diff --git a/README.md b/README.md
index 41d473e..c3a1e8e 100644
--- a/README.md
+++ b/README.md
@@ -29,9 +29,9 @@ You can now use the Pillbug dev board along with ZMK firware to make this a wire
| Pillbug | 1 | MechWild [Link](https://mechwild.com/product/pillbug/)
| 2000 mAh battery | 1 | Amazon [Link](https://a.co/d/hlTVT1p)
-v2022-08-05 of the PCB requires you to bridge the 3.3v pins with a wire. The diagram below shows you which pins.
+v2022-08-05 of the PCB requires you to bridge the 3.3v pins with a wire. You can do this easily after soldering the controller in place and tacking a short wire with stripped ends to the existing solder joints on the same side as the LEDs/resistors. The diagram below shows you which pins.
-
+
The current version in the repo does not require this.
@@ -46,4 +46,4 @@ Source: https://github.com/dcpedit/vial-qmk-dev/tree/vial/keyboards/dcpedit/kint
### ZMK
Source: https://github.com/dcpedit/zmk/tree/kinesispb/app/boards/shields/kinesispb
* `/firmware/zmk_default.uf2` - Default keymap (stock Kinesis)
-* `/firmware/zmk_reset.uf2` - Resets PillBug board for BT connectivity issue on MacOS
\ No newline at end of file
+* `/firmware/zmk_reset.uf2` - Resets PillBug board for BT connectivity issue on MacOS