Cpuset (cset) Tutorial ====================== Alex Tsariounov + Copyright (c) 2009-2011 Novell Inc., cset v1.6pre1 + Verbatim copying and distribution of this entire article are permitted worldwide, without royalty, in any medium, provided this notice is preserved. This tutorial describes basic and advanced usage of the *cset* command to manipulate cpusets on a Linux system. See also the manpages that come with the *cset* command: cset(1), cset-shield(1), cset-set(1), and cset-proc(1) for more details. Additionally, the *cset* command has online help. Introduction ============ In the Linux kernel, the cpuset facility provides a mechanism for creating logical entities called "cpusets" that encompass definitions of CPUs and NUMA Memory Nodes (if NUMA is available). Cpusets constrain the CPU and Memory placement of a task to only the resources defined within that cpuset. These cpusets can then be arranged into a nested hierarchy visible in the "cpuset" virtual filesystem. Sets of tasks can be assigned to these cpusets to constrain the resources that they use. The tasks can be moved from one cpuset to another to utilize other resources defined in those other cpusets. The *cset* command is a Python application that provides a command line front end for the Linux cpusets functionality. Working with cpusets directly can be confusing and slightly complex. The *cset* tool hides that complexity behind an easy-to-use command line interface. There are two distinct use cases for *cset*: the basic shielding use case and the "advanced" case of using raw +set+ and +proc+ subcommands. The basic shielding function is accessed with the +shield+ subcommand and described in the next section. Using the raw +set+ and +proc+ subcommands allows one to set up arbitrarily complex cpusets and is described in the later sections. Note that in general, one either uses the +shield+ subcommand 'or' a combination of the +set+ and +proc+ subcommands. One rarely, if ever, uses all of these subcommands together. Doing so will likely become too confusing. Additionally, the +shield+ subcommand sets up its required cpusets with exclusively marked CPUs. This can interfere with your cpuset strategy. If you find that you need more functionality for your strategy than +shield+ provides, go ahead and transition to using +set+ and +proc+ exclusively. It is straightforward to implement what +shield+ does with a few extra +set+ and +proc+ subcommands. Obtaining Online Help --------------------- For a full list of *cset* subcommands:: +# cset help+ For in-depth help on individual subcommands:: +# cset help + For options of individual subcommands:: +# cset (-h | --help)+ The Basic Shielding Model ========================= Although any set up of cpusets can really be described as "shielding," there is one prevalent shielding model in use that is so common that *cset* has a subcommand that is dedicated to its use. This subcommand is called +shield+. The concept behind this model is the use of three cpusets. The 'root' cpuset which is always present in all configurations and contains all CPUs. The 'system' cpuset which contains CPUs which are used for system tasks. These are the normal tasks that are not "important," but which need to run on the system. And finally, the 'user' cpuset which contains CPUs which are used for "important" tasks. The 'user' cpuset is the shield. Only those tasks that are somehow important, usually tasks whose performance determines the overall rating for the machine, are run in the 'user' cpuset. The +shield+ subcommand manages all of these cpusets and lets you define the CPUs and Memory Nodes that are in the 'shielded' and 'unshielded' sets. The subcommand automatically moves all movable tasks on the system into the 'unshielded' cpuset on shield activation, and back into the 'root' cpuset on shield tear down. The subcommand then lets you move tasks into and out of the shield. Additionally, you can move special tasks (kernel threads) which normally run in the 'root' cpuset into the 'unshielded' set so that your shield will have even less disturbance. The +shield+ subcommand abstracts the management of these cpusets away from you and provides options that drive how the shield is set up, which tasks are to be shielded and which tasks are not, and status of the shield. In fact, you need not be bothered with the naming of the required cpusets or even where the cpuset filesystem is mounted. *Cset* and the +shield+ subcommand takes care of all that. If you find yourself needing to define more cpusets for your application, then it is likely that this simple shielding is not a rich enough model for you. In this case, you should transition to using the +set+ and +proc+ subcommands described in a later section. A Simple Shielding Example -------------------------- Assume that we have a 4-way machine that is not NUMA. This means there are 4 CPUs at our disposal and there is only one Memory Node available. On such machines, we do not need to specify any memory node parameters to *cset*, it sets up the only available memory node by default. Usually, one wants to dedicate as many CPUs to the shield as possible and leave a minimal set of CPUs for normal system processing. The reasoning for this is because the performance of the important tasks will rule the performance of the installation as a whole and these important tasks need as many resources available to them as possible, exclusive of other, unimportant tasks that are running on the system. NOTE: I use the word "task" to represent either a process or a thread that is running on the system. Setup and Teardown of the Shield ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To set up a shield of 3 CPUs with 1 CPU left for low priority system processing, issue the following command. ------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield -c 1-3 cset: --> activating shielding: cset: moving 176 tasks from root into system cpuset... [==================================================]% cset: "system" cpuset of CPUSPEC(0) with 176 tasks running cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running ------------------------------------------------------------------- This command does a number of things. First, a 'user' cpuset is created with what's called a CPUSPEC (CPU specification) from the +-c/\--cpu+ option. This CPUSPEC specifies to use CPUs 1 through 3 inclusively. Next, the command creates a 'system' cpuset with a CPUSPEC that is the inverse of the +-c+ option for the current machine. On this machine that cpuset will only contain the first CPU, CPU0. Next, all userspace processes running in the 'root' cpuset are transfered to the 'system' cpuset. This makes all those processes run only on CPU0. The effect of this is that the shield consists of CPUs 1 through 3 and they are now idling. Note that the command did not move the kernel threads that are running in the 'root' cpuset to the 'system' cpuset. This is because you may want these kernel threads to use all available CPUs. If you do not, the you can use the +-k/\--kthread+ option as described below. The shield setup command above outputs the information of which cpusets were created and how many tasks are running on each. If you want to see the current status of the shield again, issue this command: ------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield cset: --> shielding system active with cset: "system" cpuset of CPUSPEC(0) with 176 tasks running cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running ------------------------------------------------------------------- Which shows us that the shield is set up and that 176 tasks are running in the 'system' cpuset--the "unshielded" cpuset. It is important to move all possible tasks from the 'root' cpuset to the unshielded 'system' cpuset because a task's cpuset property is inherited by its children. Since we've moved all running tasks (including init) to the unshielded 'system' cpuset, that means that any new tasks that are spawned will *also* run in the unshielded 'system' cpuset. Some kernel threads can be moved into the unshielded 'system' cpuset as well. These are the threads that are not bound to specific CPUs. If a kernel thread is bound to a specific CPU, then it is generally not a good idea to move that thread to the 'system' set because at worst it may hang the system and at best it will slow the system down significantly. These threads are usually the IRQ threads on a real time Linux kernel, for example, and you may want to not move these kernel threads into 'system'. If you leave them in the 'root' cpuset, then they will have access to all CPUs. However, if your application demands an even "quieter" shield, then you can move all movable kernel threads into the unshielded 'system' set with the following command. -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield -k on cset: --> activating kthread shielding cset: kthread shield activated, moving 70 tasks into system cpuset... [==================================================]% cset: done -------------------------------------------------------------------- You can see that this moved an additional 70 tasks to the unshielded 'system' cpuset. Note that the +-k/\--kthread on+ parameter can be given at the shield creation time as well and you do not need to perform these two steps separately if you know that you will want kernel thread shielding as well. Executing *cset shield* again shows us the current state of the shield. -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield cset: --> shielding system active with cset: "system" cpuset of CPUSPEC(0) with 246 tasks running cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running -------------------------------------------------------------------- You can get a detailed listing of what is running in the shield by specifying either +-s/\--shield+ or +-u/\--unshield+ to the +shield+ subcommand and using the verbose flag. You will get output similar to the following. -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield --unshield -v cset: "system" cpuset of CPUSPEC(0) with 251 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 1 0 Soth init [5] root 2 0 Soth [kthreadd] root 84 2 Sf50 [IRQ-9] ... alext 31796 31789 Soth less root 32653 25222 Roth python ./cset shield --unshield -v -------------------------------------------------------------------- Note that I abbreviated the listing; we do have 251 tasks running in the 'system' set. The output is self-explanatory; however, the "SPPr" field may need a little explanation. "SPPr" stands for State, Policy and Priority. You can see that the initial two tasks are Stopped and running in timeshare priority, marked as "oth" (for "other"). The [IRQ-9] task is also stopped, but marked at real time FIFO policy with a priority of 50. The last task in the listing is the *cset* command itself and is marked as running. Also note that adding a second +-v/\--verbose+ option will not restrict the output to fit into an 80 character screen. Tear down of the shield, stopping the shield in other words, is done with the +-r/\--reset+ option to the +shield+ subcommand. When this command is issued, both the 'system' and 'user' cpusets are deleted and any tasks that are running in both of those cpusets are moved to the 'root' cpuset. Once so moved, all tasks will have access to all resources on the system. For example: -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield --reset cset: --> deactivating/reseting shielding cset: moving 0 tasks from "/user" user set to root set... cset: moving 250 tasks from "/system" system set to root set... [==================================================]% cset: deleting "/user" and "/system" sets cset: done -------------------------------------------------------------------- Moving Interesting Tasks Into and Out of the Shield ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Now that we have a shield running, the objective is to run our "important" processes in that shield. These processes can be anything, but usually they are directly related to the purpose of the machine. There are two ways to run tasks in the shield: . Exec a process into the shield . Move an already running task into the shield Execing a Process into the Shield ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Running a new process in the shield can be done with the +-e/\--exec+ option to the +shield+ subcommand. This is the simplest way to get a task to run in the shield. For this example, let's exec a new bash shell into the shield with the following commands. -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield -s cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running cset: done [zuul:cpuset-trunk]# cset shield -e bash cset: --> last message, executed args into cpuset "/user", new pid is: 13300 [zuul:cpuset-trunk]# cset shield -s -v cset: "user" cpuset of CPUSPEC(1-3) with 2 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 13300 8583 Soth bash root 13329 13300 Roth python ./cset shield -s -v [zuul:cpuset-trunk]# exit [zuul:cpuset-trunk]# cset shield -s cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running cset: done -------------------------------------------------------------------- The first command above lists the status of the shield. We see that the shield is defined as CPUs 1 through 3 inclusive and currently there are no tasks running in it. The second command execs the bash shell into the shield with the +-e+ option. The last message of cset lists the PID of the new process. NOTE: *cset* follows the tradition of separating the tool options from the command to be execed options with a double dash (+\--+). This is not shown in this simple example, but if the command you want to exec also takes options, separate them with the double dash like so: +# cset shield -e mycommand \-- -v+ The +-v+ will be passed to +mycommand+, and not to *cset*. The next command lists the status of the shield again. You will note that there are actually two tasks running shielded: our new shell and the *cset* status command itself. Remember that the cpuset property of a task is inherited by its children. Since we ran the new shell in the shield, its child, which is the status command, also ran in the shield. TIP: Execing a shell into the shield is a useful way to experiment with running tasks in the shield since all children of the shell will also run in the shield. The last command exits the shell after which we request a shield status again and see that once again, it does not contain any tasks. You may have noticed in the output above that both the new shell and the status command are running as the root user. This is because *cset* needs to run as root and so all it's children will also run as root. If you need to run a process under a different user and or group, you may use the +\--user+ and +\--group+ options for +exec+ as follows. -------------------------------------------------------------------- [zuul:cpuset-trunk]# cset shield --user=alext --group=users -e bash cset: --> last message, executed args into cpuset "/user", new pid is: 14212 alext@zuul> cset shield -s -v cset: "user" cpuset of CPUSPEC(1-3) with 2 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- alext 14212 8583 Soth bash alext 14241 14212 Roth python ./cset shield -s -v -------------------------------------------------------------------- Moving a Running Task into and out of the Shield ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ While execing a process into the shield is undoubtably useful, most of the time, you'll want to move already running tasks into and out of the shield. The *cset* shield subcommand includes two options for doing this: +-s/\--shield+ and +-u/\--unshield+. These options require what's called a PIDSPEC (process specification) to also be specified with the +-p/\--pid+ option. The PIDSPEC defines which tasks get operated on. The PIDSPEC can be a single process ID, a list of process IDs separated by commas, and a list of process ID ranges separated by dashes, groups of which are separated by commas. For example: +\--shield --pid 1234+:: This PIDSPEC argument specifies that PID 1234 be shielded. +\--shield --pid 1234,42,1934,15000,15001,15002+:: This PIDSPEC argument specifies that this list of PIDs only be moved into the shield. +\--unshield -p 5000,5100,6010-7000,9232+:: This PIDSPEC argument specifies that PIDs 5000,5100 and 9232 be unshielded (moved out of the shield) along with any existing PID that is in the range 6010 through 7000 inclusive. NOTE: A range in a PIDSPEC does not have to have tasks running for every number in that range. In fact, it is not even an error if there are no tasks running in that range; none will be moved in that case. The range simply specifies to act on any tasks that have a PID or TID that is within that range. Use of the appropriate PIDSPEC can thus be handy to move tasks and groups of tasks into and out of the shield. Additionally, there is one more option that can help with multi-threaded processes, and that is the +\--threads+ flag. If this flag is present in a +shield+ or +unshield+ command with a PIDSPEC and if any of the task IDs in the PIDSPEC belong to a thread in a process container, then *all* the sibling threads in that process container will get shielded or unshielded as well. This flag provides an easy mechanism to shield/unshield all threads of a process by simply specifying one thread in that process. In the following example, we move the current shell into the shield with a range PIDSPEC and back out with the bash variable for the current PID. ----------------------------------------------------------------------- [zuul:cpuset-trunk]# echo $$ 22018 [zuul:cpuset-trunk]# cset shield -s -p 22010-22020 cset: --> shielding following pidspec: 22010-22020 cset: done [zuul:cpuset-trunk]# cset shield -s -v cset: "user" cpuset of CPUSPEC(1-3) with 2 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 3770 22018 Roth python ./cset shield -s -v root 22018 5034 Soth bash cset: done [zuul:cpuset-trunk]# cset shield -u -p $$ cset: --> unshielding following pidspec: 22018 cset: done [zuul:cpuset-trunk]# cset shield -s cset: "user" cpuset of CPUSPEC(1-3) with 0 tasks running cset: done ----------------------------------------------------------------------- NOTE: Ordinarily, the +shield+ option will shield a PIDSPEC only if it is currently running in the 'system' set--the unshielded set. The +unshield+ option will unshield a PIDSPEC only if it is currently running in the 'user' set--the shielded set. If you want to +shield/unshield+ a process that happens to be running in the 'root' set (not common), then use the +\--force+ option for these commands. Full Featured Cpuset Manipulation Commands ========================================== While basic shielding as described above is useful and a common use model for *cset*, there comes a time when more functionality will be desired to implement your strategy. To implement this, *cset* provides two subcommands: +set+, which allows you to manipulate cpusets; and +proc+, which allows you to manipulate processes within those cpusets. The Set Subcommand ------------------ In order to do anything with cpusets, you must be able to create, adjust, rename, move and destroy them. The +set+ subcommand allows the management of cpusets in such a manner. Creating and Destroying Cpusets with Set ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The basic syntax of +set+ for cpuset creation is: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -c 1-3 -s my_cpuset1 cset: --> created cpuset "my_cpuset1" ---------------------------------------------------------- This creates a cpuset named "my_cpuset1" with a CPUSPEC of CPU1, CPU2 and CPU3. The CPUSPEC is the same concept as described in the "Setup and Teardown of the Shield" section above. The +set+ subcommand also takes a +-m/\--mem+ option that lets you specify the memory nodes the set will use as well as flags to make the CPUs and MEMs exclusive to the cpuset. If you are on a non-NUMA machine, just leave the +-m+ option out and the default memory node 0 will be used. Just like with +shield+, you can adjust the CPUs and MEMs with subsequent calls to +set+. If, for example, you wish to adjust the "my_cpuset1" cpuset to only use CPUs 1 and 3 (and omit CPU2), then issue the following command. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -c 1,3 -s my_cpuset1 cset: --> modified cpuset "my_cpuset ---------------------------------------------------------- *cset* will then adjust the CPUs that are assigned to the "my_cpuset1" set to only use CPU1 and CPU3. To rename a cpuset, use the +-n/\--newname+ option. For example: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -s my_cpuset1 -n super_set cset: --> renaming "/cpusets/my_cpuset1" to "super_set" ---------------------------------------------------------- Renames the cpuset called "my_cpuset1" to "super_set". To destroy a cpuset, use the +-d/\--destroy+ option as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -d super_set cset: --> processing cpuset "super_set", moving 0 tasks to parent "/"... cset: --> deleting cpuset "/super_set" cset: done ---------------------------------------------------------- This command destroys the newly created cpuset called "super_set". When a cpuset is destroyed, all the tasks running in it are moved to the parent cpuset. The 'root' cpuset, which always exists and always contains all CPUs, can not be destroyed. You may also give the +\--destroy+ option a list of cpusets to destroy. NOTE: The *cset* subcommand creates the cpusets based on a mounted cpuset filesystem. You do not need to know where that filesystem is mounted, although it is easy to figure out (by default it's on '/cpusets'). When you give the +set+ subcommand a name for a new cpuset, it is created wherever the cpuset filesystem is mounted at. If you want to create a cpuset hierarchy, then you must give a path to the *cset* +set+ subcommand. This path will always begin with the 'root' cpuset, for which the path is '/'. For example. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -c 1,3 -s top_set cset: --> created cpuset "top_set" [zuul:cpuset-trunk]# cset set -c 3 -s /top_set/sub_set cset: --> created cpuset "/top_set/sub_set" ---------------------------------------------------------- These commands created two cpusets: 'top_set' and 'sub_set'. The 'top_set' uses CPU1 and CPU3. It has a subset of 'sub_set' which only uses CPU3. Once you have created a subset with a path, then if the name is unique, you do not have to specify the path in order to affect it. If the name is not unique, then *cset* will complain and ask you to use the path. For example: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -c 1,3 -s sub_set cset: --> modified cpuset "sub_set ---------------------------------------------------------- This command adds CPU1 to the 'sub_set' cpuset for it's use. Note that using the path in this case is optional. If you attempt to destroy a cpuset which has sub-cpusets, *cset* will complain and not do it unless you use the +-r/\--recurse+ and the +\--force+ options. If you do use +\--force+, then all the tasks running in all subsets of the deletion target cpuset will be moved to the target's parent cpuset and all cpusets. Moving a cpuset from under a certain cpuset to a different location is currently not implemented and is slated for a later release of *cset*. Listing Cpusets with Set ~~~~~~~~~~~~~~~~~~~~~~~~ To list cpusets, use the +set+ subcommand with the '-l/\--list' option. For example: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -l cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 320 1 / one 3 n 0 n 0 1 /one ---------------------------------------------------------- This shows that there is currently one cpuset present called 'one'. (Of course that there is also the 'root' set, which is always present.) The output shows that the 'one' cpuset has no tasks running in it. The 'root' cpuset has 320 tasks running. The "-X" for "CPUs" and "MEMs" fields denotes whether the CPUs and MEMs in the cpusets are marked exclusive to those cpusets. Note that the 'one' cpuset has subsets as indicated by a 1 in the 'Subs' field. You can specify a cpuset to list with the +set+ subcommand as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -l -s one cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- one 3 n 0 n 0 1 /one two 3 n 0 n 0 1 /one/two ---------------------------------------------------------- This output shows that there is a cpuset called 'two' in cpuset 'one' and it also has subset. You can also ask for a recursive listing as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -l -r cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 320 1 / one 3 n 0 n 0 1 /one two 3 n 0 n 0 1 /one/two three 3 n 0 n 0 0 /one/two/three ---------------------------------------------------------- This command lists all cpusets existing on the system since it asks for a recursive listing beginning at the 'root' cpuset. Incidentally, should you need to specify the 'root' cpuset you can use either +root+ or +/+ to specify it explicitely--just remember that the 'root' cpuset cannot be deleted or modified. The Proc Subcommand ------------------- Now that we know how to create, rename and destroy cpusets with the +set+ subcommand, the next step is to manage threads and processes in those cpusets. The subcommand to do this is called +proc+ and it allows you to exec processes into a cpuset, move existing tasks around existing cpusets, and list tasks running in specified cpusets. For the following examples, let us assume a cpuset setup of two sets as follows: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -l cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 309 2 / two 2 n 0 n 3 0 /two three 3 n 0 n 10 0 /three ---------------------------------------------------------- Listing Tasks with Proc ~~~~~~~~~~~~~~~~~~~~~~~ Operation of the +proc+ subcommand follows the same model as the +set+ subcommand. For example, to list tasks in a cpuset, you need to use the +-l/\--list+ option and specify the cpuset by name or, if the name exists multiple times in the cpuset hierarchy, by path. For example: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 3 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 16141 4300 Soth bash root 16171 16141 Soth bash root 16703 16171 Roth python ./cset proc -l two ---------------------------------------------------------- This output shows us that the cpuset called 'two' has CPU2 only attached to it and is running three tasks: two shells and the python command to list it. Note that cpusets are inherited so that if a process is contained in a cpuset, then any children it spawns also run within that set. In this case, the python command to list set 'two' was run from a shell already running in set 'two'. This can be seen by the PPID (parent process ID) of the python command matching the PID of the shell. Additionally, the "SPPr" field needs explanation. "SPPr" stands for State, Policy and Priority. You can see that the initial two tasks are Stopped and running in timeshare priority, marked as "oth" (for "other"). The last task is marked as running, "R" and also at timeshare priority, "oth." If any of these tasks would have been at real time priority, then the policy would be shown as "f" for FIFO or "r" for round robin, and the priority would be a number from 1 to 99. See below for an example. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s root | head -7 cset: "root" cpuset of CPUSPEC(0-3) with 309 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 1 0 Soth init [5] root 2 0 Soth [kthreadd] root 3 2 Sf99 [migration/0] root 4 2 Sf99 [posix_cpu_timer] ---------------------------------------------------------- This output shows the first few tasks in the 'root' cpuset. Note that both 'init' and '[kthread]' are running at timeshare; however, the '[migration/0]' and '[posix_cpu_timer]' kernel threads are running at real time policy of FIFO and priority of 99. Incidentally, this output is from a system running the real time Linux kernel which runs some kernel threads at real time priorities. And finally, note that you can of course use *cset* as any other Linux tool and include it in pipelines as in the example above. Taking a peek into the third cpuset called 'three', we see: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s three cset: "three" cpuset of CPUSPEC(3) with 10 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- alext 16165 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16169 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16170 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16237 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16491 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16492 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16493 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17243 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17244 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17265 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... ---------------------------------------------------------- This output shows that a lot of 'beagled' tasks are running in this cpuset and it also shows an ellipsis (...) at the end of their listings. If you see this ellipsis, that means that the command was too long to fit onto an 80 character screen. To see the entire commandline, use the +-v/\--verbose+ flag, as per following. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s three -v | head -4 cset: "three" cpuset of CPUSPEC(3) with 10 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- alext 16165 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg --autostarted --indexing-delay 300 ---------------------------------------------------------- Execing Tasks with Proc ~~~~~~~~~~~~~~~~~~~~~~~ To exec a task into a cpuset, the +proc+ subcommand needs to be employed with the +-e/\--exec+ option. Let's exec a shell into the cpuset named 'two' in our set. First we check to see what is running that set: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 0 tasks running [zuul:cpuset-trunk]# cset proc -s two -e bash cset: --> last message, executed args into cpuset "/two", new pid is: 20955 [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 2 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 20955 19253 Soth bash root 20981 20955 Roth python ./cset proc -l two ---------------------------------------------------------- You can see that initially, 'two' had nothing running in it. After the completion of the second command, we list 'two' again and see that there are two tasks running: the shell which we execed and the python *cset* command that is listing the cpuset. The reason for the second task is that the cpuset property of a running task is inherited by all its children. Since we executed the listing command from the new shell which was bound to cpuset 'two', the resulting process for the listing is also bound to cpuset 'two'. Let's test that by just running a new shell with no prefixed *cset* command. ---------------------------------------------------------- [zuul:cpuset-trunk]# bash [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 3 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 20955 19253 Soth bash root 21118 20955 Soth bash root 21147 21118 Roth python ./cset proc -l two ---------------------------------------------------------- Here again we see that the second shell, PID 21118, has a parent PID of 20955 which is the first shell. Both shells as well as the listing command are running in the 'two' cpuset. NOTE: *cset* follows the tradition of separating the tool options from the command to be execed options with a double dash (+\--+). This is not shown in this simple example, but if the command you want to exec also takes options, separate them with the double dash like so: +# cset proc -s myset -e mycommand \-- -v+ The +-v+ will be passed to +mycommand+, and not to *cset*. TIP: Execing a shell into a cpuset is a useful way to experiment with running tasks in that cpuset since all children of the shell will also run in the same cpuset. Finally, if you misspell the command to be execed, the result may be puzzling. For example: ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -s two -e blah-blah cset: --> last message, executed args into cpuset "/two", new pid is: 21655 cset: **> [Errno 2] No such file or directory ---------------------------------------------------------- The result is no new process even though a new PID is output. The reason for the message is of course that the *cset* process forked in preparation for exec, but the command +blah-blah+ was not found in order to exec it. Moving Tasks with Proc ~~~~~~~~~~~~~~~~~~~~~~ Although the ability to exec a task into a cpuset is fundamental, you will most likely be moving tasks between cpusets more often. Moving tasks is accomplished with the +-m/\--move+ and +-p/\--pid+ options to the +proc+ subcommand of *cset*. The move option tells the +proc+ subcommand that a task move is requested. The +-p/\--pid+ option takes an argument called a PIDSPEC (PID Specification). The PIDSPEC defines which tasks get operated on. The PIDSPEC can be a single process ID, a list of process IDs separated by commas, and a list of process ID ranges also separated by commas. For example: +\--move --pid 1234+:: This PIDSPEC argument specifies that task 1234 be moved. +\--move --pid 1234,42,1934,15000,15001,15002+:: This PIDSPEC argument specifies that this list of tasks only be moved. +\--move --pid 5000,5100,6010-7000,9232+:: This PIDSPEC argument specifies that tasks 5000,5100 and 9232 be moved along with any existing task that is in the range 6010 through 7000 inclusive. NOTE: A range in a PIDSPEC does not have to have running tasks for every number in that range. In fact, it is not even an error if there are no tasks running in that range; none will be moved in that case. The range simply specifies to act on any tasks that have a PID or TID that is within that range. In the following example, we move the current shell into the cpuset named 'two' with a range PIDSPEC and back out to the 'root' cpuset with the bash variable for the current PID. ----------------------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 0 tasks running [zuul:cpuset-trunk]# echo $$ 19253 [zuul:cpuset-trunk]# cset proc -m -p 19250-19260 -t two cset: moving following pidspec: 19253 cset: moving 1 userspace tasks to /two cset: done [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 2 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 19253 16447 Roth bash root 29456 19253 Roth python ./cset proc -l -s two [zuul:cpuset-trunk]# cset proc -m -p $$ -t root cset: moving following pidspec: 19253 cset: moving 1 userspace tasks to / cset: done [zuul:cpuset-trunk]# cset proc -l -s two cset: "two" cpuset of CPUSPEC(2) with 0 tasks running ----------------------------------------------------------------------- Use of the appropriate PIDSPEC can thus be handy to move tasks and groups of tasks. Additionally, there is one more option that can help with multi-threaded processes, and that is the +\--threads+ flag. If this flag is present in a +proc+ move command with a PIDSPEC and if any of the task IDs in the PIDSPEC belongs to a thread in a process container, then *all* the sibling threads in that process container will also get moved. This flag provides an easy mechanism to move all threads of a process by simply specifying one thread in that process. In the following example, we move all the threads running in cpuset 'three' to cpuset 'two' by using the +\--threads+ flag. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set two three cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- two 2 n 0 n 0 0 /two three 3 n 0 n 10 0 /three [zuul:cpuset-trunk]# cset proc -l -s three cset: "three" cpuset of CPUSPEC(3) with 10 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- alext 16165 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16169 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16170 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16237 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16491 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16492 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16493 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17243 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17244 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 27133 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... [zuul:cpuset-trunk]# cset proc -m -p 16165 --threads -t two cset: moving following pidspec: 16491,16493,16492,16170,16165,16169,27133,17244,17243,16237 cset: moving 10 userspace tasks to /two [==================================================]% cset: done [zuul:cpuset-trunk]# cset set two three cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- two 2 n 0 n 10 0 /two three 3 n 0 n 0 0 /three ---------------------------------------------------------- Moving All Tasks from one Cpuset to Another ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ There is a special case for moving all tasks currently running in one cpuset to another. This can be a common use case, and when you need to do it, specifying a PIDSPEC with +-p+ is not necessary 'so long as' you use the +-f/\--fromset+ *and* the +-t/\--toset+ options. In the following example, we move all 10 +beagled+ threads back to cpuset 'three' with this method. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l two three cset: "two" cpuset of CPUSPEC(2) with 10 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- alext 16165 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16169 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16170 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16237 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16491 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16492 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 16493 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17243 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 17244 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... alext 27133 1 Soth beagled /usr/lib64/beagle/BeagleDaemon.exe --bg -... cset: "three" cpuset of CPUSPEC(3) with 0 tasks running [zuul:cpuset-trunk]# cset proc -m -f two -t three cset: moving all tasks from two to /three cset: moving 10 userspace tasks to /three [==================================================]% cset: done [zuul:cpuset-trunk]# cset set two three cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- two 2 n 0 n 0 0 /two three 3 n 0 n 10 0 /three ---------------------------------------------------------- Moving Kernel Threads with Proc ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Kernel threads are special and *cset* detects tasks that are kernel threads and will refuse to move them unless you also add a +-k/\--kthread+ option to your +proc+ move command. Even if you include +-k+, *cset* will 'still' refuse to move the kernel thread if they are bound to specific CPUs. The reason for this is system protection. A number of kernel threads, especially on the real time Linux kernel, are bound to specific CPUs and depend on per-CPU kernel variables. If you move these threads to a different CPU than what they are bound to, you risk at best that the system will become horribly slow, and at worst a system hang. If you still insist to move those threads (after all, *cset* needs to give the knowledgeable user access to the keys), then you need to use the +--force+ option additionally. WARNING: Overriding a task move command with +--force+ can have dire consequences for the system. Please be sure of the command before you force it. In the following example, we move all unbound kernel threads running in the 'root' cpuset to the cpuset named 'two' by using the +-k+ option. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -k -f root -t two cset: moving all kernel threads from / to /two cset: moving 70 kernel threads to: /two cset: --> not moving 76 threads (not unbound, use --force) [==================================================]% cset: done ---------------------------------------------------------- You will note that we used the fromset->toset facility of the +proc+ subcommand and we only specified the +-k+ option (not the +-m+ option). This has the effect of moving all kernel threads only. Note that only 70 actual kernel threads were moved and 76 were not. The reason that 76 kernel threads were not moved was because they are bound to specific CPUs. Now, let's move those kernel threads back to 'root'. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -k -f two -t root cset: moving all kernel threads from /two to / cset: ** no task matched move criteria cset: **> kernel tasks are bound, use --force if ok [zuul:cpuset-trunk]# cset set -l -s two cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- two 2 n 0 n 70 0 /two ---------------------------------------------------------- Ah! What's this? *Cset* refused to move the kernel threads back to 'root' because it says that they are "bound." Let's check this with the Linux taskset command. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -l -s two | head -5 cset: "two" cpuset of CPUSPEC(2) with 70 tasks running USER PID PPID SPPr TASK NAME -------- ----- ----- ---- --------- root 2 0 Soth [kthreadd] root 55 2 Soth [khelper] [zuul:cpuset-trunk]# taskset -p 2 pid 2's current affinity mask: 4 [zuul:cpuset-trunk]# cset set -l -s two cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- two 2 n 0 n 70 0 /two ---------------------------------------------------------- Of course, since the cpuset named 'two' only has CPU2 assigned to it, once we moved the unbound kernel threads from 'root' to 'two', their affinity masks got automatically changed to only use CPU2. This is evident from the +taskset+ output which is a hex value. To really move these threads back to 'root', we need to force the move as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -k -f two -t root --force cset: moving all kernel threads from /two to / cset: moving 70 kernel threads to: / [==================================================]% cset: done ---------------------------------------------------------- Destroying Tasks ~~~~~~~~~~~~~~~~ There actually is no *cset* subcommand or option to destroy tasks--it's not really needed. Tasks exist and are accessible on the system as normal, even if they happen to be running in one cpuset or another. To destroy tasks, use the usual ^C method or by using the *kill(1)* command. Implementing "Shielding" with Set and Proc ------------------------------------------ With the preceding material on the +set+ and +proc+ subcommands, we now have the background to implement the basic shielding model, just like the +shield+ subcommand. One may pose the question as to why we want to do this, especially since +shield+ already does it? The answer is that sometimes one needs more functionality than +shield+ has to implement one's shielding strategy. In those case you need to first stop using +shield+ since that subcommand will interfere with the further application of +set+ and +proc+; however, you will still need to implement the functionality of +shield+ in order to implement successful shielding. Remember from the above sections describing +shield+, that shielding has at minimum three cpusets: 'root', which is always present and contains all CPUs; 'system' which is the "non-shielded" set of CPUs and runs unimportant system tasks; and 'user', which is the "shielded" set of CPUs and runs your important tasks. Remember also that +shield+ moves all movable tasks into 'system' and, optionally, moves unbound kernel threads into 'system' as well. We start first by creating the 'system' and 'user' cpusets as follows. We assume that the machine is a four-CPU machine without NUMA memory features. The 'system' cpuset should hold only CPU0 while the 'user' cpuset should hold the rest of the CPUs. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -c 0 -s system cset: --> created cpuset "system" [zuul:cpuset-trunk]# cset set -c 1-3 -s user cset: --> created cpuset "user" [zuul:cpuset-trunk]# cset set -l cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 333 2 / user 1-3 n 0 n 0 0 /user system 0 n 0 n 0 0 /system ---------------------------------------------------------- Now, we need to move all running user processes into the 'system' cpuset. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -m -f root -t system cset: moving all tasks from root to /system cset: moving 188 userspace tasks to /system [==================================================]% cset: done [zuul:cpuset-trunk]# cset set -l cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 146 2 / user 1-3 n 0 n 0 0 /user system 0 n 0 n 187 0 /system ---------------------------------------------------------- We now have the basic shielding set up. Since all userspace tasks are running in 'system', anything that is spawned from them will also run in 'system'. The 'user' cpuset has nothing running in it unless you put tasks there with the +proc+ subcommand as described above. If you also want to move movable kernel threads from 'root' to 'system' (in order to achieve a form of "interrupt shielding" on a real time Linux kernel for example), you would execute the following command as well. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -k -f root -t system cset: moving all kernel threads from / to /system cset: moving 70 kernel threads to: /system cset: --> not moving 76 threads (not unbound, use --force) [==================================================]% cset: done [zuul:cpuset-trunk]# cset set -l cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 76 2 / user 1-3 n 0 n 0 0 /user system 0 n 0 n 257 0 /system ---------------------------------------------------------- At this point, you have achieved the simple shielding model that the +shield+ subcommand provides. You can now add other cpuset definitions to expand your shielding strategy beyond that simple model. Implementing Hierarchy with Set and Proc ---------------------------------------- One popular extended "shielding" model is based on hierarchical cpusets, each with diminishing numbers of CPUs. This model is used to create "priority cpusets" that allow assignment of CPU resources to tasks based on some arbitrary priority definition. The idea being that a higher priority task will get access to more CPU resources than a lower priority task. The example provided here once again assumes a machine with four CPUs and no NUMA memory features. This base serves to illustrate the point well; however, note that if your machine has (many) more CPUs, then strategies such as this and others get more interesting. We define a shielding set up as in the previous section where we have a 'system' cpuset with just CPU0 that takes care of "unimportant" system tasks. One usually requires this type of cpuset since it forms the basis of shielding. We modify the strategy to not use a 'user' cpuset, instead we create a number of new cpusets each holding one more CPU than the other. These cpusets will be called 'prio_low' with one CPU, 'prio_med' with two CPUs, 'prio_high' with three CPUs, and 'prio_all' with all CPUs. NOTE: One may ask, why create a 'prio_all' with all CPUs when that is substantially the definition of the 'root' cpuset? The answer is that it is best to keep a separation between the 'root' cpuset and everything else, even if a particular cpuset duplicates 'root' exactly. Usually, one builds automation on top of a cpuset strategy. In these cases, it is best to avoid using invariant names of cpusets, such as 'root' for example, in this automation. All of these 'prio_*' cpusets can be created under root, in a flat way; however, it is advantageous to create them as a hierarchy. The reasoning for this is twofold: first, if a cpuset is destroyed, all its tasks are moved to its parent; second, one can use exclusive CPUs in a hierarchy. There is a planned addition to the +proc+ subcommand that will allow moving a specified PIDSPEC of tasks running in a specified cpuset to its parent. This addition will ease the automation burden. If a cpuset has CPUs that are exclusive to it, then other cpusets may not make use of those CPUs unless they are children of that cpuset. This has more relevance to machines with many CPUs and more complex strategies. Now, we start with a clean slate and build the appropriate cpusets as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -r cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 344 0 / [zuul:cpuset-trunk]# cset set -c 0-3 prio_all cset: --> created cpuset "prio_all" [zuul:cpuset-trunk]# cset set -c 1-3 /prio_all/prio_high cset: --> created cpuset "/prio_all/prio_high" [zuul:cpuset-trunk]# cset set -c 2-3 /prio_all/prio_high/prio_med cset: --> created cpuset "/prio_all/prio_high/prio_med" [zuul:cpuset-trunk]# cset set -c 3 /prio_all/prio_high/prio_med/prio_low cset: --> created cpuset "/prio_all/prio_high/prio_med/prio_low" [zuul:cpuset-trunk]# cset set -c 0 system cset: --> created cpuset "system" [zuul:cpuset-trunk]# cset set -l -r cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 344 2 / system 0 n 0 n 0 0 /system prio_all 0-3 n 0 n 0 1 /prio_all prio_high 1-3 n 0 n 0 1 /prio_all/prio_high prio_med 2-3 n 0 n 0 1 /prio_all/prio_high/prio_med prio_low 3 n 0 n 0 0 /prio_all/pr...rio_med/prio_low ---------------------------------------------------------- NOTE: We used the +-r/\--recurse+ switch to list all the sets in the last command above. If we had not, then the 'prio_med' and 'prio_low' cpusets would not have been listed. The strategy is now implemented and we now move all userspace tasks as well as all movable kernel threads into the 'system' cpuset to activate the shield. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset proc -m -k -f root -t system cset: moving all tasks from root to /system cset: moving 198 userspace tasks to /system cset: moving 70 kernel threads to: /system cset: --> not moving 76 threads (not unbound, use --force) [==================================================]% cset: done [zuul:cpuset-trunk]# cset set -l -r cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 76 2 / system 0 n 0 n 268 0 /system prio_all 0-3 n 0 n 0 1 /prio_all prio_high 1-3 n 0 n 0 1 /prio_all/prio_high prio_med 2-3 n 0 n 0 1 /prio_all/prio_high/prio_med prio_low 3 n 0 n 0 0 /prio_all/pr...rio_med/prio_low ---------------------------------------------------------- The shield is now active. Since the 'prio_*' cpuset names are unique, one can assign tasks to them either via either their simple name, or their full path (as described in the +proc+ section above). You may have noted that there is an ellipsis in the path of the 'prio_low' cpuset in the listing above. This is done in order to fit the output onto an 80 character screen. If you want to see the entire line, then you need to use the +-v/\--verbose+ flag as follows. ---------------------------------------------------------- [zuul:cpuset-trunk]# cset set -l -r -v cset: Name CPUs-X MEMs-X Tasks Subs Path ------------ ---------- - ------- - ----- ---- ---------- root 0-3 y 0 y 76 2 / system 0 n 0 n 268 0 /system prio_all 0-3 n 0 n 0 1 /prio_all prio_high 1-3 n 0 n 0 1 /prio_all/prio_high prio_med 2-3 n 0 n 0 1 /prio_all/prio_high/prio_med prio_low 3 n 0 n 0 0 /prio_all/prio_high/prio_med/prio_low ---------------------------------------------------------- Using Shortcuts =============== The commands listed in the previous sections always used all the required options. *Cset* however does have a shortcut facility that will execute certain commands without specifying all options. An effort has been made to do this with the "principle of least surprise." This means that if you do not specify options, but do specify parameters, then the outcome of the command should be intuitive. As much as possible. Using shortcuts is of course not necessary. In fact, you can not only not use shortcuts, but you can use long options instead of short, in case you really enjoy typing... All kidding aside, using long options and not using shortcuts does have a use case: when you write a script intended to be self-documenting, or perhaps when you generate *cset* documentation. To begin, the subcommands +shield+, +set+ and +proc+ can themselves be shortened to the fewest number of characters that are unambiguous. For example, the following commands are identical: ---------------------------------------------------------- # cset shield -s -p 1234 <--> # cset sh -s -p 1234 # cset set -c 1,3 -s newset <--> # cset se -c 1,3 -s newset # cset proc -s newset -e bash <--> # cset p -s newset -e bash ---------------------------------------------------------- Note that +proc+ can be shortened to just +p+, while +shield+ and +set+ need two letters to disambiguate. Shield Subcommand Shortcuts --------------------------- The +shield+ subcommand supports two areas with shortcuts: the case when there is no options given where to 'shield' is the common use case, and making the +-p/\--pid+ option 'optional' for the +-s/\--shield+ and +-u/\--unshield+ options. For the common use case of actually 'shielding' either a PIDSPEC or execing a command into the shield, the following *cset* commands are equivalent. ----------------------------------------------------------- # cset shield -s -p 1234,500-649 <--> # cset sh 1234,500-649 # cset shield -s -e bash <--> # cset sh bash ----------------------------------------------------------- When using the +-s+ or +-u+ shield/unshield options, it is optional to use the +-p+ option to specify a PIDSPEC. For example: ----------------------------------------------------------- # cset shield -s -p 1234 <--> # cset sh -s 1234 # cset shield -u -p 1234 <--> # cset sh -u 1234 ----------------------------------------------------------- Set Subcommand Shortcuts ------------------------ The +set+ subcommand has a limited number of shortcuts. Basically, the +-s/\--set+ option is optional in most cases and the +-l/\--list+ option is also optional if you want to list sets. For example, these commands are equivalent. ----------------------------------------------------------- # cset set -l -s myset <--> # cset se -l myset # cset se -l myset <--> # cset se myset # cset set -c 1,2,3 -s newset <--> # cset se -c 1,2,3 newset # cset set -d -s newset <--> # cset se -d newset # cset set -n newname -s oldname <--> # cset se -n newname oldname ----------------------------------------------------------- In fact, if you want to apply either the list or the destroy options to multiple cpusets with one *cset* command, you'll need to not use the +-s+ option. For example: ----------------------------------------------------------- # cset se -d myset yourset ourset --> destroys cpusets: myset, yourset and ourset # cset se -l prio_high prio_med prio_low --> lists only cpusets prio_high, prio_med and prio_low --> the -l is optional in this case since list is default ----------------------------------------------------------- Proc Subcommand Shortcuts ------------------------- For the +proc+ subcommand, the +-s+, +-t+ and +-f+ options to specify the cpuset, the origination cpuset and the destination cpuset, can sometimes be optional. For example, the following commands are equivalent. ----------------------------------------------------------- To list tasks in cpusets: # cset proc -l -s myset \ # cset proc -l -f myset --> # cset p -l myset # cset proc -l -t myset / # cset p -l myset <--> # cset p myset # cset proc -l -s one two <--> # cset p -l one two # cset p -l one two <--> # cset p one two To exec a process into a cpuset: # cset proc -s myset -e bash <--> # cset p myset -e bash ----------------------------------------------------------- Movement of tasks into and out of cpusets have the following shortcuts. ----------------------------------------------------------- To move a PIDSPEC into a cpuset: # cset proc -m -p 4242,4243 -s myset <--> # cset p -m 4242,4243 myset # cset proc -m -p 12 -t myset <--> # cset p -m 12 myset To move all tasks from one cpuset to another: # cset proc -m -f set1 -t set2 \ # cset proc -m -s set1 -t set2 --> # cset p -m set1 set2 # cset proc -m -f set1 -s set2 / ----------------------------------------------------------- What To Do if There are Problems ================================ If you encounter problems with the *cset* application, the best option is to log a bug with the *cset* bugzilla instance found here: https://github.com/lpechacek/cpuset/issues If you are using *cset* on a supported operating system such as SLES or SLERT from Novell, then please use that bugzilla instead at: https://bugzilla.suse.com If the problem is repeatable, there is an excellent chance that it will get fixed quickly. Also, *cset* contains a logging facility that is invaluable for the developers to diagnose problems. To create a log of a run, use the +-l/\--log+ option with a filename as an argument to the main *cset* application. For example. ------------------------------------------------------------- # cset -l logfile.txt set -n newname oldname ------------------------------------------------------------- That command saves a lot of debugging information in the 'logfile.txt' file. Please attach this file to the bug.