You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
69 lines
2.8 KiB
C
69 lines
2.8 KiB
C
// FARM DATA RELAY SYSTEM
|
|
|
|
// Global Configuration
|
|
|
|
// Developed by Timm Bogner (timmbogner@gmail.com) in Urbana, Illinois, USA.
|
|
#ifndef __FDRS_GLOBALS_h__
|
|
#define __FDRS_GLOBALS_h__
|
|
|
|
#define GLOBAL_DBG_LEVEL 0
|
|
|
|
|
|
#define GLOBAL_WIFI_SSID "Your SSID"
|
|
#define GLOBAL_WIFI_PASS "Password"
|
|
|
|
#define GLOBAL_DNS1_IPADDRESS "8.8.8.8" // Default to Google Primary DNS
|
|
#define GLOBAL_DNS2_IPADDRESS "8.8.4.4" // Default to Google Secondary DNS
|
|
|
|
#define GLOBAL_MQTT_ADDR "192.168.0.8"
|
|
#define GLOBAL_MQTT_PORT 1883
|
|
|
|
//#define GLOBAL_MQTT_AUTH //uncomment to enable MQTT authentication
|
|
#define GLOBAL_MQTT_USER "Your MQTT Username"
|
|
#define GLOBAL_MQTT_PASS "Your MQTT Password"
|
|
// MQTT Topics
|
|
#define TOPIC_DATA "fdrs/data"
|
|
#define TOPIC_STATUS "fdrs/status"
|
|
#define TOPIC_COMMAND "fdrs/command"
|
|
#define TOPIC_DATA_BACKLOG "fdrs/databacklog" // Used in filesystem module
|
|
|
|
// NTP Time Server
|
|
#define GLOBAL_TIME_SERVER "0.us.pool.ntp.org"
|
|
#define GLOBAL_LOCAL_OFFSET (-5) // Time in hours between local time and UTC
|
|
#define GLOBAL_TIME_FETCHNTP 60 // Time in minutes between fetching time from NTP server
|
|
#define GLOBAL_TIME_PRINTTIME 15 // Time in minutes between printing local time
|
|
#define GLOBAL_TIME_SEND_INTERVAL 60 // Time in minutes between sending out time
|
|
|
|
|
|
#define GLOBAL_LORA_FREQUENCY 915.0 // Carrier frequency in MHz. Allowed values range from 137.0 MHz to 1020.0 MHz (varies by chip).
|
|
#define GLOBAL_LORA_SF 7 // LoRa link spreading factor. Allowed values range from 6 to 12.
|
|
#define GLOBAL_LORA_BANDWIDTH 125.0 // LoRa link bandwidth in kHz. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
|
#define GLOBAL_LORA_CR 5 // LoRa link coding rate denominator. Allowed values range from 5 to 8.
|
|
#define GLOBAL_LORA_SYNCWORD 0x12 // LoRa sync word. Can be used to distinguish different LoRa networks. Note that 0x34 is reserved for LoRaWAN.
|
|
#define GLOBAL_LORA_INTERVAL 5000 // Interval between LoRa buffer releases. Must be longer than transmission time-on-air.
|
|
|
|
#define MAC_PREFIX 0xAA, 0xBB, 0xCC, 0xDD, 0xEE // MAC address prefix. Can be used to distinguish different ESP-NOW networks.
|
|
|
|
#if defined(USE_OLED) || defined(USE_RTC_DS3231) || defined(USE_RTC_DS1307)
|
|
#define USE_I2C
|
|
#endif
|
|
|
|
#if defined(USE_RTC_DS3231) || defined(USE_RTC_DS1307)
|
|
#define USE_RTC
|
|
#endif
|
|
|
|
#if defined(USE_GPS) && defined(ESP8266)
|
|
#error "For ESP8266 only one UART has both Tx and Rx capabilities. GPS not supported for ESP8266"
|
|
#endif
|
|
|
|
#if defined(USE_ETHERNET) && !defined(ESP32)
|
|
#error "Ethernet only supported for ESP32."
|
|
#endif
|
|
|
|
#if defined(USE_OLED) && (!defined(ESP32) && !defined(ESP8266))
|
|
#warning "OLED current supported for only ESP32 or ESP8266."
|
|
#undef USE_OLED
|
|
#endif
|
|
|
|
#endif // __FDRS_GLOBALS_h__
|