+            err_ret("Cannot create connection\n");
+            return -1;
+        }
+        if (PQstatus(conn) == CONNECTION_BAD) {
+            err_ret("Connection failed: %s\n", PQerrorMessage(conn));
+            return -1;
+        }
     }
-  res = PQexec (conn, request);
-  if (PQresultStatus (res) != PGRES_TUPLES_OK)
-    {
-      err_ret ("Cannot run \"%s\": %s\n", request,
-	       PQresultErrorMessage (res));
-      return -1;
+    res = PQexec(conn, request);
+    if (PQresultStatus(res) != PGRES_TUPLES_OK) {
+        err_ret("Cannot run \"%s\": %s\n", request, PQresultErrorMessage(res));
+        return -1;
     }
-  if (global_options.verbose)
-    printf ("%d tuples returned\n", PQntuples (res));
-  if (readall)
-    {
-      for (row = 0; row < PQntuples (res); row++)
-	{
-	  for (column = 0; column < PQnfields (res); column++)
-	    {
-	      result = PQgetvalue (res, row, column);
-	      if (result == NULL)
-		{
-		  err_ret ("Cannot retrieve value [%d,%d]\n", row, column);
-		  return -1;
-		}
-	      /* else {
-	         printf ("DEBUG: [%d,%d] %s\n", row, column, result);
-	         } */
-	    }
-	}
+    if (global_options.verbose)
+        printf("%d tuples returned\n", PQntuples(res));
+    if (readall) {
+        for (row = 0; row < PQntuples(res); row++) {
+            for (column = 0; column < PQnfields(res); column++) {
+                result = PQgetvalue(res, row, column);
+                if (result == NULL) {
+                    err_ret("Cannot retrieve value [%d,%d]\n", row, column);
+                    return -1;
+                }
+                /* else { printf ("DEBUG: [%d,%d] %s\n", row, column, result); } */
+            }
+        }
     }
-  if (connect_each_time)
-    PQfinish (conn);
-  return 0;
+    if (connect_each_time)
+        PQfinish(conn);
+    return 0;
 }
 
 void
-terminate ()
+terminate()
 {
-  if (!connect_each_time)
-    PQfinish (conn);
+    if (!connect_each_time)
+        PQfinish(conn);
 }

SRC/plugins/random/Makefile.in

@@ -1,646 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(random_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../../config.guess \
-	$(srcdir)/../../config.sub $(srcdir)/../../depcomp \
-	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
-	$(srcdir)/../../missing $(srcdir)/../../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../configure-common.ac \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-random_la_LIBADD =
-am_random_la_OBJECTS = random.lo
-random_la_OBJECTS = $(am_random_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/../../depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/random.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(random_la_SOURCES)
-DIST_SOURCES = $(random_la_SOURCES)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANDOM_BUILD = @RANDOM_BUILD@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-pkglib_LTLIBRARIES = random.la
-random_la_SOURCES = random.c
-random_la_LDFLAGS = -module
-man_MANS = echoping_random.1
-EXTRA_DIST = $(man_MANS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-random.la: $(random_la_OBJECTS) $(random_la_DEPENDENCIES) 
-	$(LINK) -rpath $(pkglibdir) $(random_la_LDFLAGS) $(random_la_OBJECTS) $(random_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/random.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-man \
-	uninstall-pkglibLTLIBRARIES
-
-uninstall-man: uninstall-man1
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-man1 install-pkglibLTLIBRARIES \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am uninstall-man uninstall-man1 \
-	uninstall-pkglibLTLIBRARIES
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/random/config.h.in

@@ -1,58 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `usleep' function. */
-#undef HAVE_USLEEP
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

SRC/plugins/random/random.c

@@ -9,24 +9,29 @@
 #include <time.h>
 #include <unistd.h>
 
-char *
-init (const int argc, const char *argv[])
+char           *
+init(const int argc, const char *argv[])
 {
-  struct timeval tv;
-  (void) gettimeofday (&tv, (struct timezone *) NULL);
-  srand (tv.tv_usec);
-  return "7"; /* Not used, just to say we use the cooked interface */
+    struct timeval  tv;
+    (void) gettimeofday(&tv, (struct timezone *) NULL);
+    srand(tv.tv_usec);
+    return "7";                 /* Not used, just to say we use the cooked interface 
+                                 */
 }
 
-void start ()
+void
+start()
 {
 }
 
 int
-execute ()
+execute()
 {
-  usleep (rand () % 1000000);
-  return 1;
+    usleep(rand() % 1000000);
+    return 1;
 }
 
-void terminate() {}
+void
+terminate()
+{
+}

SRC/plugins/whois/Makefile.am

@@ -5,4 +5,4 @@ whois_la_SOURCES = whois.c
 whois_la_LDFLAGS = -module
 man_MANS = echoping_whois.1
 
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = $(man_MANS) test.sh

SRC/plugins/whois/Makefile.in

@@ -1,648 +0,0 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-SOURCES = $(whois_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../../config.guess \
-	$(srcdir)/../../config.sub $(srcdir)/../../depcomp \
-	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
-	$(srcdir)/../../missing $(srcdir)/../../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../configure-common.ac \
-	$(top_srcdir)/../configure-plugins.ac \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-whois_la_LIBADD =
-am_whois_la_OBJECTS = whois.lo
-whois_la_OBJECTS = $(am_whois_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/../../depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/whois.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(whois_la_SOURCES)
-DIST_SOURCES = $(whois_la_SOURCES)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-WHOIS_BUILD = @WHOIS_BUILD@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-CONFIGURE_DEPENDENCIES = ../../configure-common.ac ../configure-plugins.ac
-pkglib_LTLIBRARIES = whois.la
-whois_la_SOURCES = whois.c
-whois_la_LDFLAGS = -module
-man_MANS = echoping_whois.1
-EXTRA_DIST = $(man_MANS)
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)"
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-whois.la: $(whois_la_OBJECTS) $(whois_la_DEPENDENCIES) 
-	$(LINK) -rpath $(pkglibdir) $(whois_la_LDFLAGS) $(whois_la_OBJECTS) $(whois_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/whois.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.. $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-man \
-	uninstall-pkglibLTLIBRARIES
-
-uninstall-man: uninstall-man1
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-man1 install-pkglibLTLIBRARIES \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am uninstall-man uninstall-man1 \
-	uninstall-pkglibLTLIBRARIES
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

SRC/plugins/whois/config.h.in

@@ -1,64 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `popt' library (-lpopt). */
-#undef HAVE_LIBPOPT
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `poptGetContext' function. */
-#undef HAVE_POPTGETCONTEXT
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Internationalized Domain Names support */
-#undef LIBIDN
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

SRC/plugins/whois/echoping_whois.1

@@ -22,8 +22,8 @@ echoping_whois \- echoping plugin which connects to a whois server
 .RI [echoping\ options]
 .RI -m\ whois
 .B hostname
-.RI -r\ request
-.RI -d
+.RI [-d]
+.RI request
 .SH DESCRIPTION
 .PP
 .\" TeX users may be more comfortable with the \fB<whatever>\fP and
@@ -31,10 +31,11 @@ echoping_whois \- echoping plugin which connects to a whois server
 .\" respectively.
 whois is an echoping plugin to connect to whois/nicname servers (see
 RFC 3912).
-.SH OPTIONS
+.SH ARGUMENTS
 .TP
-.B \-r, \-\-request
+.B request
 The request to the whois server (typically a domain name)
+.SH OPTIONS
 .TP
 .B \-d, \-\-dump
 Dumps the result of the request

SRC/plugins/whois/whois.c

@@ -14,106 +14,119 @@
 #define MAX_REQUEST 256
 
 struct addrinfo whois_server;
-char *hostname;
-const char *request = NULL;
-int dump = FALSE;
-int n;
-int sockfd;
-FILE *files = NULL;
-poptContext whois_poptcon;
+char           *hostname;
+const char     *request = NULL;
+int             dump = FALSE;
+int             n;
+int             sockfd;
+FILE           *files = NULL;
+poptContext     whois_poptcon;
+echoping_options general_options;
 
 void
-whois_usage (const char *msg)
+whois_usage(const char *msg)
 {
-  if (msg)
-    {
-      printf ("Error: %s\n", msg);
+    if (msg) {
+        printf("Error: %s\n", msg);
     }
-  poptPrintUsage (whois_poptcon, stdout, 0);
-  fprintf (stderr, "  request\n");
-  exit (1);
+    poptPrintUsage(whois_poptcon, stdout, 0);
+    fprintf(stderr, "  request\n");
+    exit(1);
 }
 
-char *
-init (const int argc, const char **argv, echoping_options global_options)
+char           *
+init(const int argc, const char **argv, echoping_options global_options)
 {
-  int value;
-  char *msg = malloc (256);
-  char *rest;
-  /* popt variables */
-  struct poptOption options[] = {
-    {"dump", 'd', POPT_ARG_NONE, &dump, 'd',
-     "Dumps the reply from the whois server",
-     ""},
-    POPT_AUTOHELP POPT_TABLEEND
-  };
-  if (global_options.udp)
-    err_quit ("UDP is incompatible with this whois plugin");
-  /* Will probably be catched before because /etc/services have no entry for UDP port 43 */
-  whois_poptcon = poptGetContext (NULL, argc,
-				  argv, options, POPT_CONTEXT_POSIXMEHARDER);
-  while ((value = poptGetNextOpt (whois_poptcon)) > 0)
-    {
-      switch ((char) value)
-	{
-	case 'd':
-	  break;
-	default:
-	  sprintf (msg, "Wrong option %d (%c)", value, (char) value);
-	  whois_usage (msg);
-	}
+    int             value;
+    char           *msg = malloc(256);
+    char           *rest;
+    /* popt variables */
+    struct poptOption options[] = {
+        {"dump", 'd', POPT_ARG_NONE, &dump, 'd',
+         "Dumps the reply from the whois server",
+         ""},
+        POPT_AUTOHELP POPT_TABLEEND
+    };
+    general_options = global_options;
+    if (global_options.udp)
+        err_quit("UDP is incompatible with this whois plugin");
+    /* Will probably be catched before because /etc/services have no entry for UDP
+     * port 43 */
+    whois_poptcon = poptGetContext(NULL, argc,
+                                   argv, options, POPT_CONTEXT_POSIXMEHARDER);
+    while ((value = poptGetNextOpt(whois_poptcon)) > 0) {
+        switch ((char) value) {
+        case 'd':
+            break;
+        default:
+            sprintf(msg, "Wrong option %d (%c)", value, (char) value);
+            whois_usage(msg);
+        }
     }
-  if (value < -1)
-    {
-      sprintf (msg, "%s: %s",
-	       poptBadOption (whois_poptcon, POPT_BADOPTION_NOALIAS),
-	       poptStrerror (value));
-      whois_usage (msg);
+    if (value < -1) {
+        sprintf(msg, "%s: %s",
+                poptBadOption(whois_poptcon, POPT_BADOPTION_NOALIAS),
+                poptStrerror(value));
+        whois_usage(msg);
     }
-  request = (char *) poptGetArg (whois_poptcon);
-  if (request == NULL)
-    whois_usage ("Mandatory request missing");
-  rest = (char *) poptGetArg (whois_poptcon);
-  if (rest != NULL && strcmp (rest, ""))
-    whois_usage ("Extraneous arguments ignored");
-  return "nicname";
+    request = (char *) poptGetArg(whois_poptcon);
+    if (request == NULL)
+        whois_usage("Mandatory request missing");
+    rest = (char *) poptGetArg(whois_poptcon);
+    if (rest != NULL && strcmp(rest, ""))
+        whois_usage("Extraneous arguments ignored");
+    return "nicname";
 }
 
 void
-start (struct addrinfo *res)
+start(struct addrinfo *res)
 {
-  whois_server = *res;
+    whois_server = *res;
 }
 
 int
-execute ()
+execute()
 {
-  int nr = 0;
-  char recvline[MAX_LINE + 1];
-  char complete_request[MAX_REQUEST];
-  if ((sockfd =
-       socket (whois_server.ai_family, whois_server.ai_socktype,
-	       whois_server.ai_protocol)) < 0)
-    err_sys ("Can't open socket");
-  if (connect (sockfd, whois_server.ai_addr, whois_server.ai_addrlen) < 0)
-    err_sys ("Can't connect to server");
-  if ((files = fdopen (sockfd, "r")) == NULL)
-    err_sys ("Cannot fdopen");
-  sprintf (complete_request, "%s\r\n", request);
-  n = strlen (complete_request);
-  if (writen (sockfd, complete_request, n) != n)
-    err_sys ("writen error on socket");
-  /* Read from the server */
-  while ((nr = readline (files, recvline, MAX_LINE, 0)) > 0)
+    int             nr = 0;
+    char            recvline[MAX_LINE + 1];
+    char            complete_request[MAX_REQUEST];
+#ifdef HAVE_TCP_INFO
+    struct tcp_info tcpinfo;
+    socklen_t       socket_length = sizeof(tcpinfo);
+#endif
+    if ((sockfd =
+         socket(whois_server.ai_family, whois_server.ai_socktype,
+                whois_server.ai_protocol)) < 0)
+        err_sys("Can't open socket");
+    if (connect(sockfd, whois_server.ai_addr, whois_server.ai_addrlen) < 0)
+        err_sys("Can't connect to server");
+    if ((files = fdopen(sockfd, "r")) == NULL)
+        err_sys("Cannot fdopen");
+    sprintf(complete_request, "%s\r\n", request);
+    n = strlen(complete_request);
+    if (writen(sockfd, complete_request, n) != n)
+        err_sys("writen error on socket");
+    /* Read from the server */
+    while ((nr = readline(files, recvline, MAX_LINE, 0)) > 0)
+        if (dump)
+            printf("%s", recvline);
     if (dump)
-      printf ("%s", recvline);
-  if (dump)
-    printf ("\n");
-  close (sockfd);
-  return 1;
+        printf("\n");
+#ifdef HAVE_TCP_INFO
+    /* Thanks to Perry Lorier <perry@coders.net> for the tip */
+    if (general_options.verbose) {
+        if (getsockopt(sockfd, SOL_TCP, TCP_INFO, &tcpinfo, &socket_length)
+            != -1) {
+            printf("Estimated TCP RTT: %.04f seconds\n",
+                   tcpinfo.tcpi_rtt / 1000000.0);
+        }
+    }
+#endif
+    close(sockfd);
+    return 1;
 }
 
 void
-terminate ()
+terminate()
 {
 }

SRC/readline.c

@@ -8,219 +8,183 @@
 #include "echoping.h"
 
 int
-readline (fs, ptr, maxlen, ln)
-     FILE *fs;
-     char *ptr;
-     int maxlen;
-     unsigned short ln;
+readline(fs, ptr, maxlen, ln)
+    FILE           *fs;
+    char           *ptr;
+    int             maxlen;
+    unsigned short  ln;
 {
-  int n = 1;
-  char *rc;
-  int r;
+    int             n = 1;
+    char           *rc;
+    int             r;
 
-  /* Reading with fgets or fread instead of read
-     one-character-at-a-time is more than ten times faster, on a local
-     server. */
-  if (ln)
-    {
-      rc = fgets (ptr, maxlen + 1, fs);
-      if (rc == NULL)
-	{
-	  if (timeout_flag)
-	    return n;
-	  return (-1);
-	}
-      n = strlen (rc);
-      return n;
+    /* Reading with fgets or fread instead of read one-character-at-a-time is more
+     * than ten times faster, on a local server. */
+    if (ln) {
+        rc = fgets(ptr, maxlen + 1, fs);
+        if (rc == NULL) {
+            if (timeout_flag)
+                return n;
+            return (-1);
+        }
+        n = strlen(rc);
+        return n;
+    } else {
+        while (n < maxlen) {
+            r = fread(ptr, 1, maxlen, fs);
+            if (timeout_flag)
+                return r;
+            if (r == 0) {
+                if (n == 1)
+                    return (0); /* EOF, no data read */
+                else
+                    break;      /* EOF, some data was read */
+            }
+            n = n + r;
+        }
     }
-  else
-    {
-      while (n < maxlen)
-	{
-	  r = fread (ptr, 1, maxlen, fs);
-	  if (timeout_flag)
-	    return r;
-	  if (r == 0)
-	    {
-	      if (n == 1)
-		return (0);	/* EOF, no data read */
-	      else
-		break;		/* EOF, some data was read */
-	    }
-	  n = n + r;
-	}
-    }
-  return (n);
+    return (n);
 }
 
 #ifdef OPENSSL
 
-char SSL_buffer[MAXTOREAD];
-int buf_ptr;
-int buf_end;
+char            SSL_buffer[MAXTOREAD];
+int             buf_ptr;
+int             buf_end;
 
 int
-SSL_readline (sslh, ptr, maxlen, ln)
-     SSL *sslh;
-     char *ptr;
-     int maxlen;
-     unsigned short ln;
+SSL_readline(sslh, ptr, maxlen, ln)
+    SSL            *sslh;
+    char           *ptr;
+    int             maxlen;
+    unsigned short  ln;
 {
-  int rc = 0;
-  int n = 0;
-  int i, oi;
-  if (ln)
-    {
-      /* Empty buffer */
-      if (buf_end == 0)
-	{
-	  rc = SSL_read (sslh, SSL_buffer, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = rc;
-	  buf_ptr = 0;
-	}
-      /* No more data in the buffer */
-      else if (buf_ptr == buf_end)
-	{
-	  buf_ptr = 0;
-	  rc = SSL_read (sslh, SSL_buffer, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = rc;
-	}
-      else if (SSL_buffer[buf_end] != '\n')
-	{
-	  /* We have a probleme here is the first SSL_read sent back
-	     a text not finished by a \n. See www.SSL.de for an
-	     example. We get more data. See bug #230384 */
-	  rc = SSL_read (sslh, SSL_buffer + buf_end, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = buf_end + rc;
-	}
-      for (oi = buf_ptr, i = buf_ptr;
-	   i <= buf_end && SSL_buffer[i] != '\n'; i++)
-	{
-	  *ptr++ = SSL_buffer[i];
-	  buf_ptr++;
-	}
-      if (SSL_buffer[i] == '\n')
-	buf_ptr++;
-      *ptr = '\0';
-      /* if (ln)
-         printf ("SSL_readline returns %d (%s)\n", i - oi, SSL_buffer); */
-      return (i - oi);
-    }
-  else
-    {
-      /* OpenSSL reads at most 4096 characters */
-      rc = 1;			/* Just to avoid exiting too soon */
-      while (n < maxlen && rc != 0)
-	{
-	  if ((buf_end == 0) || (buf_ptr > buf_end))
-	    {
-	      rc = SSL_read (sslh, ptr, maxlen);
-	      buf_end = 0;
-	      buf_ptr = 0;
-	    }
-	  else
-	    {
-	      for (i = buf_ptr; i < maxlen && i <= buf_end; i++)
-		{
-		  *ptr++ = SSL_buffer[i];
-		  rc++;
-		}
-	      buf_ptr = i;
-	    }
-	  n = n + rc;
-	}
-      return n;
+    int             rc = 0;
+    int             n = 0;
+    int             i, oi;
+    if (ln) {
+        /* Empty buffer */
+        if (buf_end == 0) {
+            rc = SSL_read(sslh, SSL_buffer, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = rc;
+            buf_ptr = 0;
+        }
+        /* No more data in the buffer */
+        else if (buf_ptr == buf_end) {
+            buf_ptr = 0;
+            rc = SSL_read(sslh, SSL_buffer, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = rc;
+        } else if (SSL_buffer[buf_end] != '\n') {
+            /* We have a probleme here is the first SSL_read sent back a text not
+             * finished by a \n. See www.SSL.de for an example. We get more data.
+             * See bug #230384 */
+            rc = SSL_read(sslh, SSL_buffer + buf_end, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = buf_end + rc;
+        }
+        for (oi = buf_ptr, i = buf_ptr; i <= buf_end && SSL_buffer[i] != '\n'; i++) {
+            *ptr++ = SSL_buffer[i];
+            buf_ptr++;
+        }
+        if (SSL_buffer[i] == '\n')
+            buf_ptr++;
+        *ptr = '\0';
+        /* if (ln) printf ("SSL_readline returns %d (%s)\n", i - oi, SSL_buffer); */
+        return (i - oi);
+    } else {
+        /* OpenSSL reads at most 4096 characters */
+        rc = 1;                 /* Just to avoid exiting too soon */
+        while (n < maxlen && rc != 0) {
+            if ((buf_end == 0) || (buf_ptr > buf_end)) {
+                rc = SSL_read(sslh, ptr, maxlen);
+                buf_end = 0;
+                buf_ptr = 0;
+            } else {
+                for (i = buf_ptr; i < maxlen && i <= buf_end; i++) {
+                    *ptr++ = SSL_buffer[i];
+                    rc++;
+                }
+                buf_ptr = i;
+            }
+            n = n + rc;
+        }
+        return n;
     }
 }
 #endif
 
 #ifdef GNUTLS
 
-char TLS_buffer[MAXTOREAD];
-int buf_ptr;
-int buf_end;
+char            TLS_buffer[MAXTOREAD];
+int             buf_ptr;
+int             buf_end;
 
 int
-TLS_readline (session, ptr, maxlen, ln)
-     gnutls_session session;
-     char *ptr;
-     int maxlen;
-     unsigned short ln;
+TLS_readline(session, ptr, maxlen, ln)
+    gnutls_session  session;
+    char           *ptr;
+    int             maxlen;
+    unsigned short  ln;
 {
-  int rc = 0;
-  int n = 0;
-  int i, oi;
-  if (ln)
-    {
-      /* Empty buffer */
-      if (buf_end == 0)
-	{
-	  rc = gnutls_record_recv (session, TLS_buffer, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = rc;
-	  buf_ptr = 0;
-	}
-      /* No more data in the buffer */
-      else if (buf_ptr == buf_end)
-	{
-	  buf_ptr = 0;
-	  rc = gnutls_record_recv (session, TLS_buffer, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = rc;
-	}
-      else if (TLS_buffer[buf_end] != '\n')
-	{
-	  rc = gnutls_record_recv (session, TLS_buffer + buf_end, maxlen);
-	  if (rc == -1)
-	    return rc;
-	  buf_end = buf_end + rc;
-	}
-      for (oi = buf_ptr, i = buf_ptr;
-	   i <= buf_end && TLS_buffer[i] != '\n'; i++)
-	{
-	  *ptr++ = TLS_buffer[i];
-	  buf_ptr++;
-	}
-      if (TLS_buffer[i] == '\n')
-	buf_ptr++;
-      *ptr = '\0';
-      /* printf ("DEBUG: TLS_readline returns %d (%s)\n", i - oi, TLS_buffer); */
-      return (i - oi);
-    }
-  else
-    {
-      rc = 1;			/* Just to avoid exiting too soon */
-      while (n < maxlen && rc > 0)
-	{
-	  if ((buf_end == 0) || (buf_ptr > buf_end))
-	    {
-	      rc = gnutls_record_recv (session, ptr, maxlen);
-	      buf_end = 0;
-	      buf_ptr = 0;
-	    }
-	  else
-	    {
-	      for (i = buf_ptr; i < maxlen && i <= buf_end; i++)
-		{
-		  *ptr++ = TLS_buffer[i];
-		  rc++;
-		  /* printf ("DEBUG: Now %d chars read\n", rc); */
-		}
-	      buf_ptr = i;
-	    }
-	  if (rc > 0)
-	    n = n + rc;
-	  /* printf ("DEBUG: Now %d chars to send\n", n); */
-	}
-      return n;
+    int             rc = 0;
+    int             n = 0;
+    int             i, oi;
+    if (ln) {
+        /* Empty buffer */
+        if (buf_end == 0) {
+            rc = gnutls_record_recv(session, TLS_buffer, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = rc;
+            buf_ptr = 0;
+        }
+        /* No more data in the buffer */
+        else if (buf_ptr == buf_end) {
+            buf_ptr = 0;
+            rc = gnutls_record_recv(session, TLS_buffer, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = rc;
+        } else if (TLS_buffer[buf_end] != '\n') {
+            rc = gnutls_record_recv(session, TLS_buffer + buf_end, maxlen);
+            if (rc == -1)
+                return rc;
+            buf_end = buf_end + rc;
+        }
+        for (oi = buf_ptr, i = buf_ptr; i <= buf_end && TLS_buffer[i] != '\n'; i++) {
+            *ptr++ = TLS_buffer[i];
+            buf_ptr++;
+        }
+        if (TLS_buffer[i] == '\n')
+            buf_ptr++;
+        *ptr = '\0';
+        /* printf ("DEBUG: TLS_readline returns %d (%s)\n", i - oi, TLS_buffer); */
+        return (i - oi);
+    } else {
+        rc = 1;                 /* Just to avoid exiting too soon */
+        while (n < maxlen && rc > 0) {
+            if ((buf_end == 0) || (buf_ptr > buf_end)) {
+                rc = gnutls_record_recv(session, ptr, maxlen);
+                buf_end = 0;
+                buf_ptr = 0;
+            } else {
+                for (i = buf_ptr; i < maxlen && i <= buf_end; i++) {
+                    *ptr++ = TLS_buffer[i];
+                    rc++;
+                    /* printf ("DEBUG: Now %d chars read\n", rc); */
+                }
+                buf_ptr = i;
+            }
+            if (rc > 0)
+                n = n + rc;
+            /* printf ("DEBUG: Now %d chars to send\n", n); */
+        }
+        return n;
     }
 }
 #endif

SRC/recreate-autofiles

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+# For developers only: use it only if you know about autotools. 
+
+set -e
+
+# Does *not* work with automake 1.4!
+aclocal
+autoheader
+libtoolize --force
+automake --add-missing 
+autoconf
+cd plugins
+aclocal
+automake --foreign --add-missing
+autoconf
+for dir in dns random whois ldap postgresql; do
+   cd $dir
+   aclocal
+   autoheader
+   automake --foreign --add-missing
+   autoconf
+   cd ..
+done
+cd ..

SRC/smtp.c

@@ -8,31 +8,27 @@
 
 #ifdef SMTP
 
-char big_recvline[MAXTOREAD];
+char            big_recvline[MAXTOREAD];
 
 int
-smtp_read_response_from_server (FILE *fs)
+smtp_read_response_from_server(FILE * fs)
 {
-  int nr;
-  int i;
+    int             nr;
+    int             i;
 
-  for (i = 0; i < MAXSMTPLINES; i++)
-    {
-      nr = readline (fs, big_recvline, MAXTOREAD, TRUE);
-      if (nr <= 4)
-	{
-	  return -1;
-	}
-      if (big_recvline[3] == ' ')
-	{
-	  return nr;
-	}
-      if (big_recvline[3] != '-')
-	{
-	  return -1;
-	}
+    for (i = 0; i < MAXSMTPLINES; i++) {
+        nr = readline(fs, big_recvline, MAXTOREAD, TRUE);
+        if (nr <= 4) {
+            return -1;
+        }
+        if (big_recvline[3] == ' ') {
+            return nr;
+        }
+        if (big_recvline[3] != '-') {
+            return -1;
+        }
     }
-  return -1;
+    return -1;
 }
 
-#endif /* SMTP */
+#endif                          /* SMTP */

SRC/test-echoping-crypto

@@ -11,11 +11,8 @@ echo " echoping's fault: it may be a network problem."
 echo ""
 
 # We need to iterate to catch some SSL programming errors. See bug #130151 
-./echoping -C -h / -n 2 www.modssl.org
-
-echo ""
-
-./echoping -C -h / -n 2 www.creditmutuel.fr
+#./echoping -C -h / -n 2 www.modssl.org
+./echoping -C -h / -n 2 www.verisign.com
 
 echo ""
 

SRC/test-echoping-ipv6

@@ -6,11 +6,11 @@ echo ""
 echo "Since this tests tries remote servers, a failure is not always "
 echo " echoping's fault: it may be a network problem."
 
-./echoping -6 -h / -v www.6bone.net
+./echoping -6 -h / -v www.ripe.net
 
-./echoping -6 -h / -v ns3.nic.fr
+./echoping -6 -h / -v www.afnic.fr
 
-./echoping -6 -v -h / "[3ffe:b00:c18:1::10]:80" # RFC 2732
+./echoping -6 -v -R -h / "[2001:4f8:0:2::d]:80" # RFC 3986, section 3.2.2
 
 # We force the use of IPv6 with -6 because some libc (Solaris) are
 # smart enough to send only the IPv4 adresses to the application if

SRC/test-echoping-proxy

@@ -13,11 +13,11 @@ fi
 
 ./echoping -h http://www.netaktiv.com/ cache:$PROXY_PORT
 
-./echoping -h http://www.freenix.org/ cache:$PROXY_PORT
+./echoping -h http://www.debian.org/ cache:$PROXY_PORT
 
-./echoping -a -h http://www.freenix.org/ cache:$PROXY_PORT
+./echoping -a -h http://www.debian.org/ cache:$PROXY_PORT
 
-./echoping -A -h http://www.freenix.org/ cache:$PROXY_PORT
+./echoping -A -h http://www.debian.org/ cache:$PROXY_PORT
 
 
 

SRC/test-echoping-remote

@@ -6,10 +6,11 @@ echo ""
 echo "Since this tests tries remote servers, a failure is not always "
 echo " echoping's fault: it may be a network problem."
 
-./echoping central.internatif.org
+# There are no more public echo servers :-(
+#./echoping echo.example.org
 
 ./echoping -h / www.debian.org
 
-./echoping -h / www.freenix.org
+./echoping -h / www.afnic.fr
 
 ./echoping -S mx3.hotmail.com

SRC/test-echoping-tos

@@ -7,10 +7,11 @@ echo "Since this tests tries remote servers, a failure is not always "
 echo " echoping's fault: it may be a network problem."
 echo "On some systems, you may NEED to be root."
 
-./echoping -P 0xa0 central.internatif.org
+# Raise the precedence to "critic" (RFC 791, section 3.1)
+./echoping -P 0xa0 -h / www.gullitv.fr
 
 # IPTOS_THROUGHPUT  
-./echoping -P 0x08 central.internatif.org
+./echoping -P 0x08 -h / www.gullitv.fr
 
 
 

SRC/util.c

@@ -9,44 +9,43 @@
 #include <time.h>
 #include <ctype.h>
 
-char *
-random_string (unsigned length)
+char           *
+random_string(unsigned length)
 {
 
-  char *state = (char *) malloc (sizeof (char) * STATES);
-  char *result = (char *) malloc (length + 1);
-  int i, number;
-  unsigned seed = (unsigned) time ((time_t *) NULL);
+    char           *state = (char *) malloc(sizeof(char) * STATES);
+    char           *result = (char *) malloc(length + 1);
+    int             i, number;
+    unsigned        seed = (unsigned) time((time_t *) NULL);
 
-  /* printf ("Seed is %u\n", seed); */
+    /* printf ("Seed is %u\n", seed); */
 
-  /* Initialize random generator */
-  (void) initstate (seed, state, STATES);
+    /* Initialize random generator */
+    (void) initstate(seed, state, STATES);
 
-  for (i = 0; i < length; i++)
-    {
-      number = (random () % 94) + 33;
-      /* printf ("Number for %d is %d\n", i, number); */
-      result[i] = (char) number;
+    for (i = 0; i < length; i++) {
+        number = (random() % 94) + 33;
+        /* printf ("Number for %d is %d\n", i, number); */
+        result[i] = (char) number;
     }
-  result[length] = '\0';
+    result[length] = '\0';
 
-  /* printf ("Result is %s\n", result); */
+    /* printf ("Result is %s\n", result); */
 
-  return result;
+    return result;
 
 }
 
-char *
-to_upper (char *input)
+char           *
+to_upper(char *input)
 {
-  int c;
-  char *result;
-  result = (char *) malloc (strlen (input));
-  for (c = 0; c < strlen (input); c++)
-    result[c] = toupper (input[c]);
-  result[strlen (input)] = '\0';
-  return result;
+    int             c;
+    char           *result;
+    result = (char *) malloc(strlen(input));
+    for (c = 0; c < strlen(input); c++)
+        result[c] = toupper((int) input[c]);
+    result[strlen(input)] = '\0';
+    return result;
 }
 
 /*
@@ -54,155 +53,209 @@ to_upper (char *input)
  * >= in. Comes from the bing program. 
  */
 void
-tvsub (out, in)
-     struct timeval *out, *in;
+tvsub(out, in)
+    struct timeval *out, *in;
 {
-  if ((out->tv_usec -= in->tv_usec) < 0)
-    {
-      --out->tv_sec;
-      out->tv_usec += 1000000;
+    if ((out->tv_usec -= in->tv_usec) < 0) {
+        --out->tv_sec;
+        out->tv_usec += 1000000;
     }
-  out->tv_sec -= in->tv_sec;
+    out->tv_sec -= in->tv_sec;
 }
 
 /* tvadd -- Adds 2 timeval structs:  out = out + in. */
 void
-tvadd (out, in)
-     struct timeval *out, *in;
+tvadd(out, in)
+    struct timeval *out, *in;
 {
-  if ((out->tv_usec += in->tv_usec) >= 1000000)
-    {
-      ++out->tv_sec;
-      out->tv_usec -= 1000000;
+    if ((out->tv_usec += in->tv_usec) >= 1000000) {
+        ++out->tv_sec;
+        out->tv_usec -= 1000000;
     }
-  out->tv_sec += in->tv_sec;
+    out->tv_sec += in->tv_sec;
 }
 
 /* tvavg -- Averages a timeval struct */
 void
-tvavg (out, number)
-     struct timeval *out;
-     int number;
+tvavg(out, number)
+    struct timeval *out;
+    int             number;
 {
-  double result;
-  /*
-   * out->tv_sec = out->tv_sec/number; out->tv_usec =
-   * out->tv_usec/number; 
-   */
-  result = (1000000 * out->tv_sec + out->tv_usec) / number;
-  /* printf ("Result of average is %f\n", result) */ ;
-  out->tv_sec = (long) (result / 1000000);
-  out->tv_usec = (long) (result - (out->tv_sec * 1000000));
+    double          result;
+    /* 
+     * out->tv_sec = out->tv_sec/number; out->tv_usec =
+     * out->tv_usec/number; 
+     */
+    result = (1000000 * out->tv_sec + out->tv_usec) / number;
+    /* printf ("Result of average is %f\n", result) */ ;
+    out->tv_sec = (long) (result / 1000000);
+    out->tv_usec = (long) (result - (out->tv_sec * 1000000));
 }
 
 /* tvstddev -- Computes the standard deviation of a set of results */
 void
-tvstddev (out, number, average, results)
-     struct timeval *out;
-     int number;
-     struct timeval average;
-     struct result *results;
+tvstddev(out, number, average, results)
+    struct timeval *out;
+    int             number;
+    struct timeval  average;
+    struct result  *results;
 {
-  int i;
-  struct timeval result, avg, var = null_timeval;
-  struct timeval square, large, small;
-  *out = null_timeval;
-  for (i = 0; i < number; i++)
-    {
-      if (results[i].valid == 1)
-	{
-	  result = results[i].timevalue;
-	  /* printf ("value is %f (average is %f)\n", 
-	     tv2double (result), tv2double (average)); */
-	  avg = average;
-	  if (tvcmp (&result, &avg) == -1)
-	    {
-	      small = result;
-	      large = avg;
-	    }
-	  else
-	    {
-	      large = result;
-	      small = avg;
-	    }
-	  tvsub (&large, &small);
-	  /* printf ("abs offset is %f\n", tv2double (large)); */
-	  square = double2tv (pow (tv2double (large), 2));
-	  tvadd (&var, &square);
-	  /* printf ("variance is now %f\n", tv2double (var)); */
-	}
+    int             i;
+    struct timeval  result = null_timeval;
+    struct timeval  avg = null_timeval;
+#ifdef DEBUG
+    struct timeval  var = null_timeval;
+#endif
+    struct timeval  large, small;
+    double          d_offset, d_square, d_variance = 0;
+    *out = null_timeval;
+    for (i = 0; i < number; i++) {
+        if (results[i].valid == 1) {
+            result = results[i].timevalue;
+#ifdef DEBUG
+            printf("DEBUG: Value is %f (average is %f)\n", tv2double
+                   (result), tv2double(average));
+#endif
+            avg = average;
+            if (tvcmp(&result, &avg) == -1) {
+                small = result;
+                large = avg;
+            } else {
+                large = result;
+                small = avg;
+            }
+            tvsub(&large, &small);
+#ifdef DEBUG
+            printf("abs offset is %f\n", tv2double(large));
+#endif
+            d_offset = tv2double(large);
+            d_square = d_offset * d_offset;
+            d_variance += d_square;
+#ifdef DEBUG
+            printf("variance is now %f\n", tv2double(var));
+#endif
+        }
     }
-  result = double2tv (sqrt (tv2double (var) / number));
-  out->tv_sec = result.tv_sec;
-  out->tv_usec = result.tv_usec;
+    result = double2tv(sqrt(d_variance / (double) number));
+    out->tv_sec = result.tv_sec;
+    out->tv_usec = result.tv_usec;
+}
+
+
+ /* tvstddevavg -- Computes the average of values within a set of results where the
+  * sample is within the given number of standard deviations from the average */
+/* TODO: IWBN to return the number of excluded outliers */
+void
+tvstddevavg(out, number, average, results, n_stddev)
+    struct timeval *out;        /* contains std dev on entry */
+    int             number;
+    struct timeval  average;
+    struct result  *results;
+    double          n_stddev;
+{
+    int             i, valid = 0;
+    struct timeval  result;     /* working value */
+    struct timeval  var = null_timeval; /* result accumulator */
+    double          x;
+    double          maxdev = tv2double(*out) * n_stddev;
+
+    if (tvcmp(out, &null_timeval) == 0) {
+        /* if the SD is 0 then we just return the average */
+        *out = average;
+        return;
+    }
+
+    for (i = 0; i < number; i++) {
+        if (results[i].valid == 1) {
+            result = results[i].timevalue;
+            tvsub(&result, &average);
+            /* printf ("value is %f (stddev is %f)\n", tv2double (result), tv2double 
+             * (stddev)); */
+            /* ensure that result (difference to average) is absolute value */
+            if (tvcmp(&result, &null_timeval) == -1) {
+                result = average;
+                tvsub(&result, &results[i].timevalue);
+            }
+            x = tv2double(result);
+            /* printf("value is %g maxdev %g\n",x,maxdev); */
+            if (x <= maxdev) {
+                /* deviation is less than stddev */
+                tvadd(&var, &results[i].timevalue);
+                valid++;
+            } else {
+                /* printf("dropped\n"); */
+            }
+        }
+    }
+    /* printf ("total is %f in %d samples\n", tv2double (var), valid); */
+    if (valid > 0) {
+        *out = double2tv(tv2double(var) / valid);
+    } else {
+        *out = null_timeval;
+    }
+
 }
 
 /* tvcmp -- Compares two timeval structs */
 int
-tvcmp (left, right)
-     struct timeval *left, *right;
+tvcmp(left, right)
+    struct timeval *left, *right;
 {
-  if (left->tv_sec < right->tv_sec)
-    {
-      return -1;
+    if (left->tv_sec < right->tv_sec) {
+        return -1;
     }
-  if (left->tv_sec > right->tv_sec)
-    {
-      return 1;
+    if (left->tv_sec > right->tv_sec) {
+        return 1;
     }
-  if (left->tv_usec < right->tv_usec)
-    {
-      return -1;
+    if (left->tv_usec < right->tv_usec) {
+        return -1;
     }
-  if (left->tv_usec > right->tv_usec)
-    {
-      return 1;
+    if (left->tv_usec > right->tv_usec) {
+        return 1;
     }
-  return 0;
+    return 0;
 
 }
 
 /* tvmin */
 void
-tvmin (champion, challenger)
-     struct timeval *champion, *challenger;
+tvmin(champion, challenger)
+    struct timeval *champion, *challenger;
 {
-  if (tvcmp (champion, challenger) == 1)
-    {
-      champion->tv_sec = challenger->tv_sec;
-      champion->tv_usec = challenger->tv_usec;
+    if (tvcmp(champion, challenger) == 1) {
+        champion->tv_sec = challenger->tv_sec;
+        champion->tv_usec = challenger->tv_usec;
     }
 }
 
 /* tvmax */
 void
-tvmax (champion, challenger)
-     struct timeval *champion, *challenger;
+tvmax(champion, challenger)
+    struct timeval *champion, *challenger;
 {
-  if (tvcmp (champion, challenger) == -1)
-    {
-      champion->tv_sec = challenger->tv_sec;
-      champion->tv_usec = challenger->tv_usec;
+    if (tvcmp(champion, challenger) == -1) {
+        champion->tv_sec = challenger->tv_sec;
+        champion->tv_usec = challenger->tv_usec;
     }
 }
 
 double
-tv2double (tv)
-     struct timeval tv;
+tv2double(tv)
+    struct timeval  tv;
 {
-  double result;
-  result =
-    (((((double) tv.tv_sec) * 1000000.0) + (double) tv.tv_usec) / 1000000.0);
-  /* printf ("Double is %9.3f\n", result); */
-  return result;
+    double          result;
+    result =
+        (((((double) tv.tv_sec) * 1000000.0) + (double) tv.tv_usec) / 1000000.0);
+    /* printf ("Double is %9.3f\n", result); */
+    return result;
 }
 
 struct timeval
-double2tv (x)
-     double x;
+double2tv(x)
+    double          x;
 {
-  struct timeval result;
-  result.tv_sec = (int) (x);
-  result.tv_usec = (int) ((x - result.tv_sec) * 1000000);
-  return result;
+    struct timeval  result;
+    result.tv_sec = (int) (x);
+    result.tv_usec = (int) ((x - result.tv_sec) * 1000000);
+    return result;
 }

SRC/writen.c

@@ -8,26 +8,25 @@
 #include "echoping.h"
 
 int
-writen (fd, ptr, nbytes)
-     register int fd;
-     register char *ptr;
-     register int nbytes;
+writen(fd, ptr, nbytes)
+    register int    fd;
+    register char  *ptr;
+    register int    nbytes;
 {
-  int nleft, nwritten;
+    int             nleft, nwritten;
 
-  nleft = nbytes;
-  while (nleft > 0)
-    {
-      nwritten = write (fd, ptr, nleft);
-      if (nwritten <= 0)
-	return (nwritten);	/* error */
-      /* Some systems, such as Digital's OSF1 (Digital Unix) doesn't set the returned
-         value to -1, even when interrupted by an alarm, whatever says the documentation.
-         errno is not set. */
-      if ((nwritten < nleft) && timeout_flag)
-	return nwritten;
-      nleft -= nwritten;
-      ptr += nwritten;
+    nleft = nbytes;
+    while (nleft > 0) {
+        nwritten = write(fd, ptr, nleft);
+        if (nwritten <= 0)
+            return (nwritten);  /* error */
+        /* Some systems, such as Digital's OSF1 (Digital Unix) doesn't set the
+         * returned value to -1, even when interrupted by an alarm, whatever says
+         * the documentation. errno is not set. */
+        if ((nwritten < nleft) && timeout_flag)
+            return nwritten;
+        nleft -= nwritten;
+        ptr += nwritten;
     }
-  return (nbytes - nleft);
+    return (nbytes - nleft);
 }

Web/Makefile

@@ -14,7 +14,7 @@ test: ${PAGESHTML}
 	done
 
 install: ${PAGESHTML}
-	cvs commit
+	svn commit
 	scp -v ${PAGESHTML} ${OTHERPAGES} ${DEST}
 
 checkbot:

Web/details.wml

@@ -5,12 +5,15 @@
 
 <H2>echo service</H2>
 
-<P>echoping assumes the remote host accepts such connections. Experience show that 
-most Internet routers do and many hosts also. However, some Unices are not 
-shipped with this service enabled and, anyway, the administrator is always 
-free to close it (I think they shouldn't). echoping has therefore less chance 
-to succeed than ping or bing. (On a typical Unix box, "echo" service is 
-configured in /etc/inetd.conf but see the <A HREF="http://www.cert.org/advisories/CA-96.01.UDP_service_denial.html">CERT advisory</A>.)
+<P>echoping, with its default setting, assumes the remote host accepts
+such connections. Experience show that most Internet routers or hosts
+do not. Some Unices are not shipped with this service enabled and,
+anyway, the administrator is always free to close it (I think they
+shouldn't). echoping has therefore less chance to succeed than ping or
+bing. (On a typical Unix box, "echo" service is configured in
+/etc/inetd.conf but see the <A
+HREF="http://www.cert.org/advisories/CA-1996-01.html">CERT
+advisory</A>.)
 
 <H2>What does it measure?</H2>
 
@@ -21,6 +24,12 @@ line raw throughput measures (unlike bing). On the other end, the action it
 performs are close from a HTTP request and it is meaningful to use it 
 (carefully) to measure Web performances. 
 
+<H3>More on Linux</H3>
+
+<P>On operating systems, like Linux, who have the TCP_INFO option (see
+<A HREF="http://linuxgazette.net/136/pfeiffer.html">a detailed
+presentation</A>), echoping can also display interesting TCP information.
+
 <H2>UDP and inetd</H2>
 
 <P>With UDP servers you can have surprises: the first test is quite often
@@ -41,12 +50,18 @@ SunOS need time to recover :-)
 <H3>Unix</H3>
 
 <UL>
-<LI><A HREF="ftp://ftp.lip6.fr/pub/networking">bing</A>, a bandwidth measurement tool
+<LI><A HREF="http://www.internet2.edu/~shalunov/thrulay/">thrulay</A>,
+  measures the capacity of a network by sending a bulk TCP stream over it
+<LI><A
+  HREF="http://www.freenix.fr/freenix/logiciels/bing.html">bing</A>, a
+  bandwidth measurement tool
+<LI>pathchar or <A
+  HREF="http://www.employees.org/~bmah/Software/pchar/">pchar</A>, a bandwidth measurement tool
 <LI>ping, probably available with your system
 <LI>traceroute, idem (otherwise, see <A HREF="ftp://ftp.ee.lbl.gov/">LBL</A>)
 <LI><A HREF="ftp://ftp.arl.mil/pub/ttcp/">ttcp</A>, the best measurement tool but it needs some control over the 
-  two machines (nothing to do with
-  the T/TCP protocol)
+  two machines 
+<LI><A HREF="ftp://ftp.scl.ameslab.gov/pub/netpipe/">Netpipe</A>, it needs some control over the two machines 
 <LI><A HREF="http://www.psc.edu/~pscnoc/treno_info.html">treno</A> (evaluates available bandwidth for TCP) 
 <LI>spray is a tool which I dont't know very well. It is available on some 
   machines (Sun, OSF/1).
@@ -65,7 +80,7 @@ SunOS need time to recover :-)
 <UL>
 <LI>TCP Watcher, a very nice "swiss-army knife" tool, to test ping, DNS, echo. 
   It includes an echo server. Available on <A
-  HREF="http://www.info-mac.org/">Info-Mac</A> in "comm/tcp".
+  HREF="http://www.info-mac.org/">Info-Mac</A> in "comm/inet".
 </UL>
 
 <H3>MS-Windows</H3>
@@ -93,17 +108,27 @@ can be enabled through the Network Control Panel
 
 <H3>Web clients</H3>
 
-You can ping or traceroute on the Web. See 
-  <A
-  HREF="http://www.freenix.org/cgi-bin/traceroute.iphtml">Freenix</A>,
-  <A HREF="http://www.fr.net/internet/trace.html">fr.net</A> (with
-  Autonomous Systems handling) or
-  <A HREF="http://www.tracert.com/">Multiple Traceroute Gateway</A>.
-
+You can ping or traceroute on the Web. See <A
+HREF="http://www.traceroute.org/">traceroute.org</A>.
 
 <P>Use all of them with care, the result is not obvious to interpret.
 
+<P>If you are interested in Internet measurements, there is an <A
+HREF="http://www.ietf.org/">Internet Engineering Task Force</A>
+Working Group, <A
+HREF="http://www.ietf.org/html.charters/ippm-charter.html">IPPM (IP
+Performance Metrics)</A> which produces many fine RFC that are really
+good to read. I appreciate RFC 2330 and 3148.
+
 <P>And don't forget to read RFC 1470 ("Tools for Monitoring and Debugging 
 TCP/IP Internets and Interconnected Devices"), specially its "Benchmark"
 section and the Richard Stevens' books (all of them), published by 
 Addison-Wesley.
+
+<P>Last, but not least, since statistics is typically a very neglected
+area in computer networks, <A
+HREF="http://www.statsoft.com/textbook/stbasic.html">Basic
+Statistics</A> is a fery useful resource. For the reasons why echoping
+displays median as well as average, see <A
+HREF="http://shlang.com/writing/mean-delay-considered-harmful.html">Mean
+Delay Considered Harmful</A>.

Web/donations.wml

@@ -1,19 +1,7 @@
 #use wml::template Title="echoping donations"
 
-<!-- $Id$ -->
-
 <P>If you want to help and/or motivate echoping and its developer, you <em>can</em>
 (but are not forced to do so, echoping is free software):
 
-<OL>
-  <LI>Give money through <A HREF="http://sourceforge.net/project/project_donations.php?group_id=4581">Sourceforge's donation system</A>
-  <LI>Use my <A HREF="http://www.amazon.com/gp/registry/23ELBV1YZ93SC">Amazon's wish list</A>
-  <LI>Send me a postcard. I love postcards:<BR>
-       Stephane Bortzmeyer<BR>
-       12, rue Chauvelot<BR>
-       75015 Paris<BR>
-       France
-</OL>
-
-<P>Or give money to a worthy cause :-)
+<P>Give money to a worthy cause :-)
 

Web/index.wml

@@ -3,17 +3,21 @@
 <!-- $Id$ -->
 
 <P>"echoping" is a small program to test (approximatively) performances of a 
-remote host by sending it TCP "echo" (or other protocol) packets.
+remote host by sending it requests such as HTTP requests.
 
-<P>To install it, see the INSTALL file. Or type "<code>./configure && make
-&& sudo make install</code>" if you're in a
+<P>To install it, see the INSTALL file. Or type "<code>./configure
+--config-cache&& make && sudo make install</code>" if you're in a
 hurry :-) Several operating systems have echoping already packaged
-(Debian, FreeBSD, NetBSD). <A
-HREF="ftp://ftp.internatif.org/pub/unix/echoping">Download</A>, if you
-wish. (Or you may prefer access the latest developments <A
-HREF="http://sourceforge.net/cvs/?group_id=4581">via CVS</A>: the
-module is named "SRC".) You may be interested in <A HREF="http://sourceforge.net/project/?group_id=4581">SourceForge's page
-about echoping</A>, with the bug reports, etc.
+(Debian, Gentoo, FreeBSD, NetBSD). <A
+HREF="http://sourceforge.net/project/showfiles.php?group_id=4581&package_id=4579">Download</A>, if you
+wish. You may be interested also in <A
+HREF="http://sourceforge.net/project/?group_id=4581">SourceForge's
+page about echoping</A>, with the bug reports, etc.
+
+You may prefer access the latest developments <A
+HREF="http://sourceforge.net/svn/?group_id=4581">via Subversion</A>:
+the module is named "SRC"; but <EM>be careful</EM>, this is not for the faint
+of heart and you need to master GNU auto* tools.
 
 <P>To use it, simply:
 
@@ -33,16 +37,17 @@ test hosts which aren't yours.
 <P>Current features:
 
 <UL>
+<LI>plugins, so you can extend
+echoping with any protocol you like and/or use,
 <LI>Supports IPv6 as well as IPv4,
 <LI>Supports IDN (Unicode domain names like <CODE>café.gennic.net</CODE>),
 <LI>uses the protocols echo, discard, chargen or HTTP,
 <LI>can use cryptographic connections with HTTP,
 <LI>uses UDP instead of TCP for the protocols which accept it (like echo),
 <LI>can repeat the test and display various measures about it,
-<LI>can use T/TCP on systems which support it.
 </UL>
 
-<P><A HREF="http://sourceforge.net/bugs/?func=browse&group_id=4581&set=open">Known bugs</A>
+<P><A HREF="http://sourceforge.net/bugs/?func=browse&amp;group_id=4581&amp;set=open">Known bugs</A>
 
 <P>Examples of output:
 
@@ -64,7 +69,10 @@ Checked
 Elapsed time: 0.326960 seconds
 </PRE>
 
-<LI>(Repeated tests with average and median displayed.)
+<LI>(Repeated tests with average / mean and <A
+HREF="http://www.internet2.edu/~shalunov/writing/mean-delay-considered-harmful.html">median</A>
+displayed.)
+  
 <PRE>
 % echoping -n 10 faraway-machine
 [...]
@@ -86,9 +94,10 @@ Elapsed time: 0.686792 seconds
 <P>The exit status is set if there is any problem, so you can use
 echoping to test repeatedly a Web server, to be sure it runs fine (<A
 HREF="http://people.ee.ethz.ch/~oetiker/webtools/smokeping/">SmokePing</A>
-does it). Or you can display statistics like <A
-HREF="https://monitor.netaktiv.com/MRTG/web.html">at Netaktiv</A> (see
-the <A HREF="echoping-web.sh">shell script</A> which runs echoping).
+does it). Or you can display statistics with <A
+HREF="http://people.ee.ethz.ch/~oetiker/webtools/mrtg/">MRTG</A>. (see
+an example of a <A HREF="echoping-web.sh">shell script</A> which runs echoping
+from MRTG).
 
 <P>To do for a future version: see the TODO file.
 

tickets-SourceForge/patches.json

@@ -0,0 +1,755 @@
+{"tickets": [{
+  "status": "open-fixed",
+  "reported_by_id": "4f74b61d71b75b397a006f01",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "zcougar",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "RPM spec file",
+  "description": "I made RPM spec file for echoping. It would be nice if\r\nyou can put this file into the package. Then it will be\r\nvery easy to make RPM from source \\(rpm -ta\r\nechoping-x.x.x.tar.gz\\).\r\n\r\nBoth SRPM and RPM built on SuSE 9.0 are available also:\r\n\r\nhttp://www.version6.net/rpm/ecmh-20040110-1.src.rpm\r\nhttp://www.version6.net/rpm/ecmh-20040110-1.i586.rpm\r\n\r\n\\-- \r\nCougar\r\n",
+  "discussion_thread": {
+    "_id": "7bc6a80d",
+    "posts": [
+      {
+        "text": "echoping RPM spec file",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/7bc6a80d/fac2/attachment/echoping.spec",
+            "bytes": 1116
+          }
+        ],
+        "author": "zcougar",
+        "timestamp": "2004-06-30 17:52:52",
+        "last_edited": null,
+        "slug": "fac2",
+        "subject": "#1 RPM spec file"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nOK, downloaded the right :-\\) \".src.rpm\" from rhttp://www.version6.net/rpm, \"rpm2cpio echoping.src.rpm | cpio -idv\"\r\n\r\nBut the echoping.spec is not much better than the one already in echoping distribution. I merged the two files, committed in Subversion \\(r. 358\\) testing on a RPM-enabled machine is now needed.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 21:37:47",
+        "last_edited": null,
+        "slug": "0956",
+        "subject": "#1 RPM spec file"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz\n- **status**: open --> open-fixed",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 21:37:47",
+        "last_edited": null,
+        "slug": "b62c",
+        "subject": "#1 RPM spec file"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-07 21:37:47",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabb45fcbc979b923a2e8",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/7bc6a80d/",
+  "ticket_num": 1,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2004-06-30 17:52:51"
+},{
+  "status": "closed-fixed",
+  "reported_by_id": null,
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "*anonymous",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "add WHOIS support and fix duplicate write to server",
+  "description": "This patch adds whois support to echoping. It also\r\nremoves a\r\nproblem that caused the \"sendline\" to be sent to the\r\nserver twice. This problem causes the SMTP-checker to\r\nsend QUIT twice, which is not so important, but it\r\nactually broke the WHOIS check against some servers.\r\n\r\nTo use WHOIS, do this:\r\nechoping -W example.com hostname\r\n\r\nThe reading/writing seems to be a bit shaky, it fails\r\nwith some servers. I'm not sure why, could be something\r\nis not completely correct in the patch.\r\n\r\nKetil Froyn <ketil@froyn.name>",
+  "discussion_thread": {
+    "_id": "c0518af1",
+    "posts": [
+      {
+        "text": "Patch to add WHOIS support to echoping and remove duplicate write",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/c0518af1/72e0/attachment/echoping_add_whois.diff",
+            "bytes": 6038
+          }
+        ],
+        "author": "nobody",
+        "timestamp": "2004-08-12 16:28:03",
+        "last_edited": null,
+        "slug": "72e0",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: NO \n\nThis is the kind of error I get:\r\n\r\nreadline error: 1 bytes read, 13 bytes requested \\(Illegal seek\\)\r\n\r\nI haven't debugged the reason for this, it works for me for now.\r\n\r\nKetil Froyn <ketil@froyn.name>",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2004-08-12 16:30:53",
+        "last_edited": null,
+        "slug": "fbfb",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nThanks for the patch and report.\r\n\r\nBut, sorry, but the whois patch will not be used. The next version of echoping will use a system of plugins so every new request for a new protocol will be handled by \"Develop a plugin, Luke\" \\(there is already one for whois\\).\r\n\r\nYou can try the next version at ftp://ftp.internatif.org/pub/unix/echoping/echoping-6.0-BETA.tar.gz\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:37:23",
+        "last_edited": null,
+        "slug": "890f",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz\n- **status**: open --> open-wont-fix",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:37:23",
+        "last_edited": null,
+        "slug": "1bcc",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nI cannot reproduce the \"two QUIT\" problem, sorry.\\(Checked with Wireshark.\\)\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:47:19",
+        "last_edited": null,
+        "slug": "24be",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nechoping 6 released, with the whois plugin",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 20:59:52",
+        "last_edited": null,
+        "slug": "77f4",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "- **status**: open-wont-fix --> closed-fixed",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 20:59:52",
+        "last_edited": null,
+        "slug": "9214",
+        "subject": "#2 add WHOIS support and fix duplicate write to server"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 20:59:52",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabb55fcbc979b923a304",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/c0518af1/",
+  "ticket_num": 2,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2004-08-12 16:28:03"
+},{
+  "status": "closed-duplicate",
+  "reported_by_id": null,
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "*anonymous",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "improved:add WHOIS support and fix duplicate write to server",
+  "description": "Usage:\r\nechoping -W example.com whois.crsnic.net\r\n\r\nTested like this:\r\npatch -p1 < echoping\\_add\\_whois.diff\r\naclocal && automake --add-missing && autoconf &&\r\n./configure --without-libidn\r\nmake\r\n./echoping -W example.com whois.crsnic.net\r\n\r\nI haven't experienced any more problems after this rewrite.\r\n\r\nKetil Froyn <ketil@froyn.name>\r\n\r\n",
+  "discussion_thread": {
+    "_id": "2bdac84c",
+    "posts": [
+      {
+        "text": "WHOIS support for echoping",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/2bdac84c/f246/attachment/echoping_add_whois.diff",
+            "bytes": 8605
+          }
+        ],
+        "author": "nobody",
+        "timestamp": "2004-08-13 11:44:10",
+        "last_edited": null,
+        "slug": "f246",
+        "subject": "#3 improved:add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nSee the discussion in \\#1008066",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:40:52",
+        "last_edited": null,
+        "slug": "074b",
+        "subject": "#3 improved:add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz\n- **status**: open --> open-duplicate",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:40:52",
+        "last_edited": null,
+        "slug": "29e7",
+        "subject": "#3 improved:add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nechoping 6 released and should be OK.",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:01:16",
+        "last_edited": null,
+        "slug": "3b87",
+        "subject": "#3 improved:add WHOIS support and fix duplicate write to server"
+      },
+      {
+        "text": "- **status**: open-duplicate --> closed-duplicate",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:01:16",
+        "last_edited": null,
+        "slug": "5bb8",
+        "subject": "#3 improved:add WHOIS support and fix duplicate write to server"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:01:16",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabb85fcbc979b923a333",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/2bdac84c/",
+  "ticket_num": 3,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2004-08-13 11:44:10"
+},{
+  "status": "closed-out-of-date",
+  "reported_by_id": "51840af32718467ad6898df9",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "afm",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "Fix for incorrect Host: header and memory leak",
+  "description": "The attached patch takes care not to include a port in the Host: \r\nheader of the HTTP request if the port is not set \\(i.e. = 0\\) as \r\nargument to make\\_http\\_sendline.\r\n\r\nFurthermore, it fixes the memory leak caused by the fact that \r\nhostname is not freed when HTTP10 is defined.",
+  "discussion_thread": {
+    "_id": "c9820fce",
+    "posts": [
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nIt seems there is no patch attached \\(same problem for \\#1282749\\)\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:48:52",
+        "last_edited": null,
+        "slug": "0000",
+        "subject": "#4 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:48:52",
+        "last_edited": null,
+        "slug": "0d1d",
+        "subject": "#4 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nSeems OK with the release of echoping 6. Feel free to reopen if not OK.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:03:09",
+        "last_edited": null,
+        "slug": "e6e3",
+        "subject": "#4 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "- **status**: open --> closed-out-of-date",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:03:09",
+        "last_edited": null,
+        "slug": "b2fc",
+        "subject": "#4 Fix for incorrect Host: header and memory leak"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:03:09",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabba5fcbc979b923a358",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/c9820fce/",
+  "ticket_num": 4,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2005-09-06 08:46:48"
+},{
+  "status": "closed-duplicate",
+  "reported_by_id": "51840af32718467ad6898df9",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "afm",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "Fix for incorrect Host: header and memory leak",
+  "description": "The attached patch takes care not to include a port in the Host: \r\nheader of the HTTP request if the port is not set \\(i.e. = 0\\) as \r\nargument to make\\_http\\_sendline.\r\n\r\nFurthermore, it fixes the memory leak caused by the fact that \r\nhostname is not freed when HTTP10 is defined.",
+  "discussion_thread": {
+    "_id": "224c2394",
+    "posts": [
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nSee \\#1282748",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:49:22",
+        "last_edited": null,
+        "slug": "ab70",
+        "subject": "#5 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz\n- **status**: open --> open-duplicate",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:49:22",
+        "last_edited": null,
+        "slug": "6af3",
+        "subject": "#5 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nShould be obsolete with the release of 6.0.0",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:04:56",
+        "last_edited": null,
+        "slug": "42f8",
+        "subject": "#5 Fix for incorrect Host: header and memory leak"
+      },
+      {
+        "text": "- **status**: open-duplicate --> closed-duplicate",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:04:56",
+        "last_edited": null,
+        "slug": "f1c6",
+        "subject": "#5 Fix for incorrect Host: header and memory leak"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:04:56",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabbb5fcbc979b923a373",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/224c2394/",
+  "ticket_num": 5,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2005-09-06 08:46:49"
+},{
+  "status": "closed-fixed",
+  "reported_by_id": "4f3540db0594ca2bc0000b32",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "bortz",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "Stats enhancement from Andy Juniper",
+  "description": "\r\nAttached is a patch which addresses the following\r\nissues/enhancements in\r\nechoping-6.0-BETA:\r\n\r\n\\* add a -D command line option to measure latency\r\nover data transfer\r\ntime only, for TCP connections this excludes the\r\nconnection setup \r\nand teardown which can take a long time if DNS and\r\nARP are involved\r\n\\* fix underflow in the standard deviation\r\ncalculation routine, where\r\nif the deviations were small \\(microseconds\\) then\r\nthe standard\r\ndeviation would report as 0 due to performing the\r\nsquare/square\r\nroot operations on integers; the whole of the SD\r\ncalculation is\r\nnow performed using doubles.\r\n\\* add a -N <number> command line option to\r\noptionally additionally\r\nreport a recalculated average which excludes\r\nvalues which are   \r\nfurther than +/- N\\*standard deviation from the\r\naverage; this means\r\nthat values which are a long way off the average\r\nget removed from \r\nthe recalculated average.  See                   \r\n\r\n\r\nhttp://www.statsoft.com/textbook/stbasic.html\\#Correlationse\r\nfor\r\ndetails of why I've done this.\r\n\r\nPlease feel free to incorporate these changes into your\r\ncode\\!\r\n\r\nAndy Juniper\r\n",
+  "discussion_thread": {
+    "_id": "02ec69da",
+    "posts": [
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: YES\n\nUnfortunately, there is no patch attached :-\\(\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:51:17",
+        "last_edited": null,
+        "slug": "864f",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/02ec69da/0f8a/attachment/echoping.patch",
+            "bytes": 8673
+          }
+        ],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:53:26",
+        "last_edited": null,
+        "slug": "0f8a",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: YES\n\nPatch attached, this time\nFile Added: echoping.patch",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 15:53:26",
+        "last_edited": null,
+        "slug": "a50b",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: YES\n\nCommitted in Subversion, r356.",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 21:02:43",
+        "last_edited": null,
+        "slug": "0e90",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: YES\n\nAnd documented and credited.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 21:21:37",
+        "last_edited": null,
+        "slug": "e0e4",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "- **status**: open --> open-fixed",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-07 21:21:37",
+        "last_edited": null,
+        "slug": "59d9",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: YES\n\nShipped with echoping 6",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:07:42",
+        "last_edited": null,
+        "slug": "9680",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "- **status**: open-fixed --> closed-fixed",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:07:42",
+        "last_edited": null,
+        "slug": "ebb2",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Wonderful blog\\! Do you have any suggestions for aspiring writers? I'm hoping to start my own website soon but I'm a little lost on everything. Would you advise starting with a free platform like Wordpress or go for a paid option? There are so many choices out there that I'm completely overwhelmed .. Any suggestions? Bless you\\!\r\nnorth face jackets on sale http://rmngnwbxvw.wallinside.com/",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2012-11-11 23:53:33",
+        "last_edited": null,
+        "slug": "a2a1",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Greetings from Carolina\\! I'm bored to death at work so I decided to check out your blog on my iphone during lunch break. I really like the information you provide here and can't wait to take a look when I get home. I'm amazed at how fast your blog loaded on my phone .. I'm not even using WIFI, just 3G .. Anyways, fantastic site\\!\r\nnorth face jackets for women http://ltfcjmwhsw.blinkweb.com/new-blog.html",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2012-11-16 12:49:26",
+        "last_edited": null,
+        "slug": "31d3",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      },
+      {
+        "text": "Do you mind if I quote a couple of your articles as long as I provide credit and sources back to your weblog? My blog site is in the exact same area of interest as yours and my visitors would really benefit from a lot of the information you present here. Please let me know if this alright with you. Regards\\!\r\nnorth face jackets on sale http://vzbeclxtke.jimdo.com/2012/11/15/cheap-north-face-jackets-whether-you-are-wearing-a-dress-or-a-pantsuit/",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2012-11-17 13:20:27",
+        "last_edited": null,
+        "slug": "1521",
+        "subject": "#6 Stats enhancement from Andy Juniper"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:07:42",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabbb5fcbc979b923a38e",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/02ec69da/",
+  "ticket_num": 6,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2006-04-12 07:50:38"
+},{
+  "status": "open-later",
+  "reported_by_id": "514b78ad34309d5f016e9029",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "dawn_guy",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "SMTP enhancement from Dawn Keenan",
+  "description": "The attached patch makes echoping more friendly towards\r\nSMTP servers as well as more accurate with respect to\r\nreal time response.  Wait for the greeting before\r\nsending HELO to the mail server and then provide the\r\nstart of an email conversation in a way that isn't\r\nlikely to generate spurious warnings in the probed\r\nhost's syslog.",
+  "discussion_thread": {
+    "_id": "884a274b",
+    "posts": [
+      {
+        "text": "echoping.c context diff",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/884a274b/21ba/attachment/echoping.c.diff",
+            "bytes": 1259
+          }
+        ],
+        "author": "dawn_guy",
+        "timestamp": "2006-06-26 14:53:45",
+        "last_edited": null,
+        "slug": "21ba",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nI don't think that sending \"HELO echoping\" is a good idea.\r\n\r\n1\\) It is not a legal host name and, today, with the spam problem, many sites test that\r\n\r\n2\\) Even if it were \\(HELO echoping.sourceforge.net\\), various anti-spam techniques would do more aggressive testing and probably reject.\r\n\r\nThe issue stays open. I agree with your goals but there is no simple solution.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-08 10:28:35",
+        "last_edited": null,
+        "slug": "4a6f",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "- **assigned_to**: nobody --> bortz",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-08 10:28:35",
+        "last_edited": null,
+        "slug": "316a",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\n> Wait for the greeting before\r\n> sending HELO to the mail server\r\n\r\nThis is a very good idea. Committed in Subversion, r 359.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-08 10:34:34",
+        "last_edited": null,
+        "slug": "38af",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nThe patch to wait the greeting has been shipped with echoping 6.\r\n\r\nThe idea to add a HELO is good but postponed.\r\n",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:32:39",
+        "last_edited": null,
+        "slug": "7035",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "- **status**: open --> open-later",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-03-26 21:32:39",
+        "last_edited": null,
+        "slug": "c711",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      },
+      {
+        "text": "Logged In: YES \nuser\\_id=25865\nOriginator: NO\n\nSee \\#1692780",
+        "attachments": [],
+        "author": "bortz",
+        "timestamp": "2007-04-02 10:27:50",
+        "last_edited": null,
+        "slug": "29c2",
+        "subject": "#7 SMTP enhancement from Dawn Keenan"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:32:39",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabbf5fcbc979b923a3d1",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/884a274b/",
+  "ticket_num": 7,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2006-06-26 14:53:45"
+},{
+  "status": "open",
+  "reported_by_id": "4f3540db0594ca2bc0000b32",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "bortz",
+  "assigned_to": "bortz",
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": "4f3540db0594ca2bc0000b32",
+  "private": false,
+  "summary": "Hanging fgets if the server is down",
+  "description": "Sent from \"Moelaert, J.P. \\(Johan\\)\" <J.P.Moelaert@utwente.nl>. Not confirmed with echoping 6.\r\n\r\n\r\nI've been using echoping for a month to test if a proxyserver.\r\nSince yesterday I wanted tio use it to test if a webhare server was\r\nrunning.\r\nThe command used was:\r\n\r\nechoping -t1 -h https://webhare.utwente.nl weblx030.civ.utwente.nl:80\r\n\r\nIt seemed to work.\r\nBut when the website was down the command seemed to hang in its fgets\r\ncall.\r\nExport help refered me to\r\n\r\nhttp://groups.google.com/group/comp.os.linux.development.system/browse\\_f\r\nrm/thread/20118509359c9292/19bd5388e468c1fa?lnk=st&q=SIGALRM+fgets&rnum=\r\n12&hl=en\\#19bd5388e468c1fa\r\n<http://groups.google.com/group/comp.os.linux.development.system/browse\\_\r\nfrm/thread/20118509359c9292/19bd5388e468c1fa?lnk=st&q=SIGALRM+fgets&rnum\r\n=12&hl=en\\#19bd5388e468c1fa>\r\n\r\nThis describes a similar problem with fgets.\r\nI added the following to readline.c in the function readline\r\n\r\nfd\\_set rfds;\r\nstruct timeval tv;\r\nint retval, fd= fileno\\(fs\\);\r\n\r\n/\\* watch fildescriptor to see when it has input. \\*/\r\nFD\\_ZERO\\(&rfds\\);\r\nFD\\_SET\\(fd, &rfds\\);\r\n/\\* wait up to number of seconds indicated by timeout \\*/\r\ntv.tv\\_sec = timeout;\r\ntv.tv\\_usec = 0;\r\n/\\* use select to determine readability \\*/\r\nretval = select\\( fd, &rfds, NULL, NULL, &tv \\);\r\n\r\n/\\* let's see what we got \\*/\r\nif \\( retval == -1 \\) \\{\r\nperror\\(\"select\\(\\)\"\\);\r\nreturn \\(-1\\);\r\n\\} else if \\( retval == 0 \\) \\{\r\n/\\* timeout reached \\*/\r\nreturn \\(-1\\);         \r\n\\}\r\n/\\* passed the select; start reading from a valid stream \\*/\r\n\r\nI also brought the timeout in main from echoping.c to global level.\r\nThis was then declared as external in readline.c\r\n\r\nThis solved my problem with a hanging fgets.\r\n",
+  "discussion_thread": {
+    "_id": "48ab69c7",
+    "posts": [
+      {
+        "text": "k6WEof  <a href=\"http://gosjohgbbzhk.com/\">gosjohgbbzhk</a>, \\[url=http://ufkdhpznjmpw.com/\\]ufkdhpznjmpw\\[/url\\], \\[link=http://nhafrpxtcgyw.com/\\]nhafrpxtcgyw\\[/link\\], http://tvuxugxrdfgj.com/",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2013-04-15 07:48:11",
+        "last_edited": null,
+        "slug": "521f",
+        "subject": "#8 Hanging fgets if the server is down"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2007-03-26 21:09:01",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabc05fcbc979b923a402",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/48ab69c7/",
+  "ticket_num": 8,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2007-03-26 21:09:01"
+},{
+  "status": "open",
+  "reported_by_id": "518aabc15fcbc979b923a410",
+  "related_artifacts": [],
+  "attachments": [],
+  "reported_by": "zu2",
+  "assigned_to": null,
+  "labels": [],
+  "discussion_disabled": false,
+  "assigned_to_id": null,
+  "private": false,
+  "summary": "'Cannot load \".so\"' patch on CentOS 5.4",
+  "description": "When running echoping 6.0.2 on the CentOS 5.4 with option \"-m\", it becomes an error. \r\n\r\nThe same variable is used at line 476 in echoping.c , as the destination and the argument of sprintf.\r\n\r\nI think that is reason for 'Cannot load \".so\"'.\r\n\r\nI wrote a patch here. \r\n\r\nthanks.",
+  "discussion_thread": {
+    "_id": "feaaf7e8",
+    "posts": [
+      {
+        "text": "",
+        "attachments": [
+          {
+            "url": "http://sourceforge.net/p/echoping/patches/_discuss/thread/feaaf7e8/d995/attachment/echoping.patch.txt",
+            "bytes": 652
+          }
+        ],
+        "author": "zu2",
+        "timestamp": "2010-01-21 12:19:35",
+        "last_edited": null,
+        "slug": "d995",
+        "subject": "#9 'Cannot load \".so\"' patch on CentOS 5.4"
+      },
+      {
+        "text": "\\# ./echoping -m dns\r\nCannot load \".so\" \\(I tried the short name, then the complete name in \"/usr/lib/echoping\"\\): /usr/lib/echoping/.so: cannot open shared object file: No such file or directory\r\n\\#\r\n",
+        "attachments": [],
+        "author": "zu2",
+        "timestamp": "2010-01-21 12:20:22",
+        "last_edited": null,
+        "slug": "b050",
+        "subject": "#9 'Cannot load \".so\"' patch on CentOS 5.4"
+      },
+      {
+        "text": "g3VkG7  <a href=\"http://owhoajeejjei.com/\">owhoajeejjei</a>, \\[url=http://qsyegjeevmkc.com/\\]qsyegjeevmkc\\[/url\\], \\[link=http://rirzyefjjvhb.com/\\]rirzyefjjvhb\\[/link\\], http://rhwqixzbyfza.com/",
+        "attachments": [],
+        "author": "nobody",
+        "timestamp": "2013-04-15 20:16:36",
+        "last_edited": null,
+        "slug": "c13b",
+        "subject": "#9 'Cannot load \".so\"' patch on CentOS 5.4"
+      }
+    ],
+    "discussion_id": "518aabb45fcbc979b923a2dd",
+    "subject": ""
+  },
+  "mod_date": "2010-01-21 12:19:35",
+  "votes_down": 0,
+  "votes_up": 0,
+  "_id": "518aabc15fcbc979b923a40f",
+  "discussion_thread_url": "http://sourceforge.net/rest/p/echoping/patches/_discuss/thread/feaaf7e8/",
+  "ticket_num": 9,
+  "custom_fields": {
+    "_priority": "5"
+  },
+  "created_date": "2010-01-21 12:19:35"
+}],
+"tracker_config":{
+  "_id": "518aabb45fcbc979b923a2db",
+  "options": {
+    "ordinal": 7,
+    "import_id": "tracker/304581",
+    "mount_point": "patches",
+    "TicketMonitoringType": null,
+    "EnableVoting": false,
+    "TicketMonitoringEmail": "",
+    "mount_label": "Patches"
+  }
+},
+"milestones":[],
+"custom_fields":[
+  {
+    "milestones": [],
+    "type": "milestone",
+    "name": "_milestone",
+    "label": "Group"
+  },
+  {
+    "label": "Priority",
+    "type": "select",
+    "options": "1 2 3 4 *5 6 7 8 9",
+    "name": "_priority"
+  }
+],
+"open_status_names":"open unread accepted pending open-fixed open-later",
+"closed_status_names":"wont-fix closed-fixed closed-duplicate closed-out-of-date",
+"saved_bins":[
+  {
+    "sort": "mod_date_dt desc",
+    "_id": "518aabb45fcbc979b923a2e4",
+    "terms": "!status:closed-duplicate && !status:wont-fix && !status:closed-fixed && !status:closed-out-of-date",
+    "summary": "Changes"
+  },
+  {
+    "sort": "",
+    "_id": "518aabb45fcbc979b923a2e3",
+    "terms": "status:closed-duplicate or status:wont-fix or status:closed-fixed or status:closed-out-of-date",
+    "summary": "Closed Tickets"
+  },
+  {
+    "sort": "",
+    "_id": "518aabb45fcbc979b923a2e2",
+    "terms": "!status:closed-duplicate && !status:wont-fix && !status:closed-fixed && !status:closed-out-of-date",
+    "summary": "Open Tickets"
+  }
+]}